acer EB0 Series LCD Monitor User Guide
- June 13, 2024
- Acer
Table of Contents
- EB0 Series LCD Monitor
- Important safety instructions
- Package contents
- Attaching the monitor to the stand
- Connecting your monitor to a computer
- External controls
- Regulations and safety notices
- CE declaration of conformity
- SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LCD MONITOR
EB490QK
EB0 Series LCD Monitor
EB0 Series
USER GUIDE
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
-
To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently. -
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
-
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
-
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
-
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
-
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
| LCD monitor
---|---
| Power cord
| DP cable (optional)
| HDMI cable (optional)
| VGA cable (optional)
| Audio cable (optional)
| Quick start guide
Attaching the monitor to the stand
- Place the monitor face down on a flat and clean surface.
- Align the screw holes on the monitor with the screw holes on the stand.
- Replace the four screws that secure the monitor to the base. Tighten the screws firmly.
Connecting your monitor to a computer
- Turn off your computer and unplug your computer’s power cord.
- Connect the signal cable to the VGA (optional) and/or DP (optional) and/or HDMI (optional) input socket of the monitor, and the VGA (optional) and/or DP (optional) and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
- Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable.
- Insert the monitor power cable into the power port at the back of the monitor.
- Plug the power cords of your computer and your monitorinto a nearby electrical outlet.
External controls
1| | LED Indicator| Blue indicates power on.
Amber indicates standby/ power saving mode.
---|---|---|---
2| | Power button| Turns the monitor on/off.
3| Shortcut menu| Shortcut menu change| When the shortcut menu appears, this
button is used to switch around.
Exit| Exit| When the OSD menu is active, this button will act as the exit key
( exit OSD menu).
4| Menu / Enter| OSD functions| Press to view the OSD. Press again to enter a
selection in the OSD.
AUTO| Auto| Press Auto and the monitor will automatically optimize the display
position, focus, and clock of your display.
5| PIP / A| Picture in picture hotkey / Up| a.Use the PIP hotkey to active the
picture-in-picture function.
b.Press this button to select the desired item when in OSD menu.
INPUT| Input source switching| a.Use the INPUT hotkey to enter Input select
menu.
b.Press this button to select the desired item when in OSD menu.
6| | Empowering Key / Down| a.Press this button to select scenario mode.
b.Press this button to select the desired item when in OSD menu.
| Volume Key| a.Press this button to adjust volume.
b.Press this button to select the desired item when in OSD menu.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful Interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified
to comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio
and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void
the user authority, which isgranted by the Federal Communications Commission,
to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in private household in the European
Union
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your wasteequipment by handing it over it a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a mannerthat protects human health and the
environment. For more information about where you candrop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
SPECIFICATIONS
| LCD Panel | Driving system | TFT Color LCD |
|---|---|---|
| Size | 48.5″W(123 cm) | |
| Pixel pitch | 0.27963(H) x 0.27963(V) mm | |
| Brightness (cd/m2) | 300 (Typ) | |
| Contrast | 100,000,000:1 Max (ACM) | |
| Viewable angle | CR=10, 178°(H), 178°N) | |
| Response time | 4ms (G to G) | |
| Panel Type | In-Plane Switching | |
| Video | R, G, B Analog Interface | |
| H-Frequency | 24KHz-83KHz | |
| V-Frequency | 55Hz-76Hz | |
| Display Colors | 1.07B(8bit+ FRO | |
| Dot Clock | 594 MHz | |
| Max. Resolution | 3840 x 2160@60Hz | |
| Plug & Play | VESA DDCCVDDC2B | |
| Energy Efficiency Class | A+ | |
| °Annual Energy Consumption | 82 (kWh) (for HDMI-input Model) | |
| Power consumption (at 300 nits) | On Mode | 56W(typical) |
| Sleep Mode | 0.45W(typical) | |
| Off Mode | 0.4W(typical) | |
| Input Connector | D-Sub |
DP (Only DP-Input Model)
HDMI (Only HDMI Model)
InputVideo Signal| Analog:0.7Vp-p(standard), 75 OHM, Positive
DP signal (Only DP Model)
HDMI signal (Only HDMI Model)
Speakers| 10W x 2(Only Audio-Input Model)
Maximum Screen Size| Horizontal| 1073.8mm
Vertical| 604mm
Power Source| 100-240V—, 60/50Hz
Environmental Considerations| Operating Temp: 0° to 40°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 90%
Dimensions (Wx H x D)| 1108.5 x 700.4 x 237.4mm
Weight (N. W.)| 12kg (net)
Mechanism specifications| Tilt: No
Pivot: No
Swivel: No
Detachable foot stand: Yes
Height adjustment: No
External Controls| Buttons| Power Button PIP/Input
Page Left /Right/Exit
E(Empowering) Key/ Volume
Menu/Enter
Functions| AcereColor Management Auto Config
BlueLight Language
Brightness OSD Timeout
Contrast Wide Mode
Colour Temp DDC/CI On/Off
sRGB mode ACM On/Off
Gmma Input
Super Sharpness OD
6-axis Hue DP Format
6-axis Saturate Auto Source
H.Position Quick Start Mode
V.Position PIP/PBP
Focus Reset
Clock Information
°AII specifications are subject to change without notice.
Regulatory Compliance
Find manuals
and other documents for your Acer product on the official Acer support
website.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.