horizont AN100 Type 10896 Electric Fencer Farmer Instruction Manual
- June 13, 2024
- Horizont
Table of Contents
- horizont AN100 Type 10896 Electric Fencer Farmer
- Product Information
- Product Usage Instructions
- General Safety Instructions
- Installation
- Commissioning
- Maintenance
- Disassembly, Dismantling, Storage and Transport
- Faults and Repairs
- Technical data
- Instruction
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
horizont AN100 Type 10896 Electric Fencer Farmer
Product Information
The product is an electric fencer called “farmer AN100 / AN200 / AN300” manufactured by an unspecified company. It is designed to transmit voltage pulses to a connected pasture fence for the purpose of creating an electric barrier. The fencer can be powered by either a 12V rechargeable battery or a 230V/110V mains adapter.
General Safety Instructions
- Always switch off the fencer before coming into contact with it.
- Only use optional additional parts prescribed by the manufacturer.
Description and Construction of the Product
The fencer is responsible for transmitting voltage pulses to the fence. It
is important to use the manufacturer-prescribed additional parts for proper
operation.
Earthing
Good earthing of the fence is crucial for trouble-free operation and
optimal performance. The fence should be earthed at a preferably moist and
overgrown location. If the ground is dry and the fence is long, it is
recommended to install an additional earth conductor with intermediate earths
(every 50m) along the fence.
Installation with a 12V Rechargeable Battery
- Connect the 12V rechargeable battery, ensuring clean pole terminals and correct polarity (red + / black -). The device will not start if the polarity is reversed.
- Use only rechargeable 12V batteries and charge them in well-ventilated rooms with proper ventilation.
- Disconnect the rechargeable battery from the energizer during the charging process.
- Recharge the battery before and after every use, as well as during longer periods of storage (every 2 months).
- The energizer has an AUTO-ON function, so it starts operating as soon as power is connected.
Installation with a 230V/110V Mains Adapter
Use the specified mains adapter (47PSU0010EU/UK) for the operation of 230V
power supply. Connect the mains adapter to the energizer via the mains
connection. With the mains adapter, you can easily charge a connected 12V
rechargeable battery in parallel operation. In case of a power supply failure,
the energizer will be supplied from the rechargeable battery.
Installation with 230V/110V
Simply insert the energizer’s mains plug into the power socket. The
energizer has an AUTO-ON function, so it starts operating immediately after
connection to the mains network.
Product Usage Instructions
Commissioning
Power supply units: The device starts automatically once it is connected to
the power supply. After 1 second, you will hear a rhythmic even ticking of the
pulses, indicating that the device is in operation. The energizer will
transmit pulses to the fence, and the LED display will light up. If the status
LEDs do not light up, it may indicate a defect in the power supply.
Energizer Operating Description
The rechargeable battery indicator on the energizer provides information
about the rechargeable battery or battery voltage. Use this indicator to
monitor the battery status.
Operating manual of the electric fencer
farmer AN100 / AN200 / AN300
- In association with the installation and safety instructions for the SECURA ANIMAL or SECURA SECURITY electric fencers (www.horizont.com/securaanimal or www.horizont.com/securasecurity)
General Safety Instructions
Switch off the pasture fencer before coming into contact with it!
Operating manual information
- The operating manual has some important instructions on handling the energizer. All technical details in the manual have been prepared and compiled with the greatest possible care. Even so, errors cannot be excluded. We wish to point out that we cannot assume any guarantee, legal responsibility or any liability for consequences attributable to possible lack of details. We would, at all times, welcome any notification of possible errors. Safe working depends on the indicated safety and handling instructions being adhered to. Also to be adhered to are those local accident prevention provisions which are in force where the energizer is used as well as the general safety requirements.
- The operating manual is to be studied carefully before any work begins!
- As an integral part of the overall product it is to be securely kept right next to the energizer and for ease of consultation by the personnel.
- Do hand over this manual should this product be sold or passed on to another party. For a better understanding of what is involved, some of the diagrams in this manual may not be true-to-scale and may deviate slightly from the actual construction-al design.
Description and Construction of the Product
The energizer transmits voltage pulses to a connected pasture fence.
Caution! Only the optional additional parts prescribed by the manufacturer are to be used.
Installation
Installation:
- The energizer can either be mounted on a wall or on a stable post. The earthing rod (longitudinal rod) must be driven as deeply as possible into the ground at a moist location and connected by a corrosion-resistant wire to the earthing terminal ( ) of the energizer. FIG.
- Connect the fence cable to the terminal with the lightning symbols ( ) . The energizer is only protected against moisture if it is properly installed. Shield the energizer from direct solar irradiation. Do not operate the energizer when it lies on the ground. Set the energizer up in a location where there is no fire hazard.
Fig. 2 optional:
Earthing:
- Good earthing of the fence is extremely important for trouble-free operation and optimum performance of the energizer; therefore it should be earthed at a preferably moist and overgrown location.
- If the ground is dry and the fence is long, an additional earth conductor with intermediate earths (every 50 m) should be installed along the fence.
Installation with a 12V rechargeable battery:
Connect the 12V rechargeable battery (red + / black -), ensure clean pole
terminals and correct polarity. The device will not start if the polarity is
re-versed.
CAUTION!
- Only use rechargeable 12 V batteries; only charge rechargeable batteries with ventilation in well-ventilated rooms. Disconnect the rechargeable battery from the energizer during the charging process. The rechargeable battery should be recharged before and after every use as well as during longer periods of storage (every 2 months) and disconnected from the energizer.
- The energizer has an AUTO-ON function which ensures that as soon as power is connected the energizer starts to operate.
