wellmia 31269 Mainburg Medium Sauna Garden House Kit Instruction Manual
- May 15, 2024
- wellmia
Table of Contents
wellmia 31269 Mainburg Medium Sauna Garden House Kit
Product Information
Specifications
- Product Code: 31269 / 31270
- Date: 15.02.2022
- Contact: [email protected]
Product Usage Instructions
Determining and Sawn Length
Before starting assembly, determine the required length and cut the pieces
accordingly.
Not Needed
If any parts are labeled as “Not needed,” set them aside as they will not
be used in the assembly process.
Using Accessories
Make sure to use the provided accessories during the assembly for proper
installation.
Temporary Fixation
Temporarily fix the components in place before finalizing the installation
for adjustments.
Inventory Check
Check the inventory of the house and compare it with the list of materials
provided to ensure all parts are accounted for before assembly.
Not included
- Length must be determined and sawn
- Not needed
- With accessories
- Fixed temporarily
- Inventory of the house
REQUIRED TOOLS
First compare the list of materials with your package contents! Please understand that complaints can be processed in the non-built status only!
Overview
Not included
Glue! Look for the same height
Dear customer, pay attention to the correct design
variant!
A Flush!
B Flush!
Roofing felt installation
Note! This description is only an example!
The number of bitumen strips to be used depends on your actual house size.
When joining rolls of roofing felt end to end, the overlap must be
approximately 10cm. The roof is not safe to walk on. The roof is designed for
a total load (snow, wind) and not for a point load. We recommend you always
support the roof from below during installation. The sealing of the roof
surfaces to adjacent components with bitumen sealant has to be effected by the
customer! If it is a saddle-roofed house, do not use roofing tiles for
roofing. In this case, a 20 cm wide strip of bitumen with an overhang should
be installed on both sides of the eaves. For houses with a tonne roof, please
install bitumen roofing under the shingles. In the case of a flat roof, the
laying of roof shingles is not possible!
Not included! Protect from moisture!
FAQ
Q: What should I do if a part is missing?
A: Contact our customer service at [email protected]
with your order details to address any missing parts before starting the
assembly process.
Q: Can I make modifications to the product during assembly?
A: It is recommended to follow the assembly instructions provided to ensure
proper installation and structural integrity of the product.