CLAS HU 0013 Rotary Pump Suitable Instruction Manual
- June 13, 2024
- CLAS
Table of Contents
CLAS HU 0013 Rotary Pump Suitable
Product Information
| Product Name | Rotary Pump |
|---|---|
| Manufacturer | CLAS Equipements |
| Website | clas.com |
| Contact Email | sav@clas.com |
| Contact Phone | +33(0)4 79 72 69 18 |
| Address | ZA de la CROUZA, 73800 CHIGNIN, FRANCE |
| Supported Liquids | Adblue, gasoline, diesel, motor oil, water, acid, alcohol, |
toluene, uric acid, etc.
Unsupported Liquids| Grease, glue, or any other liquid with high viscosity or
solid
products that could damage the pump components.
Components| A. outlet pipe, B. handle, C. Bung adapter, D. pump inlet hose,
E. support tube, F. strainer
Product Usage Instructions
** Warning:** Before returning this product for any reason
(installation problem, instructions for use, breakdown, manufacturing
problem…), please contact us. Contact: You can reach us by mail
sav@clas.com or
by phone at +33(0)4 79 72 69 18 or go directly to our website
clas.com. If you have changed your mind regarding your
purchase, please return this product before you attempt to install it.
Attention
This rotary pump is designed to be used ONLY with Adblue, but also with
gasoline, diesel, motor oil, water, acid, alcohol, toluene, uric acid, etc. DO
NOT use this pump with grease, glue, or any other liquid with high viscosity
or solid products that could damage the pump components. If you need
components or parts, please contact the reseller. In case of problems, please
contact your authorized technician.
WARNING
Before returning this product for any reason (installation problem,
instructions for use, breakdown, manufacturing problem…), please contact us.
Contact
You can reach us by mail at sav@clas.com or by phone at
+33(0)4 79 72 69 18 or go directly to our website clas.com
If you have changed your mind regarding your purchase,
please return this product before you
attempt to install it.
WARNING
This rotary pump is designed to be used ONLY with Adblue, but also with
gasoline, diesel, motor oil, water, acid, alcohol, toluene, uric acid, etc. DO
NOT use this pump with grease, glue or any other liquid with high viscosity or
solid products that could damage the pump components.
SPECIFICATIONS
The HU 0013 pump is a self-priming manual pump designed to move fluids.
- delivered with a 2″ BSP fitting
- 0.3 liter per crank revolution
- 1000mm inlet tube
- fixation Ø59mm thread 200
Composition
- outlet pipe
- handle
- Bung adapter
- pump inlet hose
- support tube
- trainer
CLAS Equipements
ZA de la CROUZA
73800 CHIGNIN
FRANCE
Tél. +33 (0)4 79 72 62 22
Fax. +33 (0)4 79 72 52 86If you need components or parts, please contact the
reseller.
In case of problems, please contact your authorized technician
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>