allen roth FSI 6802B MBLK Bexley 72-in to 144-in Matte Black Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 6802B MBLK Bexley 72-in to 144-in Matte Black Steel Single
Curtain Rod
Product Information
The product is a drapery rod set manufactured by ALLEN+ROTH. ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Package Contents
- A – Drapery Rod x 3
- B – Curtain Hooks x 2
Hardware Contents
- AA – Screws x 6
- BB – Anchors x 6
- CC – Lock Rods x 3
Estimated Assembly Time
- 30 minutes
Product Usage Instructions
- Make sure to use a level (not included) during installation to ensure proper alignment.
- If necessary, use the provided screws and anchors to secure the drapery rod set.
- Attach the curtain hooks to the drapery rod.
- Hang the drapery rod with the attached hooks on the brackets.
- Secure the lock rods in place to hold the drapery rod firmly.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
*Image is for example only. Appearance of actual product may vary.
TROUBLESHOOTING
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missina or damaged do not attempt to assemble the product
- Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIANT?
- Visit lowes.com for more information.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents solvents or polishes as they maY damage the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors. NOTE
Anchors are nor necroed for all Installation types. -
Attach bracket to wall using screws provided. NOTE
Repeat steos ^ to 3 for additional brackets. Use level not included) if necessary. -
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod. NOTE/ Altes point you should nave a complete leesco pic rod witr2 large diameter rods connected with 1 smaller diameter rod section in the middle.
-
Reattach finial and tighten set screws on brackets to lock rod in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>