dynamic BIOSENSORS heliX+ TS-0 v5.1 Test and Standby Solution User Manual
- August 27, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS heliX+ TS-0 v5.1 Test and Standby Solution
Specifications
- Product Name: heliX+
- Model: TS-0 v5.1
- Order Number: TS-0
- Key Features:
- 2 spots with 2 different anchor sequences for DNA-encoded addressing
- Contents:
- Adapter strand 1 – Ra – lfs
- Adapter strand 2 – Ra – lfs
- Concentration: 100 nM
- Storage: Solution is ready to use for biochip functionalization. Please see expiry date on label.
- Buffer: TE40 (10 mM Tris, 40 mM NaCl, 0.05% Tween20, 50 M EDTA, 50 M EGTA)
Product Usage Instructions
Preparation
- Ensure the product is stored properly as per the storage instructions.
- If needed, aliquot the nanolever to avoid multiple freeze-thaw cycles.
Biochip Functionalization
- Prepare the biochip according to your experimental requirements.
- Add the heliX+ solution to the biochip surface for functionalization.
- Follow standard protocols for DNA-encoded addressing using the anchor sequences provided.
FAQ
-
Q: Can heliX+ be used for clinical diagnostics?
A: No, heliX+ is for research use only. -
Q: What is the shelf life of heliX+?
A: The product has a limited shelf life. Please check the expiry date on the label. -
Q: How should I store heliX+?
A: Store the product as instructed and consider aliquoting to avoid repeated freeze-thaw cycles.
TEST AND STANDBY SOLUTION with red dye Ra
Dynamic Biosensors GmbH & Inc. TS-0 v5.1
Key Features
- Adapter strand 1 – Ra – lfs and Adapter strand 2 – Ra – lfs (ligand-free strand) for functionalization of heliX® Adapter Chip on Spot 1 and Spot 2, respectively.
- Compatible with heliX® Adapter Chip.
- Includes Adapter strands for more than 50 regenerations.
- Ideal for heliX® Adapter Chip status test and storage
- Adapter strands 1 and 2 carry a moderately hydrophilic red dye (Ra) with a single positive net charge.
Adapter Chip Overview
2 spots with 2 different anchor sequences for DNA-encoded addressing
Product Description
Order Number : TS-0
Table 1. Contents and Storage Information
- For research use only.
- This product has a limited shelf life, please see expiry date on label.
- To avoid many freeze-thaw cycles please aliquot the nanolever.
- Solution is ready to use for biochip functionalization.
Contact
Dynamic Biosensors GmbH Perchtinger Str. 8/10 81379 Munich
Germany
Dynamic Biosensors, Inc. 300 Trade Center, Suite 1400 Woburn, MA 01801 USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved
[1] TE40: 10 mM Tris, 40 mM NaCl, 0.05 % Tween20, 50 μM EDTA, 50 μM EGTA
www.dynamic-biosensors.com