BOSCH 30 Universal Distance Digital Laser Rangefinder Instruction Manual

: June 13, 2024
: Bosch

Table of Contents

Operating instructions
Safety Instructions
Product Description and Specifications
Display Elements
Technical data
Inserting/Changing the Battery
Operation
Switching On and Off
Selecting the Reference Level
Measuring functions
Maintenance and Service
Licenses
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**BOSCH 30 Universal Distance Digital Laser Rangefinder Instruction Manual

**

Online

Symbols

Operating instructions

Scan for more information

Safety Instructions

All instructions must be read and observed in order for the measuring tool to function safely. The safeguards integrated into the measuring tool may be compromised if the measuring tool is not used in accordance with these instructions. Never make warning signs on the measuring tool unrecognizable.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE AND INCLUDE THEM WITH THE MEASURING TOOL WHEN TRANSFERRING IT TO A THIRD PARTY.

Warning! If operating or adjustment devices other than those specified here are used or other procedures are carried out, this can lead to dangerous exposure to radiation.
The measuring tool is delivered with a laser warning sign (marked in the illustration of the measuring tool on the graphics page).
If the text of the laser warning label is not in your national language, stick the provided warning label in your national language over it before operating for the first time.

Do not direct the laser beam at persons or animals and do not stare into the direct or reflected laser beam yourself. You could blind somebody, cause accidents or damage your eyes.

If laser radiation hits your eye, you must close your eyes and immediately turn your head away from the beam.
Do not make any modifications to the laser equipment.
Have the measuring tool serviced only by a qualified specialist using only original replacement parts. This will ensure that the safety of the measuring tool is maintained.
Do not let children use the laser measuring tool unsupervised. They could unintentionally blind themselves or other persons.
Do not use the measuring tool in explosive atmospheres which contain flammable liquids, gases or dust. Sparks may be produced inside the measuring tool, which can ignite dust or fumes.

Product Description and Specifications

Intended Use

The measuring tool is intended for measuring distances, lengths, heights and clearances, and for calculating areas and volumes.

The measuring tool is suitable for indoor use.
This product is a consumer laser product in accordance with EN 50689.

Product Features
The numbering of the product features refers to the representation of the measuring tool in the images.

Reference level selection button
Minus button/navigation button
Function button
Measuring button
Display
Button for list of measured values
Plus button/navigation button
On/off button
Battery compartment cover
Locking mechanism of the battery compartment cover
Serial number
Reception lens
Laser beam output
Laser warning label
Protective bag

Display Elements

(a) Indicator for list of measured values
(b) Battery indicator
(c) Measured value lines
(d) Result line
(e) Reference level of measurement
(f) Laser switched on
(g) Measuring function display
(h) Error display “Error”

Technical data

Digital laser meas	Universal Distance	Universal Distance
Article number	3 603 F72 5..	3 603 F72 8..
Measuring rangeA)	0.05–30 m	0.05–50 m
Measuring accuracyB)	±2.0 mm	±2.0 mm
Smallest display unit	1 mm	1 mm

A) When measuring from front edge. In unfavourable conditions such as very strong lighting, a temperature greatly deviating from 20 °C or a poorly reflecting surface, the measuring range can be restricted.

B) This applies for high reflectivity of the target (e.g. wall painted white), weak background lighting and a 20 °C operating temperature. In addition a deviation of ±0.05 mm/m needs to be taken into account. In unfavourable conditions such as strong lighting, high altitudes or a poorly reflecting surface, and at a 20 °C operating temperature, the deviation can be ±4 mm. In addition, a deviation of ±0.15 mm/m must be taken into account.

C) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.

D) At an operating temperature of 20 °C

The serial number (11) on the type plate is used to clearly identify your measuring tool

Inserting/Changing the Battery

Always replace all the non-rechargeable batteries at the same time. Only use non-rechargeable batteries from the same manufacturer and which have the same capacity.

When inserting the batteries, ensure that the polarity is correct according to the illustration on the inside of the battery compartment.

