2E TACTICAL 2E PCS101 RGB Multimedia Speakers User Manual
- June 13, 2024
- 2E TACTICAL
Table of Contents
2E TACTICAL 2E PCS101BK RGB Multimedia Speakers User Manual
SAFETY MEASURES
- Do not disassemble or repair the device by yourself. Service and repairs should only be done by qualified service staff.
- Avoid foreign objects and substances into the openings of the device.
- Avoid high humidity, water and dust getting into the device.
- Avoid high temperatures: do not install the device near heating devices and avoid exposure to direct sunlight.
- Do not use aggressive solvents to clean the device. Use a soft dry cloth for cleaning.
- If the device is damaged or does not work properly, immediately unplug the power cord and stop using it.
UNPACKING
Unpack the product carefully, remove all it’s parts.
Check the completeness and availability of the completed warranty card (store stamp and date of sale are required).
Before using the product carefully read the instructions and save it for all period of use.
KEY FEATURES
- Reliable 2’’ speakers with a total power of 10 watts.
- Effect of stereo sound at all locations.
- Powered by USB and 3.5mm for audio transmission.
- Adjustment of specifications and dimensions for headphones and microphones.
- Easy Plug & Play connection. No drivers or software add-ons required.
- Practical and reliable design.
- Stylish dynamic lighting.
USAGE
The speaker can be powered from any USB port of a computer or laptop.
Use a 3.5mm connector to send audio to the speaker. Plug it into a jack on a computer, laptop, or other signal source.
Use the volume control on the speaker cabinet and the audio source setting to adjust the speaker volume.
Turn the volume control all the way to the left to turn off the power.
To connect the headset to the speaker system, connect the headset connectors to the speaker system, the microphone jack is on the left and the audio jack is on the right.
Press the touch area on the speaker cabinet to adjust the lighting modes.
FREQUENTLY ASKED QUESTIONS AND ANSWER
The speaker system does not work.
Check if the speaker is connected to the USB port.
Disconnect and reconnect it. Make sure the USB port is working.
There is no sound or it is very quiet.
Check if the volume control is set to the lowest volume position. Change its position. Check the quality of the connection to the audio source.
SPECIFICATION
- Driver dimensions: 2 x 2’’
- Power: 10 W (2 x 5W)
- Frequency response: 300 – 20,000 Hz
- System type: 2.0
- Impedance: 4 Ohm
- Connection: 3.5 mm jack
- Power supply: USB 5V
- Unit dimensions (HxWxD): 44×8.3×8.8 cm
- Body material: plastic
- Delivery set: acoustic system, user manual