Bobtot Sound Air1 Portable Speaker Wireless Bluetooth User Manual
- June 4, 2024
- Bobtot
Table of Contents
Bobtot Sound Air1 Portable Speaker Wireless Bluetooth
Specifications
- DIMENSIONS: 39 x 3.39 x 4.33 inches
- WEIGHT: 14.1 ounces
- WIRELESS VERSION: 0
- TRANSMISSION DISTANCE: 10m
- OUTPUT POWER : 10W
- FREQUENCY EFFECT: 100Hz-10KHz
- SPEAKER: 52mm, 4010W
- INPUT POWER: 5V=1A
- MAXIMUM CURRENT CONSUMPTION: 1A
- AUDIO SIGNAL INPUT CONNECTOR : Standard ct. >3.5mm earphone jack (stereophonic)
Introduction
The portable Bluetooth speaker produces immersive sound at any volume, pumping out clear treble, finely detailed mids, and significantly boosted bass. Get amazing sound at your house, in your yard, or anywhere else you can think of.
Button Instructions
- Mode button
- Short press: switch function, long press: pair two speakers.
- Previous song
- Power button: press on/off, about 3 seconds/time.
- Play/Pause button
- Short press: play/pause;
- Double press: call-back (wireless mode)
- Short press: connect/hang up (call mode)
- Press 2 seconds: reject (call mode)
- Long press: exit wireless connection
- Next song
- AUX jack
- USB port
- Type-C charging port
- TF card jack
- Volume +
- Volume –
Detailed Instructions for Use
- Wireless Pairing
- 1.1. Before using wireless pairing, please turn on the Bobtot Sound Air1 speaker first.
- 1.2. Turn on your device(Phone, Laptop Etc), search for Bobtot Sound Air1, and connect it.
- Voice Prompts
- 2.1. There is a voice prompt when turning on/off.
- 2.2. Remind 3 limes when it’s low battery, and turn off after 15s_ 2.3. Press the button to the maximum volume with a voice prompt, and the minimum volume without a voice prompt.
- Mode Switching The wireless mode is entered by default after power-on. The sequence of mode switching is as follows: Wireless mode-TF card mode-USB mode-AUX mode.
- LED lights Wireless search status: white light flashes quickly, about 0.5 seconds/time; wireless pairing status: white light is always on Playing status: The white light flashes slowly for about 1.5 seconds/time; Charging status: The red light always on when is charging, and the red light will off when full charge.
- Volume The default volume of the speaker is 70% when ii is power on
- Charging Reminders The machine has a built-in overcharge protection circuit, which can be connected to a computer or charger for about four hours for fully charged. The playing time of each battery will vary depending on the volume used.
- No Working Mode It will automatically shut down after 15 minutes when it’s not playing.
Troubleshooting
- Automatic shutdown: when the battery power is low, the battery protection will be turned on automatically. Please charge for 4 hours Use later
- Unable to play music: The music file storage path cannot be recognized by the player. Please store the music file in the r oot directory of the removable device.
- No sound when connected to the computer: the computer interface is connected incorrectly; please select the correct audio output port
- The key does not respond or the function is disordered: try again after shutting down.
- If the machine is stuck in an abnormal situation, press the reset button in the AUX jack.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Frequently Asked Questions
Will it automatically power off to save battery after inactivity?
Yes, it automatically powers off after 15 minutes of inactivity.
How is the sound quality of this portable speaker? Is it loud enough?
This speaker offers immersive, dynamic sound combined with strong bass, mids, and highs. 360°Stereo sound is actually provided by this Bluetooth speaker. It is audible enough outside to be used. If they can be connected, two speakers can play audio simultaneously. The sound level will rise.
Do wireless speakers need power?
Like wired speakers, wireless speakers also need power. The relationship to power, however, can appear very differently. Wireless speakers can use a tiny AC power line, batteries, or can be charged before use, as opposed to wired speakers, which connect to their source of power through a long connection.
Does the speaker fit in a cup holder on my bike?
Yes, it will fit in a bike’s cup holder.
Does it have an AUX port to connect to non-Bluetooth devices?
Yes, it also has AUX connectivity.
How far away can you hear the music from this wireless speaker?
The Bluetooth version 5.0 technology used by this outdoor Bluetooth speaker enables a larger wireless range of more than 10 meter and rapid pairing with Bluetooth-enabled mobile phones and other devices.
Can I connect this Bluetooth speaker to my iPad?
Yes, it may be connected to any Bluetooth-enabled device.
If you have 2 speaker, can it connect to the same device at the same time?
Yes, you can connect two speakers together.
Is it easy to control the volume?
The speaker does have volume control controls with the symbols + and -. To increase or reduce the volume, press the + or – buttons.
Is this speaker suitable for outdoor movies?
Yes, it provides excellent sound and is a great option for outdoor movies.
Can this speaker be left plugged in constantly?
The speaker’s battery life will be destroyed if you continue to connect it in after it has fully charged.
Will this pair with a Samsung J7?
Yes, the wireless speaker can connect with any devices that support Bluetooth.
I want to buy a portable speaker for my outdoor activities, is this speaker suitable?
Yes, it is the ideal option because it is portable, has a long battery life, and has great sound quality.
Can this speaker remember my paired device?
Yes, it does remember the last device that was associated with it and will instantly connect to it the next time it is switched on.
What is the difference between wireless and Bluetooth speakers?
The two available wireless technologies are Bluetooth and WiFi. WiFi speakers are used to connect to your home network. Since the majority of them use AC power, they frequently require an outlet. A computer, phone, or other device can immediately connect to Bluetooth speakers.