IPEVO V4K PRO Ultra HD USB Visualiser with AI-Enhanced Microphone User Guide
- June 6, 2024
- IPEVO
Table of Contents
Quick Start Guide
V4K PRO Ultra HD USB Visualiser with an AI-Enhanced Microphone
Customer Service
Email: cs@ipevo.com
www.ipevo.com
Tel: +1-408-490-3085 (USA)
Copyright© 2021 IPEVO Corp. All rights reserved.
The Basics
V4K PRO is an Ultra HD visualizer with a multi-jointed arm, which allows any
position and orientation of its lens.
It is equipped with an innovative AI-Enhanced Voice technology, which reduces
background noises during communication,
leaving your voice natural, undisturbed, and easy to hear.
AI-Enhanced Voice technology
V4K PRO is equipped with an IntelliGo chip, which uses AIVC™ noise reduction technology. This noise filter utilizes artificial intelligence, which was trained with over 500 million distinct data, and is highly effective in maintaining the natural sound of the human voice while removing disturbing environmental noise with high accuracy.
Getting to Know Your V4K PRO
V4K PRO consists of three parts:
An 8 Megapixel camera, a versatile multi-jointed arm, and a weighted base.
-
Camera
– The camera’s head can be swiveled in order to change the angle or orientation of your shot. -
Multi-jointed stand:
– Quickly and easily change the camera’s height and position to capture your materials perfectly.
– Tighten loose joints by turning the connecting bolts clockwise with a coin. -
Weighted base: Provides a stable base for V4K PRO.
-
Focus button: Focuses the camera or changes the focus mode.
• Press once to focus.
• Press and hold until the LED indicator flickers to change the focus mode to AutoFocus-Single (AF-S). By default, the focus mode is set to AutoFocus-Continuous (AF-C).
• Press again without holding to change the focus mode back to AF-C. -
AI-Enhanced Voice ON/OFF
• Activate it by moving the slider to the right (to the side marked by the letters “AI”). -
LED light ON / OFF
-
Exposure toggle: Provides exposure customization.
-
LED indicator: Turns white if V4K PRO is in use and provides video feed.
-
Microphone:
• Turns on when V4K PRO is in use. You can select it as your audio device.
• Recommended speaking distance for best sound results: 11.8″ to 27.6″.
Software Compatibility
V4K PRO is a standard UVC camera and can be used with various software as long
as they recognize the video source from a UVC camera. However, to fully
utilize your V4K PRO, we’d recommend using it with IPEVO Visualizer software.
IPEVO Visualizer offers many useful features for your lessons or
presentations, such as video recording, snapshot, or picture-in-picture, and
allows you to modify the video feed in real-time.
If you’re using V4K PRO with third-party video conferencing software such as
Skype, Zoom, GoToMeeting, or Google Meet, you can also utilize IPEVO
CamControl to adjust some basic camera settings like image rotation, exposure,
and focus, without burdening your computer’s performance.
IPEVO Visualizer:
https://global.ipevo.com/uk/software/visualizer#download
IPEVO CamControl:
https://global.ipevo.com/uk/software/camcontrol#download
Safety Information
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate the equipment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
For products available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
Precaution
Do not use/store the product in the following places:
- Near heat sources
- Near steam or greasy smoke
- Locations with high humidity
- Sandy or dusty places
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>