WARING CB15T Ultra Heavy Duty Blender Instruction Manual
- June 13, 2024
- WARING
Table of Contents
WARING CB15T Ultra Heavy Duty Blender
Product Information
The product is an ultra-heavy-duty blender designed for commercial use. It is available in different models including CB15T, CB15TS, and CB15 with Hot Blending Lid. The blender featuresa slow start blending mechanism and a timer that can be adjusted from 10 seconds to 3 minutes. It comes with a 3-year limited motor warranty and is NSF certified. The blender also includes an electronic membrane keypad for easy operation.
Product Usage Instructions
- Before using the blender, ensure that it is properly assembled and all parts are securely attached.
- Connect the blender to a power source using the provided power cord.
- To turn on the blender, press the POWER ON/OFF button.
- To start blending, select the desired blending speed using the LLOOW, MED, or HIGH buttons.
- If pulsing is required, press the PULSE button.
- To stop blending, press the STOP button.
- For hot blending, attach the optional Hot Blending Lid (CBL10) to the blender.
- Ensure that the blending container is securely placed on the base unit before operating the blender.
- To adjust the blending time, use the timer adjustment buttons on the electronic membrane keypad.
- After each blending cycle, allow the blender to rest for 1 minute before starting another cycle.
Note: For detailed instructions on assembling and disassembling specific parts of the blender, refer to the user manual provided with the product.
Unit Information
- 15.0 Amps. – 3.75 HP
- 3 Year Limited Motor Warranty
- Electronic Membrane Keypad
- Slow Start™ Blending Mechanism
- Timer Adjustable from 10 seconds to 3 minutes
- Operating Cycle is 3 Min. ON and 1 Min. OFF
PART LIST
Illustration#| Part#| Description|
---|---|---|---
1| 024000| Hot Blending Outer Polycarbonate Lid
2| 026496| Gasket
3| 023998| Hot Blending Lid Baffle Cup
4| 002972| Cap Nut
5| 027581| Washer
6| 027683| Blade
7| 018389| “O” Ring
8| 027582| Bearing Cap
9| 018390| Small “V” Ring
10| 023934| Bearing Holder
11| 004946| Washer
12| 018386| Bearing
13| 023926| Spacer
14| 023907| Spring Washer
15| 023927| Retaining Ring
16| 023906| Large “V” Ring
17| 023933| Drive Shaft
18| 025817| Key (changed after 6/18/2004)
19| 028530| Cover Insert (changed after 10/9/2006)
20| 028226| Vinyl Outer Lid (changed after 10/9/2006)
21| 013470| Stopper (on units before 10/9/2006)
22| 013469| Stainless Steel Outer Lid
| 023999| Plastic Outer Lid (obsolete)
23| 017442| Stainless Steel Lid Gasket
| 026496| Plastic Lid Gasket (units before 10/9/2006)
24| 008791| Latch Wire (3 required)
25| 502773| Bracket Assembly (spot welded to container| 3 required)
26| 023909| Double Handle Container|
27| 502977| Blending Assembly (complete)|
28| 004949| Container Base Gasket|
29| 025571| Container Support (changed after 8/12/2002)|
30| 012008| Lock Nut|
31| 503328| Coupling with Magnet Ring (on units after 9/16/2013)
| 502696| Coupling
Illustration#| Part#| Description
---|---|---
32| 025871| Jar Pad
33| 028025| Top Housing (changed after 10/26/2010)
34| 030895| Control Panel ( on units after 9/16/2013)
| 028052| Control Module Panel
35| 029888| Rear Control Panel ( on units after 9/16/2013)
36| 026497| Screw (4 required)
37| 030453| Control Panel Baffle ( on units after 9/16/2013)
38| 002984| Washer (4 required on units after 8/25/2016 )
| 003344| Washer ( 4 required on units after 3/28/2016)
| 002984| Washer (4 required on units after 3/12/2003 )
(8 required for use with 015434)
39| 016691| Hex Bolt (4 required on units after 8/25/2016 )
| 019098| Screw (4 required on units after 3/28/2016 )
| 016691| Screw (4 required on units after 3/12/2003 )
| 015434| Screw (4 required holds mounting plate to motor)
| | (4 required holds motor to top housing)
40| 035520| Leili Motor (on units after 11/1/2017)
| 029875| ECM Motor with MTP (on units after 8/25/2016)
| 503472| Grosohopp Motor Modified (on units after 3/28/2016 use 036445)
| 029875| ECM Motor with MTP (on units after 9/26/2013)
| 503323| Motor with Sensor ( on units after 8/27/2013)
| 026170| ECM Motor (on units after 3/5/2003)
| 018788| Motor (no longer available)
41| 026318| Baffle (on units after 8/25/2016)
| 035355| Baffle (on units after 3/28/2016)
| 026318| Baffle
42| 026500| Screw (6 required)
43| 018791| Screen
44| 013731| Cable Tie (1 required on units after 9/16/2013 ) – (5 required)
45| 503329| Cord Set (on units after 9/16/2013)
| 502855| Cord Set (on units after 3/5/2003)
| 501956| Cord Set
46| 018811| Strain Relief
47| 002943| Ground Washer (on units after 8/18/2009)
| 014798| Washer
48| 027278| Ground Screw (on units after 8/18/2009)
| 016317| Screw
49| 026317| Bottom Housing
50| 002984| Washer (4 required)
51| 026412| Screw (4 required)
Illustration#| Part#| Description
---|---|---
52| 026296| Foot (4 required)
53| 018314| Washer (4 required)
54| 026493| Screw (4 required)
ACCESSORIES
ABOUT COMPANY
- 314 Ella T. Grasso Ave.
- Torrington, CT 06790
- Tele. 1-800-269-6640
- Fax 860-496-9017
- www.waringcommercialproducts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>