AquaOne CAP-10 Air Pump Instruction Manual
- June 13, 2024
- AquaOne
Table of Contents
Instruction manual
CAP-series Air pump
All instruction manuals also online at:
www.aquaristikwelt24.d
www.aquaristikwelt24.de
by Aquaristikwelt24
CAP-10 Air Pump Instruction
Thank you for purchasing an AquaOne CAP air pump. Read the user manual carefully before use to ensure you use the device properly.
Warranty
The guarantee period is 2 years, valid from the invoice date.
The wearing parts are not covered by the warranty. The damage caused by
improper use is excluded from the warranty.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
General information
With a CAP series aerator pump you can ensure that sufficient oxygen is available in your pond at all times of the day.
- robust housing made of high-quality plastic
- very quiet in operation and very energy-saving
- modern design
Features
- Special artificial rubber to keep a steady air output and pressure.
- Advanced air-compressing system, damping system and multilevel muffler which is extremely low in noise.
- The structure is reasonable and compact, it has a long service life and acquires best effect.
- Suitable for laboratory equipment, medical equipment, aquaculture, small sewage treatment equipment.
Safety instructions
- Do not connect to any voltage other than stated.
- Disconnect main electricity supply before installation or maintenance.
- Never submerge the air pump.
- Do not attempt to modify this unit in any way and only use the recommended parts for replacement.
- Please use in dry environment.
- If the unit fails, isolate completely from your aquarium and contact the supplier.
- Please disconnect the plug and stock in a cool and dry place if long time unused.
Installation
- Connect your air hose to the air pump’s outlet, position your air hose in your aquarium with air stone, then start work.
- Place the air pump above water level on a flat surface, otherwise please connect a non-return valve between air hose a few inches from the air pump, to ensure water is not siphoned back into the air pump.
Technical parameters
Model| Voltage| Power| Max- pressure| Max- output| Outlet| Cable length|
Applicable pond volume
---|---|---|---|---|---|---|---
CAP-10| 110- 120V/60Hz
220- 240V/50Hz| 4W| 0.016Mpa| 5L/min| 1| 3m|
CAP-20| 8W| 0.024Mpa| 13 L/min| 2| 3m|
CAP-30| 12W| 0.025Mpa| 18 L/min| 1→4| 3m|
CAP-50| 16W| 0.03Mpa| 30 L/min| 1→6| 5m|
CAP-60| 30W| 0.03Mpa| 50 L/min| 1→8| 5m|
CAP-100| 70W| 0.035Mpa| 100 L/min| 1→16| 2m|
CAP-120| 90W| 0.038Mpa| 120 L/min| 1→16| 2m|
Maintenance
Regularly clean your air hose and air stone (if in use) or change the sponge to ensure maximum output and prolonged lifespan.
Part List
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>