Installation with a 230V/110V mains adapter:
- For the operation of 230V power supply only use the mains adapter 47PSU0010EU/UK, as specified on the intermediate plate in the device!
- Connect the mains adapter with the energizer, as described in Fig. 3, via the mains connection 2 . With the mains adapter it is easy to charge a connected 12 V rechargeable battery in parallel operation.
- If the 230 V/110V supply fails, the energizer is then supplied from the re-chargeable battery.
Installation and connection
For 230V operation the energizer should be and the adapter must be installed in a room protected from moisture.
Installation with 230V/110V:
Insert the energizer’s mains plug into the power socket.
CAUTION!
The energizer has an AUTO-ON function. As such, the energizer starts following
connection to the mains network.
Commissioning
Commissioning – Power supply units:
- Device starts automatically once it is connected to the power supply After 1 second, you will hear a rhythmic even ticking of the pulses; the device is in operation.
- The energizer transmits pulses to the fence and the LED display lights up. The fact of the status LEDs not lighting up points to a defect in the power supply
Energizer Operating Description
- Rechargeable battery indicator: The rechargeable battery indicator provides information about the rechargeable battery or battery voltage.
- Power economiser: A fitted power economizer matches power consumption to the state of the fence. This means less current consumption with well insulated fences and a greater current consumption with poorly insulated fences (leakages due to plant growth, etc.).
Maintenance
Table 13 (12V rechargeable battery)
- The rechargeable battery must be recharged at the latest when discharged down to 20% (only 80% charge capacity left) to prevent a flat battery. The rechargeable battery indicator (LED2)
- lights up: Do note that temperature and measurement deviation may cause these figures to vary.
Caution!
- When using a solar system
- Only carry out a battery or rechargeable battery test at start of the day ( no solar power supplied – cover panel )
Disassembly, Dismantling, Storage and Transport
Disassembly, Dismantling
- Before starting disassembly:
- Switch off energizer
- Disconnect entire energy supply from the energizer.
- Remove operating/auxiliary materials and any remaining working materials and dispose of in an environmentally-compatible manner.
Then properly clean sub-assemblies and parts and disassemble them in taking account of the local industrial safety & environmental protection provisions in force.
Storage, Transport
Ensure that the energizer is both stored and transported only when switched
off.
NOTE!
Ensure that rechargeable batteries are stored in ventilated and dry rooms.
Faults and Repairs
WARNING!
- Repairs may only be carried out by qualified persons.
- Only the spare parts prescribed by the manufacturer may be used.
Subject to technical alterations!
Table 14
Spare parts Fig. 1
Pos | AN100 | AN 200 | AN 300 |
---|---|---|---|
01 | 986592 | 986592 | 986592 |
02 | 84716 | 84716 | 84716 |
03 | 607072 | 607072 | 607072 |
04 | 83234 | 83234 | 83234 |
05 | – | 83761 | 87926 |
06 | – | 83403 | 83403 |
07 | 60720 | 60720 | 60717 |
09 | 97690 | 97690 | 97690 |
Pos | AN 100 | AN 200 | AN 300 |
--- | --- | --- | --- |
10 | 88148 | 88148 | 88148 |
11 | 84719 | 84719 | 84719 |
12 | 83237 | 83237 | 83237 |
13 | 83593 | 83593 | 83593 |
14 | 98271 | 98271 | 98271 |
15 | 97999 | 97999 | 97999 |
16 | 94581 | 94581 | 94581 |
17 | 83475 | 83475 | 83475 |
Fig. 5
Technical data
| | Joule IN| Joule OUT| max. Spannung|
Stromver- brauch| Spannung 500 Ω
---|---|---|---|---|---|---
farmer AN100| 1 x 1m| 1,3 J| 1,0 J| ~ 11.500 V| 30 – 90 mA| ~ 4.200
V
farmer AN200| 2 x 1m| 2,5 J| 2,0 J| ~ 11.200 V| 35 -190 mA| ~ 4.500
V
farmer AN300| 3 x 1m| 4,2 J| 3,0 J| ~ 11.800 V| 30 -265 mA| ~ 6.200
V
Fig. 6
CEE: max. fence line length
- farmer AN100
- Type 10896
- attestation
- APAVE 8051329-001-1 /A
- farmer AN200
- Type 10897
- attestation
- APAVE 8051329-001-1 /B
- farmer AN300
- Type 10882
- attestation
- APAVE 8051329-001-1 /C
Subject to technical alterations!
Fig. 5
- Total Weight :1,35 kg
Instruction
Website
-
Discover our website and find more products, highlights, campaigns, movies, tips and more.
-
We look forward to your visit! www.horizont.com
-
Advisor
By means of our electric fence advisor you can receive useful information about how to arrange a reliable electric fence system. -
Electric
horizont offers a comprehensive range of electric fencing material. Please don´t hesitate to ask for a catalogue or have a look at our website to download it.
horizont group gmbh Animal Care
- Homberger Weg 4-6 34497 KORBACH GERMANY
- + 49 (0) 56 31 / 5 65 – 1 00
- + 49 (0) 56 31 / 5 65 – 1 20
- agrar@horizont.com
- horizont.com
All data is made subject to sentences mistakes and literal mistakes, subject to product changes and falsity. Reprint, even in extracts and use of the pictures only with written permission by horizont group gmbh.
References
- Willkommen bei der horizont Gruppe | horizont.com
- Willkommen bei der horizont Gruppe | horizont.com
- Willkommen bei der horizont Gruppe | horizont.com
- Willkommen bei der horizont Gruppe | horizont.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>