2E GAMING S613ARGB-400 ARGB 400W PC Case User Guide

2E GAMING S613ARGB-400 ARGB 400W PC Case

Product Specifications

• Model: 2E PC CASE (S613ARGB-400)
• Compatibility: Desktop/SGCC 0.5 Micro ATX/ITX
• Drive Bays: 1x 5.25”, 3x 3.5”, 2x 2.5”
• Front Panel Ports: 1x USB 3.0, 1x USB Type-C, HD Audio+MIC
• Power Supply: ARGB 400W

Product Usage Instructions

Drive Installation

To install drives in the case:

1. For 5.25” drives: Insert the drive into the designated bay and secure it in place.
2. For 3.5” HDDs: Mount the HDD in the appropriate slot.
3. For 2.5” SSDs: Secure the SSDs in the dedicated slots.

Front Panel Connections
Connect the front panel ports as follows:

• USB 3.0 and USB Type-C connections
• HD Audio and MIC connections

Power Supply and Cabling
Connect the power supply as per the following specifications:

• 1x 24-pin connector
• 1x 4-pin (12V) connector
• SATA power connections x2
• 4-pin MOLEX connectors x2

Frequently Asked Questions (FAQ)

• Q: How many drivebays does the case have?
  A: The case has a total of 6 drive bays – 1x 5.25”, 3x 3.5”, and 2x 2.5”.

• Q: What is the power supply capacity?
  A: The power supply included is an ARGB 400W unit.

• Q: What front panel ports are available?
  A: The front panel features 1x USB 3.0, 1x USB Type-C, and HD Audio+MIC ports.

INSTRUCTION

• Product: computer case with PSU.
• Using: for placing components of personal computer system.
• Model: 2Е-S613ARGB-400.

SPECIFICATION

• Type/Color Desktop/black
• Material Plastic, steel SGCC 0.5мм
• Motherboards Micro ATX/ITX
• External 5.25’’ 0 pcs
• Internal 3.5’’ 2 pcs
• Internal 2.5’’ 2 pcs
• Expansion slots 4 pcs
• Included fans, mm Top panel: 1x 80
• I/O Ports, buttons 1xUSB 3.0,1xTYPE-C, HD Audio+MIC, Power,
• Reset, ARGB strip
• Power supply 400 W
• Max VGA length, mm low profile
• CPU cooler height, mm 78
• Dust filter –
• Case position horizontal/vertical
• Size (WxHxL), mm 400х99х314
• Package size (WxHxL), mm 449х155х349
• Weight without package, kg 3,3
• Weight with the package, kg 3,8
• County of origin Сhina
• Guarantee 12 months

DISCRIPTION

1. GENERAL CASE PART
   • 1 (а) place for motherboard;
   • 1 (b) place for power supply;
   • 1 (d) place for 80mm fan.
2. REAR CASE PANEL
   • 2 (а) place for connecting the power supply cable of the power supply;
   • 2 (b) expansion slots for low-profile VGA;
   • 2 (c) place of exit of motherboard connectors
3. INSTALLATION OF COMPONENTS. SLOTS: 5,25’’, 3,5’’, 2,5’’.
   • 3 (а) place and fix of first HDD 3.5’’ under the frame above the power supply;
   • 3 (b) Place and fixing of SSD 2.5’’ to the internal bay;
   • 3 (c) the location of the second 3.5’’ HDD
4. INSTALLATION OF COMPONENTS. SLOTS: 5,25’’, 3,5’’, 2,5’’.
5. 4 (а) place and fixation of HDD 3.5’’;
6. 4 (b) place and fixate two 2.5’’ SSDs: simultaneously in the internal compartment and under the frame above the power supply;
7. 4 (c) the location of the SSD 2,5’’.

BUTTONS AND PORTS

COMPLETE SET

Appearance and equipment of item can be supplemented or modified for the purpose of the improvement or for improvement of product quality.

POWER SUPPLY SPECIFICATION

SYSTEM COMPONENTS INSTALLATION

1. Takes down the foot Twists off the screw on the rearpanel to take down the side panel
2. Lies the case on the tabletop Twists off two screws on the 5’’25 bay.
3. Backward pulls the 5’’25 on backward to take out.
4. Install and uninstall power supply may take out of the obstruct piece on the top panel.
5. Puts slanting 5’’25 bay revolution axis position on the rack.
6. Installs the hard disk.
7. Installs CD drive.
8. Installs the motherboard.
9. Cages on the screw 5’’25 revolving to the rack, and installs VGA card.
10. Lock the foot after (assemble the side panel)

POWER SUPPLY INSTALLATION

1. Take off the front panel.
2. Remove 2pcs screw, take down the power supply.
3. Pull forward the cable.
4. Assemble the power supply on the front plate and lock by 3pcs screw.

POWER SUPPLY INSTALLATION AND CONNECTION

Before you begin installation and start using the power supply, we propose to study the current manual. Step A: Removing the power supply which was installed if necessary:

If you are building a new system, go to step B.

1. Disconnect the AC power cord from the wall outlet or UPS, as well as from the existing power supply.
2. Disconnect all cables that connect power to the graphics card, motherboard, and other peripherals.
3. Following the instructions for the system unit, remove the power supply.
4. Go to step B.

