Trudian TD-RM01 Wiegand Reader User Guide
- June 12, 2024
- Trudian
Table of Contents
Trudian TD-RM01 Wiegand Reader
Product Information
| Applicable Model | TD-RM01, TD-RM02, TD-RM03, TD-RM04 |
|---|---|
| Version | 1.0 |
| Date | May 2023 |
| Product Overview | A Wiegand Reader capable of reading IC cards. It supports |
various communication modes such as swipe card, APP, remote, and
password (optional). It has a card capacity of 40000pcs and works
with the Wegen 26 / Wegen 34 management platform card issuing
mode.
Parameter|
Working voltage| DC12V
Swipe distance| 0~4CM
Working current| 80MA
Card reading type| IC card
Communication mode| Swipe card, APP, remote, password (optional)
Working temperature| -20°C to 70°C
Card capacity| 40000pcs
Relative humidity| 20% to 93%
Open mode size| 86 86 8MM
Installation method| Swipe card, APP, remote, password (optional)
Product Usage Instructions
Wiegand Reader Installation diagram:
(a) Connect the signal line in the back of the read head device as shown in the figure below:
(b) Install the reading head device into the 86 box:
(c) Snap together the read head panel and read head body:
Wiring Instruction:
| Operating mode selection | Wire color | Function |
|---|---|---|
| DC12V | Red Line | Power supply |
| GND | Blace Line | Ground |
| D0 | Green Line | Data 0 |
| D1 | White Line | Data 1 |
| WG34 | Yellow Line | Wiegand 34 |
| LED/BZ | Blue Line | LED or Buzzer control |
If you encounter any issues, please visit our website: www.trudian.com/en/
Headquarters Address: Farbell Technology Park, Yixian Road, Nanlang, Cuiheng New District, Zhongshan City, Guangdong Province, China. Zip Code: 528451. Phone: +86 0760 – 23689666. Email: [email protected]. For support, please contact: [email protected].
Product Overview
Parameter:
| Working voltage | DC12V±10% |
|---|---|
| Swipe distance | 0~4CM |
| Working current | 80MA |
| Card reading type | IC card |
| Communication mode | Wegen 26 / Wegen 34 |
| issuing mode | management platform card issuing |
| Working temperature | -20℃~70℃ |
| Card capacity | 40000pcs |
| Relative humidity | 20% ~ 93% |
| Open mode | swipe card, APP, remote, password (optional) |
| size | 86 86 8MM |
| Installation method | Control box: hanging installation reading head : 86 box |
embedded installation.86 box requires a depth of 50MM inside
Wiegand Reader Installation diagram
-
Connect the signal line in the back of the read head device as shown in the figure below.
-
Install the reading head device into the 86 box, (note that you need to use the embedded wall inside the depth of 50MM style 86 box), lock the screws to fix, as shown in the figure below.
-
Read the head panel and read the head body snap together, first from the upper snap down and then press the lower and bottom screw hole alignment; finally in the bottom of the anti-theft screw hole screwed on the countersunk head machine wire within the plum security screws fixed,as shown in the figure below.
Wiring instruction
Operating mode selection
| Wire color | Function Description |
|---|---|
| Red Line | DC12V |
| Blace Line | GND |
| Green Line | D0 |
| White Line | D1 |
| Yellow Line | WG34 |
| Blue Line | LED/BZ |
Notes
- Before powering up, you must confirm the voltage of the power supply and the positive and negative terminals of the power supply.
- When using external power supply, it is recommended to share the power ground with the controller power supply.
- Read the head to the control box wire, it is recommended to use 8-core shielded multi-strand twisted pair network cable. Three of the cores standby, if you do not need to read the head sound and LED light feedback legal card, may not be connected to LED/BZ line, Wegen data line D0 and D1 is recommended for each other better twisted pair, line cross-sectional area recommended 0.22 square millimeters or more, it is recommended that the wiring length does not exceed 100 meters, shielded wire connected to the control box motherboard GND, thickened or double stranded together a power supply to the reading head, help to enhance the performance of the reading head. . (You can also use other multi-core shielded Category 5 wire)
www.trudian.com/en/
HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District,
Zhongshan City, Guangdong Province, China. Zip Code:528451
Phone: +86 0760 – 23689666
E-mail: [email protected]
If the problem is not solved properly,please send the mail to:
[email protected]