IWECOLOR Laser Engraver 50W 400x400mm Blue Laser Engraving Machine User Manual

IWECOLOR Laser Engraver 50W 400x400mm Blue Laser Engraving Machine

Product Information

Specifications

• Model: 5W High Performance 400x400mm Blue Laser Engraving Machine
• Laser Module: 5W diode laser
• Engraving Accuracy: 0.06mm ultra-fine laser focus
• Material Compatibility: Wood (up to 8mm), Acrylic (up to 5mm), Ceramics, Stainless Steel
• Supported File Formats: JPG, PNG, DXF, TIF, BMP, PDF, NC, SVG, AI
• Operating Systems: Windows, Apple (LightBurn)
• Safety: Goggles recommended but not required for viewing

Product Usage Instructions

Quick Installation Guide

• Step 1: Attach Linear Guide Rail to Front Frame
  Use 3mm Allen key and M5*10 screws to attach the linear guide rail to the front frame. Remember to tighten all screws after placing them.

• Step 2: Install Laser Module and Secure Timing Belt
  After installing the laser module, adjust and secure the timing belt using T-nuts and M5*6 screws. Ensure T-nuts are placed correctly and tightened with screws.

• Step 3: Attach Linear Guide Rail to Back Frame
  Use M5*10 screws to attach the linear guide rail to the back frame. Tighten all screws after placing them in position.

Frequently Asked Questions (FAQ)

• What materials can be engraved or cut with this machine?
  The machine can cut wood up to 8mm thick, acrylic up to 5mm, ceramics, stainless steel, and more.

• What operating systems are supported for software installation?
  The machine supports Windows system and Apple system (LightBurn).

• Do I need to wear goggles when using the laser engraving machine?
  While it is recommended to wear goggles when watching the engraving process, you can view the laser engraving without goggles. However, it is advised to take precautions.

Security Statement

Before using this laser engraving machine, it is essential to carefully read and understand the following safety statements.

• Eye Protection : Laser engraving machines use Class 4 laser technology, and direct exposure to the laser beam may cause damage to the eyes. During operation, please ensure to wear the provided protective goggles to prevent laser radiation.
• Ventilation Requirements: When using a laser engraving machine, ensure that the operating environment is well-ventilated. Laser processing may generate harmful gases and odors, so avoid operating in enclosed spaces to reduce the accumulation of harmful gases and smoke particles.
• Equipment Maintenance: Regularly inspect the operational condition of the equipment to ensure that all components are functioning properly. In the event of any abnormalities, cease operation immediately and contact customer support for assistance.
• -Startup Inspection: Before each use, conduct a comprehensive check of the equipment to ensure all components are functioning properly, especially the status of the laser.
• Equipment Placement: Position the laser engraving machine on a stable surface and ensure that there are no obstructions around it to prevent instability or interference during operation.
• Child and Pet Safety : Please place the laser engraving machine in a location that is inaccessible to children and pets to prevent potential harm.
• Laser Engraving Materials: Only use materials suitable for laser engraving machines, and check their applicability and safety before operation.
• Keep Away from Flammable Materials: Avoid directly exposing the laser beam to flammable materials during laser processing to reduce the risk of fire.
• Avoid Reflective Surfaces: Prevent direct exposure of the laser beam to surfaces that may produce reflections to minimize the risk of reflected light posing a danger to people and equipment.
• Fatigue and Alertness: Avoid operating the laser engraving machine when fatigued or in a mentally impaired state to reduce the risk of errors due to lapses in attention.
• Fire Safety Equipment: Equip the vicinity of the operating area with appropriate fire safety equipment to address potential fire hazards.
• Temperature Control: Avoid operating the laser engraving machine under extreme temperature conditions to ensure its performance and safety.
• Avoid Solo Operation: Whenever possible, avoid operating the laser engraving machine alone, especially for teenagers, to ensure that timely assistance is available when needed.
• Material Compatibility: Before laser engraving, ensure that the materials used are compatible with the equipment to prevent the generation of harmful substances.
• Dust Prevention Measures: Regularly clean the interior and exterior of the laser engraving machine to prevent dust from affecting equipment performance.
• Laser Power Settings: Exercise caution when setting the laser power based on different materials and project requirements to avoid damaging the materials or equipment. For initial use, it is advisable to conduct power tests to determine the most suitable settings for your needs.

Product Highlights

• New Upgraded Compressed Spot Laser Shaping Technology: This product adopts the latest 5W laser beam shaping technology diode laser, with 0.06mm ultra-fine laser focus ,with super cutting penetration and precision, engraving & cutting speed is faster than ordinary compressed spot Increased by 60%, it can cut 8mm thick wood, 5mm acrylic, carved ceramics and stainless steel, etc., which can meet your carving and cutting needs to the greatest extent.
• Sturdy Structural Design: The all-metal structural design makes the machine extremely sturdy, which improves the engraving accuracy, and the structural frame is very durable and remains open for upgrades. During use, users can keep the frame and replace it with other new lasers, or replace the longer Y-axis profile to expand the engraving area.
• New Eye Protection Design: The laser filter cover can filter 98% of ultraviolet rays entering the eyes. Users can watch the laser engraving without wearing goggles (it is recommended to wear goggles when watching), and at the same time, animals can be prevented from catching the laser spot.
• Wide Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, PWM engraving makes the pattern more layered,supports Windows system, Apple system (LightBurn), engraving file format supports JPG, PNG, DXF, TIF ,BMP,PDF,NC,SVG,AI, etc.
• Product Purpose: Personalized engraving, handicraft production, custom decoration, and more.

