brother 882-W33 Sewing Machine User Guide

882-W33 Sewing Machine
User Guide

882-W33 Sewing Machine

Quick Reference Guide

Refer to the Operation Manual for detailed instructions
In this guide, English screens are used for basic explanations,
For details on the built-in embroidery patterns, refer to the Embroidery Design Guide.

Wireless Network Connection Functions

Operations Available with a Wireless Network Connection
This machine supports a wireless network connection. The following useful operations will be available if the machine is connected to a wireless network.
For upgrading
Directly download the update file to the machine. For embroidering
Memo
« For details on each function, refer to the Operation Manual (Embroidery).
« Conveniently check the operating status of the machine from your smart device by using the dedcated mobile application (My Stitch Monitor). Transfer an image from the smart device to the machine to create a design in My Design Center by using the dedicated mobile application (My Design Snap). * Wirelessly transfer an embroidery pattem from your computer to the machine by using the dedicated Windows application (Design Database Transfer).
The application can be downloaded from the following URL. https://s.brother/cadka/

• Settings must be specified in Design Database Transfer. For more information, refer to the manual for Design Database Transfer. * Wirelessly transfer to the machine an embroidery pattern edited with embroidery editing software (PE-DESIGN version 11 or later) on a computer. Also, transfer to PE-DESIGN an embroidery pattem edited on the machine.
• Settings must be specified in PE- DESIGN. For more information, refer to the manual for PE-DESIGN.

Wireless Network Connection

When you first turn on the machine, the following message about a wireless LAN connection appears.
To set up a connection, touch OK and then continue with step 5. 3. Find your security information (SSID and network key) and note it Touch > beside “Wireless LAN Setup Wizard”. Enter the network key (password) that was noted, and then touch OK.

Winding the Bobbin

Follow the numbered steps in the following sections in order. Refer to the operation manual for detailed instruction.
Use the plastic bobbin that comes with this machine or bobbins of the same type.
Bobbin included with the machine is Class 15 type bobbin. Using the Supplemental Spool Pin
You can wind the bobbin during sewing,

Using the Spool Pin
You can use the main spool pin to wind the bobbin before sewing.

Setting the Bobbin

Refer to the operation manual for detailed instruction.

Upper Threading

Preparing to Embroider

Care and Maintenance

CAUTION
Be sure to unplug the machine before  cleaning it. Otherwise, injury mayresult.

Restrictions on oiling
In order to prevent damaging this machine, it must not be oiled by the user. This machine was manufactured with the necessary amount of oil applied to ensure correct operation, making periodiic oiling unnecessary.
If problems occur, such as difficulty tuming the handwheel or an unusual noise, immediately stop using the machine, and contact your authorized Brother dealer or the nearest Brother authorized service center.
Precautions on storing the machine
Do not store the machine in any of the locations described below, otherwise damage to the machine may result, for example, rust caused by condensation.

• Exposed to extremely high temperatures
• Exposed to extremely low temperatures
• Exposed to extreme temperature changes
• Exposed to high humidity or steam
• Near a flame, heater or air conditioner
• Outdoors or exposed to direct sunlight
• Exposed to extremely dusty or oily environments

Note
In order to extend the life of this machine, periodically turn it on and use it. Storing this machine for an extended period of time without using it may reduce its efficiency.
Cleaning the LCD Screen
If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth.
Memo
Occasionally, condensation may form on the LCD screen or it may become fogged up; however, this is not a malfunction. After a while, the cloudiness will disappear.
Cleaning the Machine Casing
When wiping dit off the machine, firmly wring a soft cloth soaked in (lukewarm) water. After cleaning the machine, dry it with a soft, dry cloth.
TROUBLESHOOTING

to unlock all keys and buttons.
Nothing appears in the LCD.| Main power switch is not turned on.| Turn the main power to ON.
The plug of the power cord is not inserted into an electrical outlet.| Insert the plug of the power cord into an electrical outlet.
Nothing happens, even if the LCD display is touched.| The screen has been locked.| Touch either of the following keys to unlock the screen.

Cleaning the Race

CAUTION
Be sure to unplug the machine before cleaning it. Otherwise, injury may result.

Viewing Manuals and Videos on Machine

882-W33

References

• Introducing Design Database Transfer | English

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>