Step B: Power supply installation:

1. Make sure that the AC cable of the power supply is not connected.

2. Following the instructions of the computer case operation guide, install the power supply unit and fix it with screws from the assembling kit.

3. Connect the 24-pin power cable. The general 24-pin power cable is equipped with a removable 4-pin connector, which ensures compatibility with both 24-pin and 20-pin connectors on the motherboard.

   • a. If the motherboard has a 24-pin connector, you can directly connect the 24-pin power cable from the power supply to it.
   • b. If the motherboard has a 20-pin connector, divide the 4-pin cable from the 24-pin connector and then connect the 20-pin cable to the motherboard without connecting the 4-pin connector.

4. Connect 8-pin + 12V cable.

   • a. If the motherboard is equipped with an 8-pin + 12V connector, connect the cable with the 8-pin connector directly to the motherboard.
   • b. If the motherboard has a 4-pin connector, divide the 4-pin cable from the 8-pin connector and then connect the 4-pin cable directly to the motherboard.

5. Connect the peripheral cables, PCI-Express and SATA cables.

   • a. Connect the peripheral cables to the power connectors of the hard drive and CD-ROM / DVD-ROM.
     b. Connect the SATA cables to the power connectors of the SATA hard drive.

   • c. If necessary, connect the appropriate PCI-Express cables to the power connector on the PCI-Express graphics card.

   • d. Connect peripheral power cables to any peripherals with a small 4-pin connector.

   • e. Make sure all cables are securely connected.

6. Connect the AC power cable to the power supply and turn it on by turning the switch to the ON position (it is marked with an “I”).

ENVIRONMENT REQUIREMENTS

• Operating temperature: +10 ° C ~ +40 ° C.
• Storage Temperature: -40 ° C ~ +70 ° C.
• Humidity (non-condensing) for operation: 20% ~ 85% relative humidity.
• Humidity (non-condensing) for storage: 5% ~ 95% relative humidity.

POWER SUPPLY IMPORTANT FEATURES

• The current power supply is a separate component of a personal computer. The PSU must be installed in the metal case of the system unit with sufficient electromagnetic shielding.
• The device has protection class 1, protective earth is directly connected to the metal case. When installing, make sure that the power supply is installed correctly.
• The power supply unit is intended for use in a 230 V / 50 Hz network with grounding. Minimum operating temperature +10 ° C, Maximum +40 ° C. Do not allow moisture to get on the device and do not use the device in rooms with high humidity. Do not forget that the power of the PSU decreases with increasing of temperature.
• The current loss must not exceed 3.5 mA.
• During the installation of the power supply, pay particular attention to ensuring effective ventilation. Direct contact with the cooling fan is prohibited.
• Do not attempt to disassemble the device yourself; there is a risk of electric shock. Inside there are no parts that the user can repair, when parsing the PSU, you lose the warranty. Contact a service center by a specialist.
• Consider the power consumption of the PC during assembly. Different configurations consume different amounts of energy. If the total power consumption exceeds the power of the PSU, then the PC will not function properly or function at all.

WARNING!

• The device is not intended for outdoor use. Use this PSU only in the office or at home. Please carefully read the user manual for all components of your PC before assembly.
• Do not disassemble the device yourself under any circumstances.

OPERATING CONDITIONS AND PRECAUTIONS

1. Ensure that you have all the necessary parts before starting to use the case.
2. It`s important to use gloves during assembling and prevent injuries of your hands.
3. Don`t use additional efforts when you fix components to prevent damage of case or case mounting.
4. Make sure that all components of the product are intact and functioning properly.
5. Do not use abrasive, or whitening cleaners to clean the product to avoid scratches and surface damage.
6. Store and operate out of the reach of children and pets.

STORAGE, TRANSPORTATION AND UTILISATION

1. Transportation of product in original packing to avoid damages.
2. If components are already were installed in cases, please check how securely they are fixed or remove it before preparing of case for transportation.
3. Avoid contact with moisture or water on the surface or inside of the case to prevent corrosion of material.
4. Utilization of case and it`s packing by utilization regulations in your country.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the 2E brand computer case with power supply, which was designed and manufactured by the highest quality standards, and we thank you for choosing this particular product.
We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: the product model, date of sale, serial number of power supply, warranty service period, and the seller’s seal. *
2. The product is intended for consumer use. When using the product in commercial activities, the seller/manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
3. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
4. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules outlined in the instruction manual.
5. The product is removed from warranty service in the following cases:
6. misuse and non-consumer use;
7. mechanical damage;
8. damage caused by the ingress of foreign objects, substances, liquids, insects;
9. damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
10. damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
11. when operating equipment in the power supply network with a missing single ground loop;
12. in case of violation of seals installed on the product;
13. lack of serial number of the device, or inability to identify it.
14. The warranty period is 12 months from the date of sale.

Tear-off maintenance tickets are provided by an authorized service center.
The completeness of the product is checked. I have read the terms of the warranty service, no complaints.
Customer Signature____

Product Information

• Product
• Model
• Serial number

Seller Information

• Name of trade organization
• Address
• Date of sale
• Seller stamp

Warranty coupons

Ticket number 3
Seller stamp
Ticket number 2
Seller stamp
Ticket number 1
Seller stamp
date of the application
Cause of damage
Date of execution date of the application
Cause of damage
Date of execution date of the application
Cause of damage
Date of execution

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>