Packaging List

10

|

Tool Box

| Fixed coke| 2mm| 1| PCS|
Metal sheet| 86540.21mm| 2| PCS|
Basswood| 130653.0mm| 2| PCS|
Packing bags| 1015cm| 2| PCS|
Black tie| 3100mm| 4| PCS|
Brush|  | 1| PCS|
Wrench| 8-10851.5mm| 1| PCS|
M2 Wrench| L,2mm| 1| PCS|
M3 Wrench| L,3mm| 1| PCS|
Fishbone bag| 610cm| 1| PCS|
M5 T-nuts| 10151.5mm| 3| PCS|
M56 screws| M56，Level 12.9| 3| PCS|
M510 screws| M5*10，Level 12.9| 5| PCS|

Quick Installation Guide

• Step 1 Attach the linear guide rail to the front frame using screws.
  • Locate the fitting shown and place it in the location shown, noting the orientation of the number marks and tick marks on the linear guide.
  • Tighten the M510 screws, and pay attention to the two linear guides not to install them backwards.
    Tip:
    Put the screws in first, but don’t tighten them, and tighten them all after they are all in place.
    Required tools:
    3mm Allen key and M510 screws.

• Step 2 After installing the laser module, adjust and secure the timing belt.
  After pushing the laser module into the linear guide rail in the indicated direction, the timing belt passes through the synchronous wheel; Adjust the position of the timing belt appropriately to avoid friction between the timing belt and the timing wheel; Use T-nuts to lock the timing belt with M5*6 screws.
  Tip:
  T-nut fixing method: first put the T-nut into the groove and rotate and fix, and then lock the T-nut with screws; The T-nut is as close to the end as possible.

• Step 3 Attach the linear guide rail to the back frame using screws.
  • Locate the back frame shown and place it in the position shown, noting the rear frame orientation.
  • Tighten the M510 screws.
    Tip:
    Put the screws in first, but don’t tighten them, and tighten them all after they are all in place.
    Required tools:
    3mm Allen key and M510 screws.

Software Installation and Connection

• This product supports the most popular LaserGRBL software at present. It is open source software, easy to use and powerful. Unfortunately, LaserGRBL software only supports Windows system (Win XP/Win 7/Win 8/Win 10,etc.). Of course, for Mac users, you can choose LightBurn, LightBurn is also a very good engraving machine software, but this software is charged, and the software also supports Windows system.
• This product performs engraving or cutting by receiving instructions from a computer. During the working process, the engraving machine must maintain a data connection with the computer, and the software (LaserGRBL or LightBurn) cannot be closed.

Installing and Connecting LaserGRBL

1. LaserGRBL is one of the most popular DIY laser engraving software in the world, we can download it from LaserGRBL official website: https://lasergrbl.com/download/
2. Double-click the software installation package to start the software installation, then click Next until the installation is complete.

Add a custom button

• LaserGRBL software helps users to add custom buttons, and you can add custom buttons in the software according to your own usage habits. LaserGRBL’s official custom button is recommended here. Custom button download address:https://lasergrbl.com/usage/custom-buttons/
• Next, we load the custom button into the LaserGRBL software. In the LaserGRBL software, right-click the empty space next to the button at the bottom -> Import Custom Button, then select the custom button compression package you just downloaded, press (Y ) until there is no more pop-up window to complete the custom button installation.

Connect with device

1. Connect the device via USB to a computer with LaserGRBL software installed.
2. Plug in the power cord and press the power switch to power on the device.
3. Select the correct COM port and baud rate in software–115200.
4. In the Settings, the Firmware type is changed to Grbl and click Save.
5. Click on the “Lightning”connection symbol in the software.When the “lightning bolt”sign turns into a red “X” sign,it means the connection is successful.

Engraving/Cutting Data Reference
In order to provide users with a better experience, we have prepared several sets of engraving/cutting data for reference,FIY. ps: select 20 lines/mm for quality!

Material| Conversion Tool| Laser Mode| S-MAX| Speed(mm/min)| Perform multiple passes
---|---|---|---|---|---
Basswood| Line to Line Tracking| M4| 450| 6000| 1
MDF| Line to Line Tracking| M4| 450| 6000| 1
Stainless steel| Line to Line Tracking| M4| 1000| 800| 1
3mm Basswood| Vectorization| M3| 900| 300| 1
3mm Black Acrylic| Vectorization| M3| 900| 200| 1
5mm Basswood| Vectorization| M3| 900| 200| 3
3mm Hardwood| Vectorization| M3| 900| 300| 3

Installing and Connecting LightBurn

1. We can download the installation package from LightBurn official website: https://lightburnsoftware.com/pages/download-trial
2. Double click the installer package to install (ps: LightBurn is paid software, for better experience, it is recommended to purchase the genuine version, here we will demonstrate the installation of the trial version ), click “Install” in the pop-up window.
3. Click Start your free trial, installation is complete.

