CASPR TECHNOLOGIES MEDIK Hospital-Grade Air and Surface Purifier Owner’s Manual
- June 12, 2024
- CASPR TECHNOLOGIES
Table of Contents
- MEDIK Hospital-Grade Air and Surface Purifier
- Indications of Use
- Product Contents
- Installation Hardware
- Replacement Parts
- About CASPR MEDIK
- Specifications
- Recommended Installation Tools
- Installation Requirement
- Installation
- Maintenance / UV Lamp Indicator
- Changing The NCC Cell
- Warranty Information
- Documents / Resources
CASPR MEDIK TM
CONTINUOUS HVAC DISINFECTANT TECHNOLOGY OWNER’S MANUAL
Specifications ● Installation ● Maintenance
MEDIK Hospital-Grade Air and Surface Purifier
Caution: Read manual carefully for proper procedures and operation.
Congratulations
on your purchase of the CASPR MEDIK continuous disinfection Solution.
This unit is designed to be installed into an existing HVAC system and used as
a virtually maintenance free enhanced system for providing low levels of
oxidizing molecules that will reduce microburden on all the surfaces of the
targeted area.
Please read and follow all service procedures outlined in this manual.
Indications of Use
CASPR MEDIK is an innovative no-touch disinfection technology-based device that works without an operator to provide continuous reduction of micro- burdens facility-wide. Proven in independent lab test to effectively reduce clinically relevant pathogens like MRSA, Norovirus, Aspergillus Niger, VRE, C. difficile and more, before they spread. Moreover. it has been found to be:
- Safe to use in occupied spaces
- Works on all surfaces, including floors
- No operator or maintenance required
- Affordable for facility-wide use
- Strategic enough for unit specific targeting
- Easily & affordably installed in the existing HVAC
Product Contents
Installation Hardware
(4) Self-tapping Screws
(2) Cell Mounting Screws
Replacement Parts
Bulbs:
9” Bulb Part Number: BULB-HV-9-002-CASPR
14” Bulb Part Number: BULB-HV-14-002-CASPR Cells(which includes bulbs):
9” NCC Cell Part Number: CELL-HV-9-002-CASPR
14” NCC Cell Part Number: CELL-HV-14-002-CASPR
About CASPR MEDIK
CASPR MEDIK is an enhanced “no touch” continuous disinfection device designed
to supplement normal cleaning and disinfection protocols.
CASPR MEDIK uses Natural Catalytic Conversion (NCC) to generate safe, low
levels of hydrogen peroxide. NCC technology replicates natural purifying
processes by using a high intensity light to activate a proprietary metal
catalytic coating, converting water vapor into hydrogen peroxide. Hydrogen
peroxide acts as an oxidizer inactivating surface and air pathogens. It can
compromise cellular integrity by disrupting cell walls, or internal molecular
structures, rendering contaminants harmless.
Specifications
FEATURES:
- Replaceable NCC Cell
ELECTRICAL:
- 120-277 VAC
- 9” Unit – 47W (start-up), 36.8W (Operation)
- 14” Unit – 73W (start-up), 59.5W (Operation)
MECHANICAL:
- Distribution via air handler
SIZE: (HxWxD)
- 9” Unit: 9¾” x 9¾” x 11”
- 14” Unit: 9¾” x 9¾” x 16.75”
WEIGHT:
- 9” Unit: 3.5 lb
- 14” Unit: 3.7 lb
Warnings
WARNING! – UV light in operation. Disconnect unit from power supply
before servicing.
Failure to follow warnings may result in severe eye damage.
WARNING! – Unit should be mounted at least 24 inches from the heat
exchanger or heating element.
Placing the photocatalytic cell too close to the heating element can cause the
photocatalytic matrix to combust.
To reduce the risk of electric shock, this equipment may have a grounding type
plug that has a third (grounding) pin. This plug will only fit into a
grounding type power outlet. If the plug will only fit into a grounding type
power outlet. If the plug does not fit into the outlet, contact qualified
personnel to install the proper outlet. Do not alter the plug in any way.
Recommended Installation Tools
A – 4.5” Hole Saw Bit
B – 3/8” Drill Bit
C – Drill/Power Driver
D – Utility Knife
E – STET
F – Phillips Head Screwdriver
Installation Requirement
- Unit may be installed up or down stream of the air handler in the HVAC system as long as it is behind the filter.
- The ductwork around the installation area should be cleaned and dry to insure proper adhesion of the gasket materials and any tape used.
- One circular opening, measuring approximately 4.5”, will need to be cut into the existing duct work to install the unit properly.
Electrical Requirement
To use the 120V plug, be sure to locate the unit within 6 ft. of a standard
120V grounded outlet. Long term use on an extension cord is not recommended
due to safety considerations.
Hardwiring Requirement
Permanent wiring of the unit into your HVAC system should be done by a
licensed HVACIns taller or Electrical Contractor only.
For 110-277V: | Black = L1, White = Neutral, Green – Ground |
---|---|
For International Applications: | Brown = L1, Blue = L2, Green/Yellow = Ground |
Installation
-
Find a suitable location to mount your CASPR MEDIK Unit.
-
If necessary, cut away insulation for your plate to adhere to the duct.
-
Using the Adhesive Gasket Plate, trace the hole location onto the duct.
