CLMBR-17002 Full Body Resistance Indoor Fitness Machine User Manual
- June 9, 2024
- CLMBR
Table of Contents
- About This Document
- Compliance Information
- Precautions
- Overview
- Feature
- Specifications
- Block Diagram
- Interface Connectors
- Package Overview
- Power On / Off
- Dimension
- Declaration of the Presence Condition of the Restricted Substances
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CLMBR-17002 Full Body Resistance Indoor Fitness Machine User Manual
About This Document
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of CLMBR, Inc.
The information in this document is subject to change without notice. CLMBR makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. CLMBR reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of CLMBR to notify any person of such revisions or changes. Windows is a registered trademark of Microsoft, Inc. Other brand or product names are trademarks of their respective holders.
Compliance Information
For FCC (USA)
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that maycause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC & IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set
forth foran uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
For IC (Canada)
CAN ICES-003(B)/NMB-003(B)
For CE (EU)
The device complies with the radio equipment Directive 2014/53/EU
Warning – To prevent the risk of fire or shock hazards, and do not expose the product to moisture.
! Warning – Please do not open or disassemble the product as this may cause electric shock.
Precautions
Please follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
Do:
- Turn off the product before cleaning.
- Use a soft cloth moistened with mild detergent to clean the product housing.
- Use only the qualified power adapter that comes with your device.
- Disconnect the power plug from AC outlet if the product is not going to beused for an extended period of time.
Don’t:
- Do not use abrasive cleaners, waxes or solvents for your cleaning.
- Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Avis d’utilisation
Overview
The CLMBR-17002 is a thinner 21.45″ touch computer that offers a unique screw less design with expandability and flexibility, making expansion and accessory installation much easier. The versatility of CLMBR-17002 is an exceptional choice for applications in all fitness sectors.
Feature
- Support MTK MT8385 processor.
- Support Wi-Fi 802.11a/b/g/n/ac & BT5.0 1T1R.
- Support 8MP FF camera.
- Support screen rotation.
- Unique screw less design for better user experience.
- Patented I/O design for better wiring management while implementation.
Specifications
System
** CPU| MTK MT8385, Quad-core Cortex-A73 up to 2.0GHz, Quad-core Arm
Cortex-A53 up to 2.0GHz
GPU| Mali-G72 MP3 up to 800MHz
APU| Dual-core APU up to 500MHz
Memory| 6GB dual channel LPDDR4
Storage| 64GB eMMC
Input Power| DC in 12V/4A
Display| Dual channel LVDS, resolution up to 1920x1080P60
Touch| ZCC 21.5-inch P-Cap touch sensor (EETI 80H84 controller), supports 10
fingers touch function.
Audio| Woofer x 1 (4Ω/5W) and Tweeter x 2 (4Ω/2W)
Camera| 8MP fixed-focus
G-sensor| Support screen rotation
---|---
Network| Wi-Fi 802.11a/b/g/n/ac, 2T2RBluetooth 5.0 (Support BLE), 1T1R
External IO Ports| 1 x USB2.0 Type-C HOST
1 x 12V DC IN
1 x Power button
2 x Volume button (+/-)
OS Version| Android 11.0 or later
Operation Temp| 0°C~40°C
Storage Temp.| -20°C to 60°C
Operation Humidity| 20~80%, Non-Condensing
Storage Humidity| 10~90%, Non-Condensing
LCD Touch Panel
Size| 21.45” TFT LCD
Brightness(non-touch screen)| Typical 350 cd/m2; min. 320 cd/m2
Brightness(P-CAP with ZCC)| Typical 212.5 cd/m2; min. 170 cd/m2
Number of Pixels| 1920 (H) × 1080 (V)/ 60Hz
Touch Type| P-CAP/ 10 points
Environment**
Certificate| CE, FCC, CB
Compliance| IP65 (Only Front Bezel)
Dimension (W x H x D)| 521.9 mm x 350.16 mm x 65 mm
Net Weight| 4.91 Kg
Gross Weight| TBD
Block Diagram
Interface Connectors
12V DC IN
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
1 | 12V | 2 | GND |
USB-C
Pin # | Signal Name | Pin # | Signal Name |
---|---|---|---|
A1 | GND | B12 | GND |
A2 | B11 | ||
A3 | B10 | ||
A4 | VBUS | B9 | VBUS |
A5 | B8 | ||
A6 | Dp1 | B7 | Dn2 |
A7 | Dn1 | B6 | Dp2 |
A8 | B5 | ||
A9 | VBUS | B4 | VBUS |
A10 | B3 | ||
A11 | B2 | ||
A12 | GND | B1 | GND |
Package Overview
-
Clmbr Connected
-
Power Cord DC
-
Power Supply
Warning!
This product is intended to be supplied by a UL Listed Power Adapter, rated
12Vdc, 4A minimum. (complied with LPS or PS2) Tma = 40 degree C minimum, and
the altitude of operation = 2000m minimum. If it needs further assistance with
purchasing the power source, please contact to CLMBR for further information
Power On / Off
Function | Description |
---|---|
Power on | Press the power button 5 sec, device will reboot |
Sleep | Press the power button to enter sleep mode, and press again to resume |
from sleep
Power off| Press the power button 2 sec and click power off, device will enter
deep sleep mode
Dimension
Front View
Side View
Rear View
Bottom View
Declaration of the Presence Condition of the Restricted Substances
Marking
Clmbr Connected
Equipment name: Clmbr Connected
CLMBR-17002
Type designation (Type): CLMBR-17002
Unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)|
Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
Plastic Parts| ○| ○| ○| ○| ○| ○
Metal Parts| -| ○| ○| ○| ○| ○
Cable component| -| ○| ○| ○| ○| ○
LCD Panel| -| ○| ○| ○| ○| ○
Touch Panel| -| ○| ○| ○| ○| ○
PCBA| -| ○| ○| ○| ○| ○
Software| ○| ○| ○| ○| ○| ○
Note 1: 〝Exceeding 0.1 wt %〞and〝exceeding 0.01 wt %〞indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.。
Note 2: 〝○〞indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3:The〝−〞indicates that the restricted substance corresponds to the exemption.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>