2E 2Е-S616-400 Computer Case with PSU Instruction Manual

2E 2Е-S616-400 Computer Case with PSU

Product Information:

• Product Name: COMPUTER CASE
• Model: UA RU EN 2E PC CASE (S616-400)
• Form Factor: Micro ATX/ITX
• Material: SGCC 0.5 SECC
• Power Supply: 400W SFX, 80+ PFC
• Dimensions: 78 / 40099314 449155349 3,3 3,8 12

Product Usage Instructions

1. Connect the necessary components to the computer case:
   • Install the optical drive (5.25”), hard drives (3.5” and 2.5”), VGA, CPU, etc.
   • Connect the required cables, including power, reset, USB 3.0, TYPE C, HD Audio+MIC.
2. Install the motherboard and other components:
   • Place the Micro ATX/ITX motherboard inside the case.
   • Connect all necessary cables to the motherboard.
3. Install hard drives:
   • Mount the HDD (3.5”) or SSD (2.5”) according to the available slots.
   • For HDDs, use the HDD brackets provided.
   • For SSDs, use the SSD brackets provided.
4. Connect power supply:
   • Connect the power supply to the motherboard using the appropriate cables (e.g., 24-pin, 4-pin).
   • Connect SATA cables for HDDs and MOLEX cables for other peripherals.
   • Plug the power supply into an AC outlet (230V/50Hz).
5. Ensure proper airflow:
   • Arrange the cables inside the case to allow for proper airflow.
   • Avoid blocking ventilation areas.
6. Secure the case:
   • Close the case and secure it with screws.

Note: Please refer to the user manual for detailed instructions and diagrams.

Product: computer case with PSU.
Using: for placing components of personal computer system.
Model: 2Е-S616-400.

SPECIFICATION

Reset

Power supply| 400 W
Max VGA length, mm| low profile
CPU cooler height, mm| 78
Dust filter| –
Case position| horizontal / vertical
Size (WxHxL), mm| 400х99х314
Package size (WxHxL), mm| 449х155х349
Weight without package, kg| 3,3
Weight with package, kg| 3,8
County of origin| Сhina
Guarantee| 12 months

DESCRIPTION

1. GENERAL CASE PART
   • (а) place for motherboard;
   • (b) place for power supply;
   • (c) place for optical drive 5,25’’;
   • (d) place for 80mm fan.
2. REAR CASE PANEL
   • (а) place for connecting the power supply cable of the power supply;
   • (b) expansion slots for low profile VGA;
   • (c) place of exit of motherboard connectors.
3. INSTALLATION OF COMPONENTS. SLOTS: 5,25’’, 3,5’’, 2,5’’.
   • (а) place and fixing of first HDD 3.5’’ under the frame above the power supply;
   • (b) place and fixing of SSD 2.5’’ to the internal bay;
   • (c) the location of the 5.25’’ optical drive and second 3.5’’ HDD.
4. INSTALLATION OF COMPONENTS. SLOTS: 5,25’’, 3,5’’, 2,5’’.
   • (а) place and fixation of HDD 3.5’’;
   • (b) place and fixation of two 2.5’’ SSDs: simultaneously in the internal compartment and under the frame above the power supply;
   • (c) the location of the 5.25’’ optical drive and SSD 2,5’’.

BUTTONS AND PORTS

COMPLETE SET

Appearance and equipment of item can be supplemented or modified for the purpose of the improvement or for improvement of product quality.

POWER SUPPLY SPECIFICATION

SYSTEM COMPONENTS INSTALL

1. Takes down the foot Twists off the screw on the rearpanel to take down the side panel
2. Lies the case on the tabletop Twists off two screws on the 5’’25 bay.
3. Backward pulls the 5’’25 on backward to take out.
4. Install and uninstall power supply may take out of the obstruct piece on the top panel.
5. Puts slanting 5’’25 bay revolution axis position on the rack.
6. Installs the hard disk.
7. Installs CD drive.
8. Installs the motherboard.
9. Cages on the screw 5’’25 revolving to the rack, and installs VGA card.
10. Lock the foot after (assemble the side panel)

POWER SUPPLY INSTALLATION

1. Take off the front panel.
2. Remove 2pcs screw, take down power supply.
3. Pull for ward the cable.
4. Assemble the power supply on the front plate and lock by 3pcs screw.

POWER SUPPLY INSTALLATION AND CONNECTION

Before you begin installation and start using the power supply, we propose to study current manual.

Step A: Removing the power supply which was installed if necessary:

If you are building a new system, go to step B.

