QCY BH23HT09A True Wireless Earbuds User Manual

**BH23HT09A

**

https://mapp.qcymall.com/qcyearphones/zh/download/qcy

For better using experience,please scan to download QCY APP before start-up.

Overview

Choose Your Eartips:
Please try medium eartips first as they fit most people.

How to Connect

First Time Connection:

1. Pick up two earbuds, tear off their isolation films and push them back in case to activate.
2. Pick up both earbuds again.
3. On phone, search QCY MeloBuds Neo and tap to connect.

• Earbuds will auto power on the moment picked up. If they don’t, please charge and try again.

One Press to Turn Connectable：

1. Earbuds were connected to phone before.
2. Push earbuds into case and leave the case lid open.
   Press and hold charging case button for 3s or until LEDs on earbuds blink white then pick up earbuds again. They will then turn connectable to phone.

Multi-Point Connection

1. Refer to How to Connect to connect earbuds to PhoneA and turn off its Bluetooth to turn earbuds connectable.
2. On PhoneB, search and tap QCY MeloBuds Neo to connect.
3.  Turn on PhoneA’s Bluetooth and tap QCY MeloBuds Neo to connect.

Factory Setting

Delete Connectivity Records:
(Try the following steps if earbuds fail to be connected)
Push in earbuds case and press and hold charging case button for 10s or until LEDs on earbuds blink red 5 times.

• Please refer to First Time Connection after Factory Setting.

How to Wear

1. Please put on earbuds properly then adjust them to fit yourself.
2. Keep microphone towards your mouth.
3. It will cause a bad calling or listening experience to wear them in a wrong way.

LED on Earbud
LED will turn solid red when earbud is being charged and turn white for 30s once it is topped up.
LED on Case
LED will glow solid red when the case is being charged and turn white once it’s topped up.
If the battery level is under 20%, press the button and LED will turn red for 5s.
If not, press the button and it will turn white for 5s.

Functions

| Power-on: Pick up earbuds or keep touching the panel for 1.5s
---|---
| Power-off: Push them back in case
****| Answer/end call: Double touch the panel
| Ignore call: Keep touching the panel for 1.5s
| Skip track forward: Triple touch right panel
| Voice assistant: Triple touch left panel
| Playback/pause: Double touch the panel
| Gaming mode: Keep touching left panel for 1.5s
| Vol +: When they play music, touch right panel
(Volume cannot be adjusted during calling)
| Vol -: When they play music, touch left panel
(Volume cannot be adjusted during calling)
| Switch mode: Keep touching right panel for 1.5s to switch among ANC ON, ANC OFF and Transparency

Warranty Card

Warranty Period
12 months after you purchase this item (or you may inquire your local shopper for more details).
Free Service：
Supposing any defects caused by quality issues occur within the warranty period , please take this warranty card and purchase receipts to your distributor for free exchange servIce.
Model Number:
Date of Purchasing:
User’s Name:
User’s Phone:
User’s Address:
Shop’s Name:
Shop’s Address:
Comments:
Free exchange service will not be accessed under following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

FCC Statement

This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Tips

1. Before using the earbuds, please read the manual carefully and keep it for future references.
2. The earbuds need to be fully charged prior to first-time use.
3. If the earbuds are left unused for over two weeks, please recharge.
4. Please use the chargers made by qualified manufacturer.
5. If earbuds fail to be found by phone, please re-turn them connectable or restore factory settings. If a program error of phone occurs, please turn off and on Bluetooth function or reboot the phone.

Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

References

• QCY Premium Audio Solutions|QCY Official Site|Be Creative,Go Beyond

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>