VIVO STAND-V002C Single Monitor And Laptop Desk Mount Instruction Manual

VIVO STAND-V002C Single Monitor And Laptop Desk Mount

Product Information

help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Weight Capacity| 22lbs (9.98kg)

Product Usage Instructions

1. Option A: Desk Clamp Install
   • Loosen Clamp Bolt (B1) on Clamp (B).
   • Install Clamp (B) to Pole (A) using M6x16 Screws (S-D) and 3mm Allen Wrench (T-A).
   • Secure the clamp assembly to the desktop.
2. Option B: Grommet Install
   • Using a Phillips screwdriver, remove the screw from Clamp (B) and separate Clamp Bolt (B1) and Clamp Plate (B2) from the clamp assembly.
   • Thread Clamp Plate (B2) onto Clamp Bolt (B1).
   • Install Grommet Base (F) to Pole (A) using M6x16mm Screws (S-D) and 3mm Allen Wrench (T-A).
   • Remove the adhesive backing from Soft Pad (G) and stick it to the bottom of Grommet Base (F).
   • If not using an existing through-hole for mounting, use a 3/8 (10mm) drill bit to create a mounting hole in the desired location.
   • Thread Clamp Bolt (B1) with Clamp Plate (B2) through the mounting hole and into Pole (A).
3. Slide Arm (C) over Pole (A). Secure Arm (C) at the desired height using a 5mm Allen Wrench (T-B).
4. Insert Pole Cap (J) into the top of Pole (A).
5. Attach Arm Cable Clips (H) to Arm (C) and Pole Cable Clip (I) to Pole (A).
6. Attach VESA Plate (D) to the back of the monitor using M4x12 Thumbscrews (M-A) or M4x30 Screws (M-B) with M4 Spacers (M-C).
7. Assemble VESA Plate (D) to Laptop Tray (E) using M4x8 Screws (S-A) and M4 Nuts (S-B). Tighten using a Wrench (T-C) and a Phillips screwdriver.
8. Slide VESA Plates (D) onto Arms (C). Secure the assembly in place using M6 Nuts (S-C).
9. Place your laptop on Laptop Tray (E).
10. Adjust the tilt using a 5mm Allen Wrench (T-B).

If any parts are received damaged or defective, please contact VIVO’s support team for assistance.

Instruction Manual

WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective pats. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING : CHOKING HAZARD

SMALL PARTS: NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.

TIPOVER WARNING: SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

THE USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

ASSEMBLY STEPS

1. STEP 1
   Option A : Desk Clamp Install
   Loosen Clamp Bolt ( B1 ) on Clamp ( B ). Install Clamp ( B ) to Pole ( A ) using M6x16 Screws ( S – D ) and 3mm Allen Wrench ( T – A ). Secure the clamp assembly to the desktop
   Option B: Grommet Install
   Using a Phillips screwdriver, remove the screw from Clamp ( B ) and separate Clamp Bolt ( B1 ) and Clamp Plate ( B2 ) from the clamp assembly. Thread Clamp Plate ( B2 ) onto Clamp Bolt ( B1 ).
   Install Grommet Base ( F ) to Pole ( A ) using M6x16mm Screws ( S – D ) and 3mm Allen Wrench ( T-A ). Remove the adhesive backing from Soft Pad ( G ) and stick it to the bottom of Grommet Base ( F ).
   If not using an existing through-hole for mounting, use a 3/8” (10mm) drill bit to create a mounting hole in the desired location. Thread Clamp Bolt ( B1 ) with Clamp Plate ( B2 ) through the mounting hole and into Pole ( A ).

2. STEP 2
   Slide Arm ( C ) over Pole ( A ). Secure Arm ( C ) at the desired height using a 5mm Allen Wrench ( T – B ).

3. STEP 3
   Slide Arm ( C ) over Pole ( A ). Secure Arm ( C ) at the desired height using a 5mm Allen Wrench ( T – B ). Insert Pole Cap ( J ) into the top of Pole ( A ).

4. STEP 4
   Attach Arm Cable Clips ( H ) to Arm ( C ) and Pole Cable Clip ( I ) to Pole ( A ).

5. STEP 5
   Attach VESA Plate ( D ) to the back of the monitor using M4x12 Thumbscrews ( M – A ) or M4x30 Screws ( M – B ) with M4 Spacers ( M – C ).

6. STEP 6
   Assemble VESA Plate ( D ) to Laptop Tray ( E ) using M4x8 Screws ( S – A ) and M4 Nuts ( S – B ). Tighten using a Wrench ( T – C ) and a Phillips screwdriver.

7. STEP 7
   Slide VESA Plates ( D ) onto Arms ( C ). Secure the assembly in place using M6 Nuts ( S – C ).

8. STEP 8
   Place your laptop on Laptop Tray ( E ).

9. STEP 9
   Adjust the tilt using a 5mm Allen Wrench ( T – B ).

SKU: STAND-V002C/CW
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products /stand-v002c

GET IN TOUCH
Monday-Friday from 7:00 am-7:00 pm CST

• help@vivo-us.com
• www.vivo-us.com Chat live with an agent!
• 309-278-5303

Love your new VIVO setup and want to share?
Tag us in your photo! vivo_us

Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

• 309-278-5303 AVG.
  RESOLUTION TIME (within office hrs): 5M 4S

• www.vivo-us.com Chat live with an agent!
  AVG. RESOLUTION TIME (within office hrs): < 15 M

• help@vivo-us.com
  AVG. RESPONSE TIME (within office hrs): 1HR 8M

  • 23% within < 15m
  • 38% within < 30m
  • 61% within < 1hr
  • 83% within < 2hr
  • 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
LAST UPDATED: 05/16/2023
REV1.1L

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• Single Monitor and Laptop Desk Mount – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>