2E PCS234BK Multimedia Speakers User Manual
- June 13, 2024
- 2E
Table of Contents
- 2E PCS234BK Multimedia Speakers
- Product Information
- Product Usage Instructions
- SAFETY MEASURES
- UNPACKING
- KEY FEATURES
- USAGE
- Schematic representation of a speaker system
- FREQUENTLY ASKED QUESTIONS AND ANSWERS
- SPECIFICATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
2E PCS234BK Multimedia Speakers
Product Information
Product Name: Multimedia speakers 2E-PCS234BK
Features:
- Mini jack 3.5mm
- USB port
- Backlight with touch switch
- Volume control
- Headphone jack
Safety Measures:
- Unpack the product carefully, remove all its parts.
- Check the completeness and availability of the completed warranty card (store stamp and date of sale are required).
- Before using the product, carefully read the instructions and save them for the entire period of use.
Specifications:
- USB: Yes
- Mini jack 3.5mm: Yes
Product Usage Instructions
- Connect the speaker to a USB port.
- If the speaker system does not work, disconnect and reconnect it.
- If there is no sound or it is very quiet, check if the volume control is set to the lowest volume position and adjust it accordingly.
- Check the quality of the connection to the audio source.
SAFETY MEASURES
- Do not disassemble or repair the device by yourself. Service and repairs should only be done by qualified service staff.
- Avoid foreign objects and substances into the openings of the device.
- Avoid high humidity, water and dust getting into the device.
- Avoid high temperatures: do not install the device near heating devices and avoid exposure to direct sunlight.
- Do not use aggressive solvents to clean the device. Use a soft dry cloth for cleaning.
- If the device is damaged or does not work properly, immediately unplug the power cord and stop using it.
UNPACKING
- Unpack the product carefully, remove all it’s parts.
- Check the completeness and availability of the completed warranty card (store stamp and date of sale are required).
- Before using the product carefully read the instructions and save it for all period of use.
KEY FEATURES
- Reliable 2.5’’ speakers with a total power of 6W
- Excellent stereo sound at all volume levels
- USB power and 3.5mm jack for audio input
- Volume control and headphones output.
- Easy Plug&Play connection. No drivers or additional software required
- Usable and reliable design
- Dynamic backlight with the ability to adjust on the body
USAGE
- Two speakers of the audio system should be located symmetrically relative to the listener at a distance of at least one meter.
- The speaker can be powered from any USB port of a computer or laptop.
- Use a 3.5mm connector to send audio to the speaker. Plug it into a jack on a computer, laptop, or other signal source.
- Use the volume control on the speaker wire and adjust the audio source for speaker volume change.
- To adjust the backlight or mute modes, press the touch area on the speaker.
- Use the volume control to turn the speaker on and off. In the extreme left position, the speaker and lighting are turned off.
Schematic representation of a speaker system
- Mini jack 3.5mm
- USB
- Backlight with touch swich
- Volume control
- Headphone jack
FREQUENTLY ASKED QUESTIONS AND ANSWERS
-
The speaker system does not work.
Check if the speaker is connected to the USB port. Disconnect and reconnect it. Make sure the USB port is working. -
There is no sound or it is very quiet.
Check if the volume control is set to the lowest volume position. Change its position. Check the quality of the connection to the audio source.
SPECIFICATION
- Driver dimensions: 2*2.25″
- Power: 6W (2*3W)
- Frequency response: 90 – 20,000 Hz
- System type: 2.0
- Impedance: 4Ohm
- Connection: 3.5mm jack
- Power supply: USB 5V
- Satellite size (HxWxD): 18×8.2×9.6 cm
- Body material: plastic
- Delivery set: speakers, user manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>