Thuren Fabrication 2014-2023 Parking Brake Bracket Instructions

Thuren Fabrication 2014-2023 Parking Brake Bracket

Product Information

The Thuren Fabrication Parking Brake Bracket is a component designed for specific trucks. It comes in two variants: Large Parking Brake Bracket and Small Parking Brake Bracket. Image 1 showcases the Large Parking Brake Bracket, while Image 2 displays the Small Parking Brake Bracket.

Product Usage Instructions

1. Identify the type of parking brake bracket required for your truck by referring to the images provided.
2. Once you have determined the correct bracket, ensure that you have all the necessary tools and equipment to install it.
3. Locate the existing parking brake bracket on your truck and remove it carefully.
4. Take the new Thuren Fabrication Parking Brake Bracket that matches your truck’s requirements.
5. Align the holes on the new bracket with the corresponding holes on your truck’s frame.
6. Securely attach the new bracket using appropriate hardware, ensuring a tight fit.
7. Double-check all connections and tighten any loose bolts or screws.
8. Test the parking brake functionality to ensure it engages and disengages properly.
9. If everything is functioning correctly, reassemble any parts that were removed during the installation process.
10. Refer to your truck’s user manual for any additional steps or precautions specific to your model.

Note : It is recommended to consult a professional or refer to an authorized service center if you are unsure about the installation process or encounter any difficulties during installation.

SAFETY GUIDANCE

Thuren Fabrication parking Brake bracket

These instructions are applicable to the following Trucks:

• 2014-2018 2500/Power Wagon (Large Bracket)
• 2014-2023 2500/Power Wagon (Small Bracket)

Available Part Numbers:

• (TF-EBCBLRG-14U) Large Parking Brake Cable Bracket (image 1)
• (TF-EBCBSMALL-14U) Small Parking Brake Cable Bracket (image 2)

INSTRUCTIONS

Large Parking Brake Bracket (image 1)

• Remove parking brake cable bracket from drivers side rear frame rail. Retain OEM Hardware.
• Install Large Thuren Parking Brake Bracket, match cut radius on top of bracket to cross member protruding from frame.
• If you are installing Piggy-Back Remote Reservior Shocks there will be a Small Parking Brake Bracket included that will attach to the lower passenger side rear control arm as pictured to hold the brake cable off of the shock body.
• Remove the hold down on the axle and re-use the bolt for the new bracket.

Small Parking Brake Bracket (image 2)

• Remove Bolt holding the wire type cable guide from the upper control arm.
• Pry open the wire loop with a flat tip screw driver or pair of channel locks and discard
• Using the OEM bolt, install the Small Thuren Parking Brake Bracket as shown (image 2)
• Holding the parking brake cable in place, use a small flat tip screw driver and pry the metal tab retainer up into place

SCAN ME:

Documents / Resources

| Thuren Fabrication 2014-2023 Parking Brake Bracket [pdf] Instructions
2014-2023 Parking Brake Bracket, 2014-2023, Parking Brake Bracket, Brake Bracket, Bracket
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>