HYTRONIK HDD8200 Switch-Dim to DALI Control Dimming Interface Instruction Manual

HYTRONIK HDD8200 Switch-Dim to DALI Control Dimming Interface

Product Information

dimmer interface provides smooth dimming via the popular Switch-DIM
logic to light fixtures using DALI control technology. It is
suitable for office/commercial lighting, home office/domestic use,
and can be used for retrofit upgrades and new installations.
Hardware Features|

• 100mA DALI broadcast output for up to 50 LED drivers
• 2 Push inputs for flexible manual control
• Permanent Memory
• Short-circuit protection
• Overload protection
• 5-year warranty

Additional Specifications|

• RED IP20
• Operating Temperature: – (To be provided)
• Case Temperature (Max.): – (To be provided)
• Storage Temperature: – (To be provided)
• Relative Humidity: – (To be provided)
• IP Rating: – (To be provided)
• Insulation: – (To be provided)

Product Usage Instructions

To use the Switch-Dim to DALI Control Dimming Interface (HDD8200 DALI), follow these steps:

1. Ensure that the operating voltage is within the range of 220-240VAC and 50/60Hz.
2. Mount the dimmer interface into a standard lighting backbox.
3. Connect the light fixtures that use DALI control technology to the dimmer interface.
4. For manual control, use the 2 push inputs provided on the interface.
5. The dimmer interface supports smooth dimming using the popular Switch-DIM logic.
6. The interface has a permanent memory feature, ensuring that the dimming settings are retained even after power cycles.
7. Make sure to observe the short-circuit protection and overload protection features to prevent any damage to the interface or connected LED drivers.
8. The product comes with a 5-year warranty for added peace of mind.

Product Description

Ideal for mounting into a standard lighting backbox, this dimmer interface provides smooth dimming via the popular Switch-DIM logic to light fixtures using DALI control technology.

• Office / Commercial Lighting
• Home office / Domestic use
  Use for retrofit upgrades & new installations.

Hardware Features

• 100mA DALI broadcast output for up to 50 LED drivers
• 2 Push inputs for flexible manual control
• Permanent Memory
• Short-circuit protection
• Overload protection
• 5-year warranty

Technical Specifications

Environment

Operation temperature| Ta: -20°C ~ +45°C
Case temperature (Max.)| Tc: +75°C
Storage temperature| -40°C ~ 70°C
Relative humidity| 20 ~ 90%
IP rating| IP20
Insulation| Class II
Input & Output Characteristics

Operating voltage| 220~240VAC 50/60Hz
Stand-by power| <0.5W
Load ratings| 100mA,16VDC (max. 50 devices)
Safety & EMC

EMC standard (EMC)

| EN55015, EN61547 EN62479, EN61000
Safety standard (LVD)| IEC/EN 61058, AS/NZS 61058
Radio Equipment (RED)| EN300 328, EN301489-1/-17, EN62479
Certifcation| Semko, CB, CE , EMC, RED, RCM

Mechanical Structure & Dimensions

Wire Preparation

To make or release the wire from the terminal, use a screwdriver to push down the button.

1. 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)

Wiring Diagram

Dimming Interface Operation Notes

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.

1. Short press (<1 second) Push1/Push2 to achieve Turn on/off function. Long press (≥1 second) Push1 to achieve Dimming function, long press
   (≥1 second) Push2 to achieve Color tuning function.

2. When the light is off, long press Push for 15 second, load indicator will flash twice slowly, then enter Push programming mode. If there is no operation in this mode, it will exit automatically after 1min, or short press Push to exit the programming mode.

3. In Push programming mode, Long press Push first to adjust the current brightness to the desired brightness, then press it twice quickly,t he load will flash slowly twice, save the current brightness as the Min Level of the dimmer, then automatically exit Push programming mode.

4. In the Push programming mode, long press Push first to adjust the current brightness to the brightness you want, and then press it quickly for 3 times, and the load will flash slowly for 3 times. Save the current brightness as the brightness when the power is off and the power is on again, and then automatically exit the Push programming mode.

5. In the Push programming mode, press the button for 4 times, and the load will flash slowly for 4 times. Then change the power-on state to the default value (the conventional power-off memory function, which is also the factory default value), and then automatically exit the Push programming mode.

6. In the Push programming mode, the dimming range can be temporarily adjusted to OFF state, so that users can conveniently set the power-on brightness to Off. If you press it twice by mistake while setting it to OFF, it will not set OFF to MIN LEVEL, but physical MIN LEVEL will be used.

7. In the Push programming mode, press it for 6 times or more, and the load will flash for 2 times to reset and restore the factory Settings.

8. Push 1, Push 2 can be set in programming mode.

Additional Information / Documents

1. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/Accessories
2. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

References

• Catalogue_Hytronik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>