Welland RS2360B Smart Skipping Rope User Manual

Welland RS2360B Smart Skipping Rope

Product Information

• Product Name: Smart Jump Rope
• Product Dimensions: 27x180mm
• Rope Size: 3000mm
• Weight: 0.20 kg
• Display Size: 28 x 16 mm
• Battery Type: 2 x 1.5V AAA

Product Usage Instructions

1. Long press the upper button for 2 seconds to turn on the device. The default mode is Free Jumping mode.
2. Free Jumping Mode: Jump without time or repetition limit.
3. Time Countdown Mode: Jump with a time limit. You can choose from 30 seconds, 1 minute, 5 minutes, 10 minutes, and customized time on the Skipjoy App. Without the app, the device will record the last selected period of time.
4. Jump Countdown Mode: Set a limit of the number of jumps. You can choose from 50, 100, 500, 1000, and customized number of jumps on the Skipjoy App. Without the App, the device will record the last selected number of jumps.
5. Consumed Calories Mode: When the jumping stops above 1.3 seconds, it will display the number of jumps and the jumping time. At the same time, short press the button to switch the screen, and the display will show the consumed calorie data.

The display in different modes can also be switched using the Skipjoy App. No mode can be switched during jumping. To install the other jump handle, follow the same instructions as shown above.

Additional Information

• The product should not be used near a receiving antenna to avoid interference.
• Increase the separation between the product and receiver to improve reception.
• Connect the product to an outlet on a different circuit than the receiver if necessary.
• Consult the dealer or an experienced radio/TV technician for assistance if needed.
• Changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.

Country of Origin: Made in China

Please read the instructions carefully before using the jump rope.

Product Specification

• Product Size: 27×180mm / Rope size: 3000mm
• Product Weight: 0.20 kg
• LCD Display: 28 × 16 mm
• Power: 2 x 1.5V AAA
• Max. Jumps: 9999 times
• Max. Time: 99 Mins 59 Seconds
• Min. Jump: 1 time
• Min. Time: 1 second
• Auto off Time: 60 seconds

Product Feature

1. LCD display
2. Function buttons
3. Buzzer hole
4. Battery compartment
5. PVC steel rope
6. Rope accessories

Product LCD Display

1. BT icon indicates connected.
2. Free Jumping mode: jump without time or repetition limit.
3. Time countdown mode: jump with a time limit. You can choose from 30 seconds, 1 minute, 5 minutes, 10 minutes, and customized time on the Skipjoy App. Without the app, the device will record the last selected period of time.
4. Jump countdown mode: set a limit of the number of jumps. You can choose from 50, 100, 500, 1000, and customized number of jumps on the Skipjoy App. Without the App, the device will record the last selected number of jumps.
5. Number of jumps
6. Jumping time
7. Calorie data

Display in Different Modes

Free Jumping Mode

• Long press the upper button for 2S to turn on the device.
• The default mode is Free jumping mode.

Time Countdown Mode

• Short press the upper button to switch to Time countdown mode.
• Short press the button to adjust the countdown time.

Jump Countdown Mode

• Short press the upper button to switch Jump countdown mode.
• Short press the button to adjust the countdown number of jumps.

The display in different modes can be also switched by Skipjoy App. No mode can be switched during the jumping.

Consumed Calories Mode

• When the Jumping stops above 1.3 seconds, it will display the number of jumping and the jumping time. At the same time, short press the button to switch the screen, the display will show out the consumed calorie data.

Installation of the Jump Rope

The jump handle and the rope are packed separately in the box, please follow the below steps to install the rope and adjust the length accordingly.

Important Note: To avoid inaccurate, please make sure the longer rope is installed in the inside part of the handle.

• The installation of the other jump handle is the same as above showing.
• Please adjust the length of the jump rope to suit your height.

Battery Installation

Note: Please pay attention to the correct installation direction of the battery positive and negative electrodes, otherwise the product cannot be used normally.

Operation

1. Before starting using the jump rope, please download the App: Skipjoy from App store or Google play. Or you can scan below QR code to download the App.
2. When you install the App, please accept the permission requirement on Bluetooth, GPS & Location if your phone is operated under Android system;

Note

It is required by Google that all the smart phones operated with Android Ver. 6.0 or above must ask for the permission of location if any BLE device could be scanned and linked through Bluetooth. Any private information would not be collected by the App. You can also refer to the official document of Google for more information: https://source.android.com/devices/bluetooth/ble

1. Open Skipjoy App, fill in your personal info, and start the App.
2. Skipjoy will automatically pair the jump rope, you can check the main interface on the App to check the status of connection.
   • “Connected” shown on the main interface means successful pairing.
   • “Disconnected” shown on the main interface means unsuccessful pairing. In this condition, please press “Mine” -> “Device” -›”+” to add the device manually.
3. Click the mode you need on the main interface on the App to start your jumping;

Jump Modes

Free Jumping / Time countdown Jumping / Numbers countdown Jumping

1. Keep pressing the button for about 3 seconds to shift the mode you need.
2. You can also choose the mode from App.

Free Jumping:

• Jump the rope freely and there is no limit on time and number of jumps.

Time countdown Jumping:

• set the total jumping time.
• options for time can be set on App: 30 sec, 1 min, 5 min, 10 min, and customized time;
• Without the App, the rope will use the last countdown setting of time from the App.

Numbers countdown Jumping

• set the total jumps;
• options for number of jumps can be set on App: 50, 100, 500, 1000 and customized number of jumps

Offline storage function

• Without the running of App, the data of your jumping will be recorded temporarily by the rope and synchronized with the App after re-connection.

Reset the rope

• Press the button on the back of the LCD display for 8 seconds, the rope will be reset.
• The LCD will show all the signals for 2 seconds and then shut down. Press the button again to enter the normal use.

Maintenance

Caution and Maintenance

• Do not put the rope in very wet or hot environment.
• Avoid hitting or dropping the rope violently, otherwise damage may occur.
• Treat the rope with care as it is an electronic instrument.
• Do not immerse the handle into water or use it while raining, because it is not waterproof and damage may occur to the built-in electronic device.
• The rope is only used for the purpose of physical exercise. Do not use it for other purposes.
• Be careful when using the rope to avoid any injuries, and children under 10 are suggested to use the rope under the watch of parents

Battery and recharge

Battery: The rope has a 2 x 1.5V AAA battery which could sustain normal use of about 25 days (calculated based on a daily use of 15 minutes, actual using time varies according to the environment and time of use). The typical stand-by time is 33 days (experimental data of the manufacturer under the temperature 25 °C and humidity 65%RH).

Recharge

• If the signal Lo shows on the screen, Please replace new AAA batteries.

Tips for Maintain

• For the better life span of the battery, do not leave the rope with no battery for a long time. It is suggested to charge the rope when the battery is low. When you do not use the rope for a long time, it is suggested to charge the rope once a month.
• Do not open the handle lest any damage would happen to the rope.
• Do not burn the handle with batteries to avoid explosion of the battery.
• The rope should not be disposed of with household waste. Please check with your local authority for battery recycling advice.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Disposal

• Dispose of the device in an environmentally friendly manner.
• Dispose of it at a recycling center for used electrical and electronic.devices.
• You can obtain more information from your local authorities.
• The packaging material is recyclablePlease dispose of it in an environmentally friendly manner and take it to a recycling center.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>