Olodumare WF296634 Solid Wood Twin Bunk Bed Over Instruction Manual

Olodumare WF296634 Solid Wood Twin Bunk Bed Over

ASSEMBLY INSTRUCTION

SKU CODE: (WF296634-WF296635-WF296636)

This set includes 3 boxes if don’t receive the full 3 boxes please contact our customer service team

SAFETY WARNINGS

1. This bed is designed for use only with mattress (es) meeting the following specifications on the upper bunk, and lower bunk

   • Upper bed Bed Type
     Twin Standard

   • Length
     74″- 75″

   • Width
     38 1/ 2″

   • Thickness
     6″max
     Lower bed

   • Bed Type
     Full Standard

   • Length
     74″- 75″

   • Width
     53 1/ 2″

   • Thickness
     B” max

2. Replacement parts, including additional guardrails, may be obtained from any of our (GIGACLOUD TECHNOLOGY (USA) INC. 18961 ARENTH AVENUE CITY OF INDUSTRY, CA, 91748) dealers

3. Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton. Do not remove the warning label from the bed

4. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.

5. The surface of the mattress must be at least 5″ (127mm) below the upper edge of the guardrails

6. Do not allow children under 6 years of age to use the upper bunk.

7. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.

8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.

9. Always use the ladder for entering and leaving the upper bunk: Always use the ladder for entering and leaving the upper bunk.

10. Do not use substitute parts. Contact the manufacturer or dealer for a replacement part

11. The use of a night light may provide added safety precautions for a child using the upper bunk ..

12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.

13. The use of water or sleep flotation mattresses is prohibited

14. STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed that is not designed for use with the bed; for example, but not limited to, hooks, belts, and jump ropes

15. Keep these instructions for future reference

16. Prohibit more than one person on the upper bunk

17. We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet

18. Be certain all staples are out of the box before beginning assembly on the shipping carton.

OPTION 1 : STAIR IN LEFT

OPTION 2: STAIR ON THE RIGHT

PARTS

Part List & Hardware List (Box 1-WF296634)

Part List (Box 2-WF296635)

Part List (Box 3-WF296636)

Hardware List(Box 1-WF296634)

INSTALLATION INSTRUCTION

STEP 1
Below installation. Using hardware #1.#2 connect B6.B8 Wood Ba rs and B7 Danel with B8 Wood Bar

STEP 2 Following below illustration Using hardware #1 connect Bl ,B4 Wood Bars,B3 panel, and The frame (Completed in step 1) with A1.A2 Legs

STEP 3: Following below illustration :.
Using hardware #1 connect BI ,B4,B6,B9 Wood Bars,B3(x2) panels with A3.A4 Legs

STEP 4: Following below illustration

STEP 5: Following below illustration :.

STEP 6
Following below illustration :.

• Using hardware #8,#9 and Dowel 7 connect Frame(Completed on step 2,step 3) with
• Frame(Completed on step 4),Side Rails Cl and Guard Rails C6(x2)
• Using hardware #13 connect Stop Drawer(#17) with Siderail  rail Cl
• Look at the detail view for more detail

STEP 7
Following below illustration :.

• Using hardware #10,#9 connect C7 Rail with Frame(Completed on step 6)
• Using hardware #16,#9 and Dowerl #11 Connect D8(x3) Panels with Frame(Completed on step 6)
• Put C5(x2) Panels into it position
• Look at detail view for more detail

STEP 8
Following below illustration :.

• Using hardware #8,#9,#16 and Dowel 11 connect Frame(Completed on step 10) with Frame(Completed on step 5)
• Look at detail view for more detail\

Following below illustration :.

• Using hardware #12 connect Slat D5 with Center Leg D6
• Using hardware #13 to Assembly Slats L4(x12),L5(x2),L7(x14)
• With Frame (Completed on step 7)
• Look at the detail view for more detail

STEP 10
Following below illustration:

• Using hardware #4,#15,#18,#19 to Assembly HI Frame with Frame(completed on step 8,9-13)
• Look at the detail view for more detail

STEP 12:
CONGRATULATION. YOU HAVE COMPLETED THE BED. just one more step to push 2 Drawer into it position

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>