1. Disconnect the AC power cord from the wall outlet or UPS, as well as from the existing power supply.
2. Disconnect all cables that connect power to the graphics card, motherboard, and other peripherals.
3. Following the instructions for the system unit, remove the power supply.
4. Go to step B.

Step B: Power supply installation:

1. Make sure that the AC cable of the power supply is not connected.
2. Following the instructions of the computer case operation guide, install the power supply unit and fix it with screws from assembling kit.
3. Connect the 24-pin power cable. The general 24-pin power cable is equipped with a removable 4-pin connector, which ensures compatibility with both 24-pin and 20-pin connectors on the motherboard.
   • a. If the motherboard has a 24-pin connector, you can directly connect the 24-pin power cable from the power supply to it.
   • b. If the motherboard has a 20-pin connector, divide 4-pin cable from the 24-pin connector and then connect the 20-pin cable to the motherboard without connecting the 4-pin connector.
4. Connect 8-pin + 12V cable.
   • a. If the motherboard is equipped with an 8-pin + 12V connector, connect the cable with the 8-pin connector directly to the motherboard.
   • b. If the motherboard has a 4-pin connector, divide 4-pin cable from the 8-pin connector and then connect the 4-pin cable directly to the motherboard.
5. Connect the peripheral cables, PCI-Express and SATA cables.
   • a. Connect the peripheral cables to the power connectors of the hard drive and CD-ROM / DVD-ROM.
   • b. Connect the SATA cables to the power connectors of the SATA hard drive.
   • c. If necessary, connect the appropriate PCI-Express cables to the power connector on the PCI-Express graphics card.
   • d. Connect peripheral power cables to any peripherals with a small 4-pin connector.
   • e. Make sure all cables are securely connected.
6. Connect the AC power cable to the power supply and turn it on by turning the switch to the ON position (it is marked with an “I”).

ENVIRONMENT REQUIREMENTS

• Operating temperature: +10 ° C ~ +40 ° C.
• Storage Temperature: -40 ° C ~ +70 ° C.
• Humidity (non-condensing) for operation: 20% ~ 85% relative humidity. Humidity (non-condensing) for storage: 5% ~ 95% relative humidity.

POWER SUPPLY IMPORTANT FEATURES

• Current power supply is a separate component of a personal computer. The PSU must be installed in the metal case of the system unit with sufficient electromagnetic shielding.
• The device has protection class 1, protective earth is directly connected to the metal case. When installing, make sure that the power supply is installed correctly.
• The power supply unit is intended for use in a 230 V / 50 Hz network with grounding. Minimum operating temperature +10 ° C, Maximum +40 ° C. Do not allow moisture to get on the device and do not use the device in rooms with high humidity. Do not forget that the power of the PSU decreases with increasing of temperature.
• The current loss must not exceed 3.5 mA.
• During installation of the power supply, pay particular attention to ensuring effective ventilation. Direct contact with the cooling fan is prohibited.
• Do not attempt to disassemble the device yourself; there is a risk of electric shock. Inside there are no parts that the user can repair, when parsing the PSU, you lose the warranty. Contact a service center by a specialist.
• Consider the power consumption of the PC during assembly. Different configurations consume different amounts of energy. If the total power consumption exceeds the power of the PSU, then the PC will not function properly or function at all.

WARNING!

1. The device is not intended for outdoor use. Use this PSU only in the office or at home. Please carefully read the user manual for all components of your PC before assembly.
2. Do not disassemble the device yourself under any circumstances.

OPERATING CONDITIONS AND PRECAUTIONS

1. Ensure that you have all the necessary parts before start to use case.
2. It`s important to use gloves during assembling and prevent injures of your hands.
3. Don`t use additional efforts when you fix components to prevent damage of case or case mounting.
4. Make sure that all components of the product are intact and functioning properly.
5. Do not use abrasive, whitening cleaners to clean the product to avoid scratches and surface damage.
6. Store and operate out of the reach of children and pets.

STORAGE, TRANSPORTATION AND UTILISATION

1. Transportation of product in original packing to avoid damages.
2. If components are already were installed in cases, please check how securely they are fixed or remove it before preparation of case for transportation.
3. Avoid contact with moisture or water on the surface or inside of case to prevent corrosion of material.
4. Utilization of case and it`s packing in accordance with utilization regulations in your country.

Warranty card

• Product information
• Product
• Serial number
• Seller Information
• Trade organization name
• The address
• Date of sale
• Seller stamp

Coupon

Seller stamp
Date of application
Cause of damage

References

• Компания ERC: Сервис-центр(СЕРВІСНИЙ ЦЕНТР)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>