Take the non-rechargeable batteries out of the measuring tool if you are not using it for a long time. The non-rechargeable batteries can corrode and self-discharge during prolonged storage.

Operation

Starting Operation

Never leave the measuring tool unattended when switched on, and ensure the measuring tool is switched off after use. Others may be dazzled by the laser beam.
Protect the measuring tool from moisture and direct sunlight.
Do not expose the measuring tool to any extreme temperatures or variations in temperature. For example, do not leave it in a car for extended periods of time. In case of large variations in temperature, allow the measuring tool to adjust to the ambient temperature before putting it into operation. The precision of the measuring tool may be compromised if exposed to extreme temperatures or variations in temperature.
Avoid substantial knocks to the measuring tool and avoid dropping it. After strong external influences on the measuring tool, you should always carry out an accuracy check (see “Accuracy Check”, page 29) before further work.

Switching On and Off

Press the button to switch on the measuring tool. You can also switch on the measuring tool by pressing the button. Upon switching on the measuring tool, the laser beam is not yet switched on.
Press and hold the button to switch off the measuring tool.

If no button on the measuring tool is pressed for approx. 5 min, the measuring tool will switch off automatically to preserve the non-rechargeable batteries.

All stored values are retained when the tool is switched off.

Measuring Process

Once switched on, the measuring tool is in the length measurement function.

Once the measuring tool has been switched on, the rear edge of the measuring tool is selected as the reference level for measurement. You can change the reference level. (see “Selecting the Reference Level”, page 28)

Apply the measuring tool to the point at which you want to start the measurement (e.g. wall).
Briefly press the button to switch on the laser.
Aim the laser point at the target.
Press the button again to start the measurement.

Once the measurement process is complete, the laser beam will switch off. For a further measurement, repeat this process.

Measured values or end results can be added or subtracted. In the continuous measurement function, the measurement begins immediately after the first press of the button.

Symbols For more information, you can access the online operating instructions at www.bosch-pt.com/manuals

The measuring tool must not be moved during a measurement (with the exception of the continuous measurement function). Therefore, place the measuring tool, as far as this is possible, against or on a firm stop or supporting surface.

The reception lens (12) and the laser beam output (13) must not be covered during the measuring process.

Selecting the Reference Level

For the measurement, you can select from various reference levels:

Symbols
The rear edge of the measuring tool (e.g. when placing against walls)

The front edge of the measuring tool (e.g. when measuring from a table edge)

Symbols
For more information, you can access the online operating instructions at www .bosch-pt.com/manuals

Measuring functions

Selecting/Changing Measuring Function
The measuring tool offers the following measuring functions:

Length measurement
Area measurement
Continuous measurement
Volume measurement

Press the button as many times as needed for the indicator for the required function to appear in the display (5).

To confirm the selection, press the button.
Measuring Functions

Symbols
For more information, you can access the online operating instructions at www .bosch-pt.com/manuals

Accuracy Check

Symbols
Regularly check the accuracy of the measuring tool. For more information, you can access the online operating instructions at www.bosch- pt.com/manuals

Error Message

The measuring tool monitors correct operation in every measurement. If a defect is detected, the display will indicate only the symbol shown opposite.

In this case, or if you are unable to rectify an error using the corrective measures above, send the measuring tool to the Bosch after-sales service via your dealer.

Maintenance and Service

Maintenance and Cleaning
Only store and transport the measuring tool in the protective bag provided.
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.

Take particular care of the reception lens (12), which must be handled with the same level of care you would give to a pair of glasses or a camera lens.

If the measuring tool needs to be repaired, send it off in the protective bag (15).

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts.

You can find explosion drawings and information on spare parts at: www.bosch- pt.com

The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.

In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:
www.bosch-pt.com/serviceaddresses

Disposal
Measuring tools, rechargeable/non-rechargeable batteries, accessories and packaging should be sorted for environmental friendly recycling.

Do not dispose of the measuring tools or battery packs/batteries with household waste.

Licenses

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of ARM nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

1 609 92A 8CZ | (31.03.2023) Bosch Power Tools