VIVO MOUNT-ALL02 Wall Mount Designed for Nintendo Switch Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
VIVO MOUNT-ALL02 Wall Mount Designed for Nintendo Switch
Product Information
This wall mount is designed specifically for the Nintendo Switch. It allows you to securely mount your Nintendo Switch to the wall, keeping it safe and organized.
Product Usage Instructions
WARNING! CHOKING HAZARD – SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Assembly Steps
STEP 1 – Wood Stud Installation
- Hold Mount (A) up to the desired location and mark the mounting holes using a pencil. Use a level and stud finder to ensure accurate placement.
- Drill marked locations 0.75″ (19mm) deep using a 1/8″ (3mm) drill bit.
- Install Mount (A) to the wall using ST4.2x25mm Screws (W-A) and a Phillips screwdriver.
STEP 1 – Concrete Wall Installation
- Hold Mount (A) up to the desired location and mark the mounting holes using a pencil. Use a level and stud finder to ensure accurate placement.
- Drill marked locations 1.2″ (30mm) deep using a 15/64″ (6mm) drill bit.
- Press Concrete Anchors (W-B) into the drilled holes.
- Install Mount (A) to the wall using ST4.2x25mm Screws (W-A) and a Phillips screwdriver.
STEP 2 – Mounting the Nintendo Switch
- Place your Nintendo Switch device in Mount (A) and adjust the bracket depth by loosening the underside Wing Nuts (A1) and sliding the bracket towards the device.
- Tighten Wing Nuts (A1) once the device is snug.
- Wrap the Elastic Band (B) around your device and secure it around the tabs on either side of Mount (A).
Contact Information
For any inquiries or assistance, please contact:
- Phone: 309-278-5303
- Email: [email protected]
- Website: https://vivo-us.com/products/mount-all02
- Live Chat: Chat live with anagent!.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1 – Wood Stud Installation
Hold Mount (A) up to desired location and mark mounting holes using a pencil.
Use of a level and stud finder is highly recommended. Drill marked locations
0.75” (19mm) deep using a 1/8” (3mm) drill bit. Install Mount (A) to wall
using ST4.2x25mm Screws (W-A) and a Phillips screwdriver.
STEP 1 – Concrete Wall Installation
Hold Mount (A) up to desired location and marking mounting holes using a
pencil. Use of a level and stud finder is highly recommended. Drill marked
locations 1.2” (30mm) deep using a 15/64” (6mm) drill bit. Press Concrete
Anchors (W-B) into the drilled holes. Install Mount (A) to wall using
ST4.2x25mmScrews (W-A) and a Phillips screw driver.
STEP 2 Place your device in Mount (A) and adjust the bracket depth by loosening underside Wing Nuts (A1) and sliding the bracket towards the device. Tighten Wing Nuts (A1)once the device is snug.
Wrap Elastic Band (B) around your device and secure around the tabs on either side of Mount (A).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_usOpen Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com. Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
- [email protected]. AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com. Wall Mount Designed for Nintendo Switch Instruction Manual
SKU: MOUNT-ALL02 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. <https ://vivo-us.com/products/mount-all02>
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- [email protected]
- www.vivo-us.com.
- 309-278-5303
- Chat live with an agent!
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Wall Mount Designed for Nintendo Switch – VIVO - desk solutions, screen mounting, and more