Connect with device

• How to connect this device to computer in LightBurn software?
• Click Create Manually -> scroll down to GRBL -> Serial/USB -> name it GRBL(you can customise it here) X and Y axis is 400mm x 400mm -> set the origin on the front left -> Done.
• And select the correct COM port.

Engraving/Cutting Data Reference

Material

| Engraving parameters| Cutting parameters
---|---|---
Speed| Power| Speed| Power| Size(mm)
Basswood| 100%| 45%| 5%| 90%| <=8
Corrugated paper| 100%| 20%| 10%| 90%| <=5
Cardboard| 100%| 30%| 5%| 90%| <=4
Kraft paper| 100%| 20%| 40%| 100%| <=1
Paper| 100%| 30%| 45%| 100%| <=1
Hardwood| 100%| 45%| 5%| 90%| <=5
Bamboo| 100%| 45%| 5%| 90%| <=3
Felts| 100%| 25%| 10%| 100&| <=3
Leather| 100%| 35%| 10%| 100%| <=5
Plastics| 100%| 25%| 10%| 100%| <=3
Non-transparent acrylic| 100%| 35%| 5%| 90%| <=5
Fabric| 100%| 20%| 10%| 100%| <=2
Ceramics| 50%| 60%| X
Gooselite| 50%| 60%| X
Marble (colored)| 50%| 60%| X
Shale| 50%| 60%| X
Brick| 50%| 60%| X
Stainless steel| 50%| 60%| X
Painted metal| 50%| 60%| X
Electroplated metal| 50%| 60%| X

Quick Engraving/Cutting Guide

• Device Placement:
  • Place the laser engraving machine on a stable surface.
  • Ensure that the worktable surface is level to prevent material from shaking.
• Power Adapter Connection:
  • Insert the power adapter and connect it to a stable power outlet.
  • Connect the laser engraving machine to the computer using a data cable.
• Connection to the Computer:
  • Manually connect the laser engraving machine after starting the software.
  • Install drivers (If required).
• Device Startup Steps:
  • Open the design software.
  • Import design files or create a new project.
  • Configure engraving parameters, including power and speed.
  • Click the “Start” button to initiate the engraving process.

Case Demonstration

• Case 1.We use a black metal sheet with dimensions of 86540.21mm for engraving demonstration in the LaserGRBL software.

1. The following are the operating steps:

2. Click on the location indicated by the red arrow to import the pattern file for engraving or cutting.

3. The red-boxed section in the illustration is for reference only. You can choose according to your situation, then click ‘Next.’

4. Depending on the material, set the appropriate speed and parameters for maximum or minimum values. If engraving, select the laser mode as M4; if cutting, choose the laser mode as M3. According to your needs, set the appropriate working size,then, click ‘Create’.

5. Please follow the steps indicated by the blue text in the image.Then, patiently await your masterpiece!

6. Finish.

• Case 2. We use a black metal sheet with dimensions of 86540.21mm for engraving demonstration in the LightBurn software.

1. The following are the operating steps:

2. Depending on the material, set the appropriate speed and parameters for maximum values. According to your needs, set the appropriate working size,then, click ‘ok’.

3. Please follow the steps indicated by the red text in the image.

4. Finish.

Laser Fixed Focus

The effect of engraving or cutting depends largely on the focus of the laser. This product adopts fixed focus laser, and the focusing method is simple and fast. The specific focal position is about 2mm from the bottom of the laser filter cover.
The precise laser focusing steps are as follows:

1. Move the laser to the surface of the material to be engraved or cut;
2. Place the fixed coke on the surface of the engraved or cut material;
3. Release the slider knob on the side of the laser and slide freely until it touches the fixed coke;
4. Tighten the laser side guide knob;
5. Remove the fixed coke;
6. Complete focusing.

Common Problems and Solutions

• In the LaserGRBL software it shows that it cannot connect to the device, i.e. the driver has not been successfully installed.
  In the LaserGRBL software, click on “Tools” > “intallCH340 driver” to install the driver, then restart the software after installation and connect again.

• Incorrect port selection when connecting to LaserGRBL software.
  When the driver is successfully installed, the correct port number will appear, just make sure you click on the correct port number.

• The device does not connect properly when the LaserGRBL software is opened repeatedly and there are multiple open screens.
  Just close the repeatedly opened software screens.

• Heavy shadows in the lines when the machine is cutting or engraving work.
  Adjust the contact surface of the timing belt and the timing wheel so that no friction occurs between the two sides of the timing belt and the timing wheel as far as possible, and at the same time the tightness of the timing belt in each position is as consistent as possible.

• After the installation was completed, it was found that the laser assembly was oscillating back and forth.
  Use the open-end wrench inside the toolbox to properly tighten the eccentric nut of the laser assembly

References

• Download – LaserGRBL
• Custom buttons – LaserGRBL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>