garth MK BBQ Burner Injector Bracket Installation Guide
- June 13, 2024
- garth
Table of Contents
garth MK BBQ Burner Injector Bracket Installation Guide
Step 1: Pull out the side burner ignition wire.
Step 2: Take out the bolt from the side burner injector bracket.
Step 3: Split the side burner injector bracket and the side burner injector set.
Step 4: Take out the bolts as the picture shows on either side of the side burner shelf.
Step 5: Loosen the front fixing screws 3mm as the picture circles on either side of the side burner shelf.
Step 6: Loosen the two screws mounted on both sides of the main furnace securing the side furnaces
Step 7: Take out the screws as shown in the picture circles on the left side shelf.
Step 8: Loosen the front fixing screws 3mm as the picture circles on the left side shelf.
Step 9:
Loosen the two screws installed on the left side of the main furnace to fix
the side table。
Step 10:
Loosen the two setscrews in each side of the fixed panel bracket.
Step 11:
Take out all the knobs.
Step 12:
Remove all screws from the knob bezel.
Remove the panel for replacement