2E-PCS233BK Multimedia Speakers User Manual
- June 13, 2024
- 2E
Table of Contents
USER MANUAL
Multimedia speakers 2E-PCS233BK
SAFETY MEASURES
- Do not disassemble or repair the device by yourself. Service and repairs should only be done by qualified service staff.
- Avoid foreign objects and substances into the openings of the device.
- Avoid high humidity, water and dust getting into the device.
- Avoid high temperatures: do not install the device near heating devices and avoid exposure to direct sunlight.
- Do not use aggressive solvents to clean the device. Use a soft dry cloth for cleaning.
- If the device is damaged or does not work properly, immediately unplug the power cord and stop using it.
UNPACKING
Unpack the product carefully, remove all it’s parts.
Check the completeness and availability of the completed warranty card (store
stamp and date of sale are required).
Before using the product carefully read the instructions and save it for all
period of use.
KEY FEATURES
- Reliable 2’’ speakers with a total power of 6W
- Excellent stereo sound at all volume levels
- USB power and 3.5mm jack for audio input
- Volume controls
- Easy Plug& Play connection. No drivers or additional software required
- Usable and reliable design
- Dynamic backlight with the ability to adjust on the body
USAGE
Two speakers of the audio system should be located symmetrically relative to
the listener at a distance of at least one meter.
The speaker can be powered from any USB port of a computer or laptop.
Use a 3.5mm connector to send audio to the speaker.
Plug it into a jack on a computer, laptop, or other signal source.
Use the volume control on the speaker cabinet and the audio source setting to
adjust the speaker volume.
Press the touch area on the speaker cabinet to adjust the lighting modes.
Use a long press on the power button on the speaker cabinet to turn the
speaker on and off. Use a short press on the power button to turn the
backlight on and off.
Schematic representation of a speaker system
- Volume up button «+»
- Volume down button «-»
- Power button (short press to turn off the backlight / long press to turn off the power)
- LED backlight
- USB connector for speaker power supply
- Audio connector 3.5mm for audio signal transmission
- Touch area for backlight adjustment
FREQUENTLY ASKED QUESTIONS AND ANSWERS
The speaker system does not work.
Check if the speaker is connected to the USB port.
Disconnect and reconnect it. Make sure the USB port is working.
There is no sound or it is very quiet.
Check if the volume control is set to the lowest volume position. Change its
position. Check the quality of the connection to the audio source.
SPECIFICATION
- Driver dimensions: 2*2″
- Power: 10W (2*5W)
- Frequency response: 130 – 20,000 Hz
- System type: 2.0
- Impedance: 4Ohm
- Connection: 3.5mm jack
- Power supply: USB 5V
- Satellite size (HxWxD): 18×11.4×8.2 cm
- Body material: plastic
- Delivery set: speakers, user manual