-
Use the Hole Saw and Drill to cut out the marked hole. Alternative Cutting Method
1.Using the Adhesive Gasket Plate, trace the hole location onto the duct. -
Drill holes around the outside edges of the prviously marked hole but inside the outer holes of the Adhesive Gasket Plate. 3. Use the Tin Snips to cut out the space around the marked hole. Installation
-
Remove the plastic backing on your Adhesive Gasket Plate.
-
Press the Adhesive Gasket Plate onto the duct. Secure with the (8) Self-Tapping Screws.
-
Connect the Cell to the Ballast using the two (2) cell mounting screws.
-
Place the unit and cell through the opening and align the four studs with the four holes in the ballast.
Secure the unit by twisting clockwise to lock into place. -
Plug the Unit Power Cable into the receptacle or have a Licensed Electrician or HVAC Installer hardwire the unit directly into the HVAC system.
Maintenance / UV Lamp Indicator
Your CASPR MEDIK requires no periodic maintenance beyond normal replacement of
the bulb at 18 months and the NCC cell with bulb every 3 years.
Note: Proper Operation of the unit is shown with a Red or Green LED light
on the face of the unit (color variants do not affect Functionality of Unit).
If the Ballast fails, or if power to the unit has been powered off/
disconnected, the UV light will be off. If the UV lamp fails, the Red or Green
LED light will also be off.
Disposal Of The NCC Cell
Please do not throw the used NCC Cells in the garbage.
The special germicidal UV bulb used in the CASPR MEDIK contains some
insignificant amount of mercury. Contact your local Waste Management Center
for a proper disposal procedure.
Changing The NCC Cell
-
Remove the Unit Power Cable from the receptacle or ensure the unit isn’t powered.
-
Twist the Ballast Housing counter-clockwise to unlock the unit from the mounting plate.
Pull the unit from the duct. -
Remove the (2) Screws holding the NCC Cell in place and remove the NCC Cell from the Unit Cover. WARNING: While removing the old bulb, be cautious about “rocking” it back and forth as that may damage the ceramic bulb socket. To avoid damage, pull the bulb straight out without any lateral motion.
Changing The NCC Cell -
Exchange the Old NCC Cell with the new NCC Cell and replace the (2) Screws that hold it in place.
-
Replace the Unit in the duct and turn clockwise to lock in place.
-
Place the Unit Power Cable back into the receptacle or repower your unit.
Warranty Information
NDS Sales LLC d/b/a CASPR Technologies (as “Seller”) offers the following
Express Limited Warranty to a buying customer (a “Buyer”) of a CASPR product
(the “Product”):
Seller warrants to Buyer that (a) the Product will be free from defects caused
by faulty workmanship or materials for three years from date of purchase when
operated under normal conditions and in accordance with Seller’s recommended
use (the “Product Warranty Period),” and that (b) the Components (comprised of
a bulb and a cell) will be free from defects caused by faulty workmanship or
materials for one year from date of purchase when operated under normal
conditions and in accordance with Seller’s recommended use (the “Components
Warranty Period).”
SELLER EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR
IMPLIED.
Should Buyer discover a covered defect within the Product Warranty Period or
the Components Warranty Period, Seller will repair or replace (at Seller’s
cost) the Product and/or the Components. Buyer’s sole and exclusive remedy for
Product or Components defects is limited to repair or replacement.
To confirm coverage or to schedule repair or replacement under this Express
Limited Warranty, Buyer should contact Seller at www.casprtech.com/warranty
and provide the serial number located on the Product and proof of purchase.
Absence of a serial number or proof of purchase may void the Express Limited
Warranty.
This Express Limited Warranty does not extend to or cover Product damage
caused by accident, fire, flooding, exposure to temperature extremes, abuse,
misuse, improper or unauthorized installation, modification, misapplication,
or repairs performed by persons other than Seller. Repairs performed by
persons other than Seller or Seller’s authorized representative will void the
Express Limited Warranty.
This Express Limited Warranty does not extend to or cover incidental or
consequential damages incurred by Buyer arising from, related to, or in
connection with, any Product or Components defects, including but not limited
to downtime costs, loss of use, loss of revenue, and/or loss of profits.
SALES THROUGH DISTRIBUTOR OR RESELLER
To the extent the Product is purchased by Buyer from an authorized CASPR
distributor or reseller, this Express Limited Warranty passes through to
Buyer.
FOR U.S. APPLICATION ONLY
Product warranties are governed by state and federal laws and may vary from
state to state. This Express Limited Warranty provides Buyer with specific
assurances regarding repair or replacement of the Product.
Other warranties are expressly negated.
FOR CANADIAN APPLICATION ONLY
Canadian, provincial, and territorial sales laws may govern implied
warranties.
This Express Limited Warranty provides Buyer with specific assurances
regarding repair or replacement of the Product. Other warranties are expressly
negated. Should there be a difference between this Express Limited Warranty
and Canadian law regarding implied warranties, Canadian law will control.
www.casprTech.com
Corporate Office
1343 W. Causeway
Approach
Mandeville, LA
US 70471
1-844-717-8819
info@casprtech.com
V.IN-M-MED-03-08012023
Documents / Resources
|
CASPR TECHNOLOGIES MEDIK Hospital-Grade Air and Surface
Purifier
[pdf] Owner's Manual
MEDIK Hospital-Grade Air and Surface Purifier, Hospital-Grade Air and Surface
Purifier, Grade Air and Surface Purifier, Air and Surface Purifier, Surface
Purifier, Purifier
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>