DIGITUS DN-652101-1 Industrial Gigabit Media Converter User Manual
- June 12, 2024
- DIGITUS
Table of Contents
DIGITUS DN-652101-1 Industrial Gigabit Media Converter
Product Information
The DIGITUS Industrial Gigabit Media Converter RJ45 is a high-quality device designed for reliable data transmission in industrial environments. It utilizes a photoelectric integration module to provide excellent optical and electrical characteristics. With support for full duplex or half duplex mode and automatic negotiation capability, this media converter ensures efficient and seamless connectivity. It also features automatic cross-identification for network ports and supports a variety of protocols. With an average trouble- free work time of over 300,000 hours, this media converter is built to withstand industrial operating conditions. It operates on a power supply of DC 12-48V (reverse protection) or DC 48-57V (PoE version).
Package Contents
- Industrial switch – 1 piece
- User manual – 1 piece
Specifications
Standard Interface:
- IEEE802.310BASE-T; IEEE802.3i 10Base-T; IEEE802.3u; 100Base-TX/FX;
- IEEE802.3ab1000Base-T; IEEE802.3z1000Base-X; IEEE802.3x IEEE802.3af, IEEE802.3at (DN-652104-1)
Ports:
- 1-Port 10/100/1000Mbps RJ45
- 1 Port 1000Mbps Optical SC or SFP slot
Switch Panel
The switch panel consists of a side panel and a front panel. Theside panel includes connecting terminals (P1 and P2) and earthing screw for equipment grounding. The front panel features LED indicators, including a LINK light (yellow) to indicate established connection and data transmission, a PoE light (green) to indicate power supply to PD devices (PoE DN-652104-1 only), a Link/Act light (green) for optical connection, and a power indicator light.
Interface Definition
10/100/1000Base-TX Ethernet Interface
The Ethernet port of the switch supports automatic MDI/MDI-X operation. For
direct connection to a PC or server or connection to other switches or hubs,
use a straight line (MDI) with the following pin connections: 1-1, 2-2, 3-3,
6-6, 4-4, 5-5, 7-7, 8-8.
For connection to the MDI-X port of a switch or hub, use cross lines with the
following pin connections: 1-3, 2-6, 3-1, 6-2, 4-7,5-8, 7-4, 8-5.
1000Base-FX Ethernet Interface
The DIGITUS Industrial Gigabit Media Converter RJ45 offers different
options for the 1000Base-FX Ethernet interface:
- DN-652101-1: 1000Base multi-mode dual-fiber SC module, 850nm, supports cabling up to 2Km.
- DN-652102-1: 1000Base single-mode dual-fiber SC module, 1310nm, supports cabling up to 20Km.
- DN-652103-1 and DN-652104-1: 1000Base SFP modules.
Product Usage Instructions
-
Connect the DIGITUS Industrial Gigabit Media Converter RJ45 to
a power supply of DC 12-48V (reverse protection) or DC 48-57V (PoE
version). -
Connect the Ethernet port of the media converter to other
Ethernet terminal devices using network cables. Use a straight line (MDI) for direct connections or a cross line (MDI-X) for connections to switches or hubs. -
For the 1000Base-FX Ethernet interface, choose the appropriate module based on the desired cabling distance and fiber type.
Connect the module to the media converter using SC connectors or SFP modules. -
Observe the LED indicators on the front panel to ensure proper connection and data transmission.
DIGITUS Industrial Gigabit Media Converter RJ45
Manual
DN-652101-1&DN-652102-1
DN-652103-1&DN-652104-1
Introduction
This series of industrial media converter with 1 port 10/100/1000Mbps RJ45 +1 port 1000Mbps Optical meets CE and RoHS standards. With operating temperature of 40 ~ 80 ℃℃, the switches can be adapted to all kinds of harsh environment and also placed in the compact space of the control box. The installation characteristics of the guide rail,wide temperature operation, IP40 protection class housing and LED indicator light make the media convertor a plug-and-play industrial-grade device, providing a reliable and convenient solution for users to network their Ethernet devices.
Features
- The use of high-quality photoelectric integration module to provide good optical and electrical characteristics
- Ensure reliable data transmission and long working life
- Support full duplex or half duplex mode, with automatic negotiation capability
- Network port support automatic cross-identification
- Internal storage and forwarding mechanisms, support a variety of protocols
- In line with industrial operating standards, the average trouble-free work in more than 300,000 hours
- Working power supply:
DC 12 48 V to provide reverse protection
DC 48 57V for PoE version DN DN 652104 1
Package Contents
- In dustrial switch 1pcs
- User manual 1pcs
Specifications
Standard
| IEEE802.310BASE-T; IEEE802.3i 10Base-T; IEEE802.3u; 100Base-TX/FX; IEEE802.3ab1000Base-T; IEEE802.3z1000Base-X; IEEE802.3x IEEE802.3af,
IEEE802.3at (DN-652104-1)
---|---
Interface| 1-Port 10/100/1000Mbps RJ45
1 Port 1000Mbps Optical SC or SFP slot
IEC61000-4-6
(CS):
| 3V (10kHz-150kHz); 10V (150kHz-
80MHz)
---|---
IEC61000-4-16
(Common mode conduction):
| ****
30V (cont.), 300V (1s)
Frequency
range:
| 150kHz-80MHz
Impact:| IEC 60068-2-27
Free Fall:| IEC 60068-2-32
Vibration:| IEC 60068-2-6
Switch Panel
Side panel:
P1 and P2 are the number of connecting terminals P+1 and P 1 are respectively
to the positive and negative poles to be connected; Earthing screw, used for
earthing equipment.
