Thuren Fabrication 2009-2023 RAM 1500 Rear Swaybar Links Instructions
- June 13, 2024
- THUREN FABRICATION
Table of Contents
2009-2023 RAM 1500
Rear Sway bar Links
Instructions
Thorin Fabrication 2009-2023 RAM 1500 Rear Sway bar Links
These instructions are applicable to the following Trucks:
•2009-2022 Ram 1500 with rear coil spring suspension Applicable part number:
TF-SBLKIT-130
Tools Required:
Standard Socket / Wrench tool kit
Drill with 1/2” drill bit (as necessary)
Pre-assembly
- Park on level ground
- No need to remove the wheels or jack your truck up
- Remove both OEM Sway Bar Links.
– The tip of the bolt head has a allen socket to assist with removal. (image
warning
Test fit the supplied 1/2” bolts in the frame and Sway Bar mount holes. Each bolt should effertlessly slide through mount hole. If it’s a tight fit, use your drill and 1/2” drill bit to clean up the holes and open them up.
Installation
-
Mount Sway Bar Links on outside of Frame and Sway Bar with the Zerk fittings facing forward and pointed upward.
-
Install the Stainless Steel Crush Sleeve with the flat face against the frame and against the Sway Bar.
-
Bolts should be installed with bolt head on the outside against Center Ball.
-
Final torque on all hardware is 110 Ft/Lbs.
-
Grease all four Zerks with high quality synthetic grease and enjoy the ride!
https://www.thurenfabrication.com/pages/qr-code-for-our-store?r=XV3GLYCBZJ8U
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>