THUREN FABRICATION 2003-2013 Trackbar Drop Bracket Instruction Manual
- June 13, 2024
- THUREN FABRICATION
Table of Contents
THUREN FABRICATION 2003-2013 Trackbar Drop Bracket
Product Information
The Thuren Fabrication Track Bar Drop Bracket is a component designed for use with specific Trucks. It is compatible with the following Trucks:
- 1/2 x 1-3/4 Allen-Head Bolt
- 16mm Mopar Bolt
- Stainless Machined Cam-Nut
- 5/8 Flange Nut
- 9/16 x 3.75 Bolt
- 9/16 Nylock Nut
- 16mm Flag Nut
- 5/8 x 3 BP Bolt
- 9/16 Flat Washers
- 1/2 Small Circumference Washer
Product Usage Instructions
- Ensure that the Track Bar Drop Bracket is compatible with your Truck model.
- Gather the necessary tools and components listed above for installation.
- Locate the appropriate mounting position for the Track Bar Drop Bracket on your Truck.
- Using the provided Allen-Head Bolt, Mopar Bolt, or BP Bolt, attach the Track Bar Drop Bracket securely to the designated mounting position.
- Use the appropriate nuts (Cam-Nut, Flange Nut, Nylock Nut, or Flag Nut) to fasten the Track Bar Drop Bracket in place.
- Ensure all bolts are tightened properly using a torque wrench:
- Torque the bolts to 100 ft lbs.
- Torque the bolts to 150 ft lbs.
- Torque the bolts to 215 ft lbs.
Following these instructions will allow you to effectively install and utilize the Thuren Fabrication Track Bar Drop Bracket on your Truck.
Track bar drop bracket
These instructions are applicable to the following Trucks:
- 2003 – 2013 Ram 2500
- 2003 – 2013 Ram 3500
- 2005 – 2013 Power Wagon
Applicable Part Numbers:
(TF-TBDROP-0313RAM)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>