National Public Seating COGO Series Mobile Tablet Chair Instruction Manual
- June 1, 2024
- National Public Seating
Table of Contents
National Public Seating COGO Series Mobile Tablet Chair
MOBILE TABLET CHAIR COMPONENTS
-
Face Shell Structure B downward, and place it on a flat surface.
Put the Collar A1 vertically onto the Bottom Cover A1 .
INCLUDED HARDWARE
-
Insert Stem C1 into the assembled parts from Step 1.
-
Align the holes in the Base Plate C2 with the holes in the Mounting Plate C2 , insert and fasten a Screw D into each of the four holes of the Mounting Plate using the included Allen Wrench E .
Tighten each Screw until the head of the Screw is below the Base Plate as shown.
ADJUSTING THE TABLET FOR LEFT-HANDED USE
-
Using the Allen Wrench, remove the four 2 Screws attaching the Tablet Support mont to the underside of the Tablet.
-
Rotate the Tablet Support mount from “R” to “L” and fasten it to the underside of the Tablet using the four Screws.
Double check all Screws to be tightened securely before use. Check all Screws
periodically.
Failure to completely tighten the Screws may result in tipping and possible
injury!
Congratulations, your COGO MOBILE TABLET CHAIR is now assembled and ready to be used!
Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing & packaging of this product, mistakes are possible. If you encounter any missing parts or difficulty in assembly, please contact our customer service Toll Free at 1-800-261-4112 or [email protected] for courteous & immediate resolution to your problem.