Moldull Acoustic MC002 Wireless Speaker User Manual

Moldull Acoustic MC002 Wireless Speaker

Product Information

• Bluetooth speaker x 1
• Type-C Charging Cable x 1
• User manual x 1
• 3.5mm Audio Cable x 1
• Lanyard x 1

Product Specifications|

• Model: MC002

• Product Dimensions: 1736870mm

• Product Weight: 437g

• Bluetooth Version: V5.3

• Speaker Power: 2*10w

• Frequency Response Range: 20Hz-20kHz

• Charging Port: Type-C

• Built-in Battery: Yes

• Battery Capacity: 4000mAh

• Play Time: Up to 12 hours (Varies by volume level and audio
  content)

• Standby Time: Up to 40 hours

• Charging Time: 3 hours

• Signal-to-Noise Ratio: 55dB(A)

• Transmission Range (unobstructed): 20m

• Built-in Antenna: Yes

• Adapter Power: 5V/2A

Features|

• Volume up/Next track
• Volume down/Previous track
• FM mode
• Power on/off
• Light mode switch
• Type-C Charging port
• 3.5mm Aux Input

Product Usage Instructions

Power On/Off

• Press and hold the power button for 4 seconds to power on the speaker. Press and hold the power button for 4 seconds to power off the speaker. If the speaker is not connected to Bluetooth, it will automatically power off after 5 minutes.

Volume Control

• To increase the volume, press the V+/Next track button. To decrease the volume, press the V-/Previous track button.

Play/Pause

• To play or pause audio, press the power button.

Skip Tracks

• To skip to the next track, press and hold the V+/Next track button for 2 seconds. To go to the previous track, press and hold the V-/Previous track button for 2 seconds.

Calling Function

• When there is an incoming call, press the power button to answer and end the call. Press and hold the power button for 2 seconds to end the call.

FM Mode

• To switch to FM mode, press the M button once (voice prompt: FM mode). Then, press the power button to search for channels. Pressing the FM button again switches back to Bluetooth mode (voice prompt: Bluetooth mode).

Light Mode Switch

• After connecting your phone, click the T button to switch between seven lighting modes.

Using a 3.5mm Audio Cable

• The speaker is equipped with a 3.5mm input port. Insert one end of the 3.5mm Audio Cable into the 3.5mm input port of the speaker, and the other end into a device (such as a smartphone, computer, laptop, tablet, etc.) that supports a 3.5mm input port.

Charging

• Insert the Type-C charging cable into the speaker to start the charging process. If the speaker is turned off during charging, the power button will light up in red. If the speaker is turned on during charging, the lights will remain normal.

Friendly Reminder

• If the speaker is not used for more than 3 months, it is recommended to charge it.
• Please use an FCC (Federal Communications Commission) approved charger.
• Please do not dismantle the speaker.
• Please do not expose the speaker to high or low temperatures.
• Please do not use the speaker during thunderstorms.
• Avoid dropping or subjecting the speaker to severe impact.
• Please keep the speaker away from a heat source during use.
• Please do not submerge the speaker in water.

Question and Answer

Why can’t these speakers pair with my phone?

• Make sure the speaker is fully charged and powered on.
• Ensure that Bluetooth on your phone is turned on.
• Check if the speaker is automatically connecting to any other devices.
• If none of the above points is an issue, turn off the speaker, delete the pairing record between your phone and the speaker, wait for one minute, and then reconnect your phone.

Packing List

Note: Please check if the Bluetooth speaker has power before use.

Product Introduction

Product specifications

seconds to power on.

Power off| Press and hold the power button for 4 seconds to power off. If not connected to Bluetooth,

it will automatically power off after 5 minutes.

Feature introduction

Bluetooth connection

Step 1 ：

• Press and hold the power button (approximately 4 seconds) to power on. The LED lights will illuminate, and you will hear a voice prompt: “Power on Bluetooth mode.” [If the speaker is not connected to your device for more than 5 minutes, it will automatically power off.]

Step 2 ：

• Open your phone’s Bluetooth settings, search for and select “MC002” to connect. After the connection is established, you will hear a voice prompt saying “Connected”.
• By default, the last paired device will automatically reconnect to the speaker after the initial successful connection.

To play music

• After successfully pairing with your phone, you can play music by using a music playback app on your phone.

Calling function

• When there is an incoming call, press the power button to answer and end the call.
• When there is an incoming call, press and hold the power button for 2 seconds to end the call.

FM mode

• Built-in FM antenna
• After connecting to the phone, press the M button once to switch to FM mode (voice prompt: “FM mode”), then press the power button to search for channels.
• Note: Pressing the FM button again switches back to Bluetooth mode  (voice prompt: “Bluetooth mode”).

Light mode switch

• After connecting your phone, click the “T” button to switch between seven lighting modes.
• Connect using a 3.5mm audio cable.
• The speaker is equipped with a 3.5mm input port. Insert one end of the 3.5mm Audio Cable into the 3.5mm input port of the speaker, and the other end into a device (such as a smartphone, computer, laptop, tablet, etc.) that supports a 3.5mm input port.

Charging

• Insert the Type-C charging cable, and the speaker will enter charging mode. If the speaker is turned off during the charging process, the power button will light up in red. If the speaker is turned on during the charging process, the lights will remain normal.

Friendly reminder

• If the speaker is not used for more than 3 months, we recommend charging it.
• Please use an FCC (Federal Communications Commission) approved charger.
• Please do not dismantle the speaker.
• Please do not expose the speaker to high or low temperatures.
• Please do not use the speaker during thunderstorms.
• Avoid dropping or subjecting the speaker to severe impact.
• Please keep the speaker away from a heat source during use.
• Please do not submerge the speaker in water.

Question and Answer

Frequently Asked Questions Why can’t these speakers pair with my phone?

• Please make sure the speaker is fully charged and powered on.
• Please make sure that the Bluetooth on your phone is turned on.
• Please check if the speaker is automatically connecting to any other devices.
• If none of the above points is an issue, please turn off the speaker, and delete the pairing record between your phone and the speaker. Wait for one minute and then reconnect your phone.

Why is the music cutting in and out?

• First, please ensure that the distance between these speakers and your phone does not exceed 15 meters (unobstructed).
• If the distance is less than 15 meters, please turn off the speaker, and delete the connection records between your phone and the speaker. Wait for a minute, and then reconnect your phone.

Why can’t I find any channels with the FM function?

• Please make sure that the speaker has not been impacted or fallen from a height, which could damage the built-in antenna.
• Please make sure there is no signal interference around you. You can go to an open area.
• You can try inserting a 3.5mm audio cable into the speaker’s jack and use it as an external antenna to see if it works.
• Please confirm if your FM function is properly enabled.
• The FM function is subject to regional limitations and may not receive signals in certain areas.

Are these speakers sweatproof and waterproof?

• These speakers are sweatproof and have slight water resistance. However, for electronic products, we do not recommend immersing them in water.
• For more detailed product FAQs, please contact our customer service.

Activation and Warranty

We provide a 30-day unconditional return and exchange service, as well as a 24-hour after-sales service within 180 days. Please activate within 15 days by contacting us at Prscfumstore@hotmail.com.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>