2E-PCS231BK Multimedia Speakers User Manual
- June 13, 2024
- 2E
Table of Contents
USER MANUAL
Multimedia speakers 2E-PCS231BK
SAFETY MEASURES
- Do not disassemble or repair the device by yourself. Service and repairs should only be done by qualified service staff.
- Avoid foreign objects and substances into the openings of the device.
- Avoid high humidity, water and dust getting into the device.
- Avoid high temperatures: do not install the device near heating devices and avoid exposure to direct sunlight.
- Do not use aggressive solvents to clean the device. Use a soft dry cloth for cleaning.
- If the device is damaged or does not work properly, immediately unplug the power cord and stop using it.
UNPACKING
Unpack the product carefully, remove all it’s parts.
Check the completeness and availability of the completed warranty card (store
stamp and date of sale are required).
Before using the product carefully read the instructions and save it for all
period of use.
KEY FEATURES
- Reliable 2.5’’ speakers with a total power of 10W
- Excellent stereo sound at all volume levels
- USB power
- Bluetooth and 3.5mm jack for audio input
- Volume controls
- Easy Plug& Play connection. No drivers or additional software required
- Usable and reliable design
- Dynamic backlight with the ability to adjust on the body
USAGE
Two speakers of the audio system should be located symmetrically relative to
the listener at a distance of at least one meter.
The speaker can be powered from any USB port of a computer or laptop.
Use a 3.5mm connector to send audio to the speaker.
Plug it into a jack on a computer, laptop, or other signal source.
Use the volume control on the speaker’s remote control and the audio source
setting to adjust the speaker volume.
Press the touch area on the speaker’s remote control to adjust the lighting
modes.
To turn the speaker on and off, use a long press on the power button on the
speaker’s remote control.
To activate the search mode for a new Bluetooth connection, use a short press
on the power button on the speaker’s remote control. Press the power button
again to play music from a 3.5mm cable source.
To connect the speaker system to a smartphone, find and select it from the
list of Bluetooth devices available for connection.
SCHEMATIC REPRESENTATION OF A SPEAKER SYSTEM
- Touch area backlight adjustment
- Volume up button «+»
- Volume down button «-»
- Power button (short press to change AUX 3.5mm and Bluetooth mode / long press to power off and power off
FREQUENTLY ASKED QUESTIONS AND ANSWERS
The speaker system does not work.
Check if the speaker is connected to the USB port.
Disconnect and reconnect it. Make sure the USB port is working.
There is no sound or it is very quiet.
Check if the volume control is set to the lowest volume position. Change its
position. Check the quality of the connection to the audio source.
SPECIFICATION
- Bluetooth version: 5.0
- Driver dimensions: 2 * 2.5’’
- Power: 10 W (2 * 5 W)
- Frequency response: 100 – 20,000 Hz
- System type: 2.0
- Impedance: 4 Ohm
- Connection: 3.5 mm jack
- Power supply: USB 5V
- Unit dimensions (HxWxD): 18×10.5×8.2 cm
- Body material: plastic
- Delivery set: acoustic system, user manual