Bobtot ET2240A Bluetooth Speakers Portable Wireless Speaker User Guide

June 12, 2024
Bobtot

ET2240A Bluetooth Speakers
Portable Wireless Speaker
**User Guide

**

Device Overview

Bobtot ET2240A Bluetooth Speakers Portable Wireless Speaker -
Overview

Buttons and Ports

Power/TWS
Long press to turn the speaker on/off.
Double click to TWS ,conntect or disconnet with two speakers.
— Volume Down/Previous Button
Short Press to turn down the volume Long Press to go to previous song
+ Volume Up/Next Button
Short Press to turn up the volume Long Press to go to next song.
► Mode/Pause/Play
Short press to pause/play the music.
Short press to accept an incoming call.
Long press to reject an incoming call.
Long press 2s disconnet with BT.
Double click to call back.

Charging Your Device

Plug the included USB type-C cable into the speaker’s charging port, and connect the other end of the cable to a power adapter (not included).Allow approximately 2.5 hours to full charge the battery.
The indicate light is red color when it’s charging. The red light will be off when it’s full charged.
Note: We recommend using a USB wall adapter with a DC 5V= 1A output.

Initial Setup

Bobtot ET2240A Bluetooth Speakers Portable Wireless Speaker -
nitial

  1. Once your speaker is fully charged, press and hold the Power button until you hear a voice prompt indicating the device has entered BT paring mode.’
  2. On your smartphone or tablet, search for the BT device named “Triangle” and tap to connect.
  3. A prompt will play once pairing is successful.

Note:

  1. When you turn on the speaker but no connection, it will automatically shut down after 10 minutes.
  2. When you connected the speaker but no playback, it will automatically shut down after 20 minutes

TWS Sync Mode

Bobtot ET2240A Bluetooth Speakers Portable Wireless Speaker - TWS Sync
Mode

  1. Long press the ” ” about 2s on both speakers to turn them on, and the blue light flashes.
  2. Quickly double-click the “ ” on any one speaker, a prompt sound “connected-indicates the speakers enter into pairing mode, the indicator light of one speaker turned solid blue.
  3. 0n your smartphone or tablet, search for the BT device named “Triangle” and connect it, you could hear the sound “connected” again, which means connect successfully.You can enjoy the music with two speakers together.

Notes:

In TWS Mode, turn off one of the speakers, both of them are off.
Double-click the “ ” button will be disconnected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals