Skullcandy Method Active Wireless Earbuds User Manual

: June 15, 2024
: Skullcandy

Table of Contents

Skullcandy Method Active Wireless Earbuds User Manual
METHOD ACTIVE
[TO VIEW THE USER GUIDE INCLUDED IN THE METHOD ACTIVE PACKAGING, CLICK
WALK THROUGH
ON-BOARD CONTROLS
USER GUIDE
QUICK START
Answer / End:
SPECIFICATION:
TROUBLESHOOTING
FAQS
FCC STATEMENT
WARRANTY
DOWNLOAD
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Skullcandy Method Active Wireless Earbuds User Manual

Skullcandy Method Active Wireless Earbuds

METHOD ACTIVE

TO VIEW THE USER GUIDE INCLUDED IN THE METHOD ACTIVE PACKAGING, [CLICK

HERE](https://manuals.plus/wp-content/uploads/2023/12/Skullcandy-Method- Active-Wireless-Earbuds-User-Manual-1.pdf).

WALK THROUGH

ON-BOARD CONTROLS

USER GUIDE

QUICK START

Pairing Mode: off Mode

Pair New Device: “Method Active”

Power-On:

Power – Off:

Play/Pause:

Voume Up

Volume Down:

Track Forward:

Track Back:

Answer / End:

Activate Assistant

Tile Enabled: Download the App

Activate Tile™

Charge

SPECIFICATION:

Seaker Driver: 10mm,
Impedance: 16 Ohms. THO <3%@· KHz, BT 5.0,
Frequency Eland: 2402 – 2480 MHz,
Maxirrom Power: <9.5dElm,
Weight 23.5g.

TROUBLESHOOTING

FIRST-TIME PAIRING

PAIRING ISSUES?

ISSUE: The wireless earbuds not maintaining a paired status.

SOLUTION:

If you have previously paired to your device, simply turn your Method Active on and it will pair to the last known device.
If your Method Active does not successfully pair to your device, turn the product off. From the off state, hold the power on button for 5 seconds until you see a blue LED and hear “pairing.”
Enter your device’s Bluetooth settings and choose Method Active. The product should connect to your device.
If that is not successful, you will need to reset your Method Active. With the product in the On state, hold the Volume + and Volume – buttons simultaneously for 3 seconds until you hear two beeps.
Turn your Method Active off and then back on and it will go into pairing mode. Select Method Active in your Bluetooth settings.
If your earbuds do not pair after choosing them in your Bluetooth settings, choose to forget Method Active in your device.
Turn your Method Active off and back on. It will enter pairing mode. Choose Method Active in new devices in your Bluetooth settings.

EARBUDS NOT CHARGING?

ISSUE: Not seeing the LED light on Method Active that indicates earbuds are charging. Or, not seeing LED light on Method Active that indicates headphones are finished charging, despite charging for 1+ hours.

Wait momentarily after plugging the earbuds in, occasionally it takes a few seconds to begin charging.
Check to see if any debris is inside or otherwise blocking the charging port
Be sure to charge your earbuds on a flat surface to ensure the USB connector on the charging cord is flush and securely inserted into the charging port.
When charging the device, we recommend using a cable, charger, or outlet with a power output that does not exceed 18-Watt (5 Volts/3.6amps).

If you’ve checked everything above and are still experiencing issues, please visit our warranty page where you can file a claim to receive a replacement product. All Skullcandy products have a 1-year warranty.

PAIRING TO TILE

ACTIVATING TILE

HERE ARE MORE DETAILED ACTIVATION INSTRUCTIONS:

Download and open the Tile app on your smartphone or tablet
Tap the + on the top left corner of your screen
On the Add a Device page, choose Skullcandy and select the Tile enabled headphones
Press the button on your Tile device and listen for the tune
Hold the Tile close to your device until they connect, it should take about ten seconds
That is all! Your Skullcandy headphones are now activated with Tile!

LOCATING YOUR DEVICE WITH TILE

When searching for misplaced headphones, use the Tile app to audibly locate them. In the Tile app, tap “find” and listen for your headphones playing the Tile tune.
Detailed instructions on how to ring your headphones:
Ring your Tile from the Tile app when it is within Bluetooth range
Open up the Tile app to find your list of Tiles.
Tap the headphones you want to ring.
Tap the green “Find” button
Listen for the Tile tune!
After you’ve found your Tile, tap the blue “Done” button or press once firmly on the Tile button to make your Tile stop ringing.

FAQS

BATTERY & CHARGE

WHAT IS THE TOTAL CHARGING TIME FOR METHOD ACTIVE?

<1 Hour
- Note: This product has Rapid Charge. This means that you can charge your earbuds for 10 minutes to get 2 hours play time

CAN I CHARGE METHOD ACTIVE WITH MY PC/LAPTOP?

Almost all USB outputs will work to charge

DOES METHOD ACTIVE HAVE SOME SORT OF FAST CHARGE?

Yes, these earbuds have Rapid Charge technology. You will be able to charge your earbuds for 10 minutes to get 2 hours play time

**** CONNECTION

WHAT IS THE BLUETOOTH RANGE OF THE METHOD ACTIVE?

You may be able to listen up to 30+ feet (10 meters) away from your paired device, though your connection experience may vary based on your environment.

CAN I CONNECT METHOD ACTIVE TO A COMPUTER?

Yes as well as to a phone, tablet, MP3 player, or anything else with a Bluetooth connection.

WHICH VERSION OF BLUETOOTH DOES METHOD ACTIVE USE?

Bluetooth® version 5.0

GENERAL

CAN I USE SIRI/GOOGLE ASSISTANT/ALEXA WITH MY METHOD ACTIVE?

Yes, just double tap your on/off button.

CAN I USE METHOD ACTIVE FOR SPORTS OR WORKING OUT?

Yes! Method Active is sweat and waterproof (IPx7).

FCC STATEMENT

IC Compliance Stetemerrt:
This device oonteins licence-exempt tmnsmitt..-(s)/reoeiver(s) thHI comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operaticn is slilject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference. includi’1g interference that may cause undesired operation of the device.

WARRANTY

DOES METHOD ACTIVE HAVE A WARRANTY?

Yep, for 1 year! Please be sure to reach out to customer service before filing a claim, we can likely help you quickly troubleshoot and solve your problem .
Questions Visit: www.skullcandy.com