Front panel:
The yellow LED on the RJ45 port is the LINK light,which is on when the
connection is established and the data transmission is flashing. The green
light on the RJ45 port is PoE light, which is only on when the switch port is
supplying power to the PD devices (PoE DN 652104 1 o only) Link/Act is green
color when optical connection.
Power indicator light is on when connecting with Power.
Switch size mm
Interface Definition
10/100 1000Base TX ethernet interface
This series of switches provides MDI/MDI X self-identification
with cable support on all 10/100/1000Bas e TX ports. In use, the Ethernet port
of the switch can be connected with other Ethernet terminal devices through
network cables (direct or cross). Please use Class 5 shielded twisted pair.
The Ethernet port pin definition is shown in the following figure:
RJ45 port supports automatic MDI/MDI X operation, you can use a straight line to connect to the PC or server, connect to other switches or hubs. In the through line (MDI), pins 1, 2, 3, 4, 5, 6, 7, 8 correspond to the connection; For the MDI X port of a switch or hub, cross lines are used: 1 3, 2 6, 3 1, 6 2, 4 7, 5 8, 7 4, 8 5.10Base T/100Base T (X) pins are defined as follows:
| Pin No. | MDI sighal | MDI-X signal |
|---|---|---|
| 1 | TX+ | RX+ |
| 2 | TX- | RX- |
| 3 | RX+ | TX+ |
| 6 | RX- | TX- |
| 4,5,7,8 | – | – |
Note: “Tx ±” refers to send data ±,”Rx ±” refers to received data ±, and ” “–” refers to unused
2 100 0 base FX ethernet interface
- DN 652101 1: 1000Base multi-mode dual fiber SC module 850nm, 2Km cabling
- DN 652102 1: 1000Base single mode dual fiber SC module, 1310nm, 20Km cabling
- DN 652103 1: 1000Base SFP module.
- DN 652104 1: 1000Base SFP module.
Patch cord classification
According to the transmission mode of light in the fiber, it can be divided
into multi-mode fiber and single-mode fiber.Multimode fiber has a thick glass
core (50 or 62.5μm), which can transmit light in various modes.However, the
high inter-mode dispersion limits the frequency at which digital signals can
be transmitted, so multimode fibers can be transmitted over relatively close
distances (typically only a few kilometers).
The single-mode fiber has a very thin glass core (core diameter, usually 9 or
10μm) and can transmit only one mode of light. Therefore, its inter-module
dispersion is very small, and it is suitable for remote communication.Under
normal circumstances, the skin is orange for multi-mode, yellow for single-
mode.
LED Indicator
| LED indicator | Status | Definition |
|---|
Power
| Red LED on| Power supplying in
normal
Red LED off| Power supply abnormal
or no powering
Link/ Act
| ****
RJ45
| Yellow LED
on
| Network connection in
normal
Yellow LED
flashing
| Link communication in
normal
Optical
| Green LED flashing| Optical link communication in
normal
Green LED
off
| Optical no
communication
PoE
| Green LED
on (RJ45)
| PoE work in normal
Green LED
off (RJ45)
| No PoE work
Installation caution
Installation precautions
In order to avoid damage to equipment and personal injury caused by improper
use, please follow the following precautions:
- In order to avoid damage caused by falling of the equipment, please p ut the equipment in a stable environment.
- When supplying power to the equipment, pay attention to confirm the range of power supply voltage, as well as the positive and negative poles of the power supply, so as not to damage th e equipment by wrong operation.
- In order to reduce the risk of electric shock, ensure that the equipment is well grounded in the working environment.
- No matter when, please do not arbitrarily remove the equipment shell.
- When placing the switch, please avoid the area with dust and strong electromagnetic interference
Din rail installation
The first step is to check the grounding and stability of the guide rail: the
guide rail slot of the switch is clamped into the guide rail; the second step:
from the center to both sides of the guide rail positioning screws in order.
Step 3: Use screws to fix the mounting rail card slot on the fixed guide
groove at both ends of the guide rail to ensure that the guide rail and the
switch are fixed on the guide rail vertically and stably.
Grounding
Fix the grounding wire to the grounding screw above the switch, and ensure
good reliable connection of the grounding system.
Power Connection
Insert the power cord into the specified position of the 6 core terminal and
insert the terminal into the standard power supply inlet (P+1 and P 1 input
corresponding to the first power supply P1, and P+2 and P 2 input
corresponding to the second power supply P2). The available voltage standard
of the power supply is supported from 12VDC to 48 VDC (48VDC to 57VDC for DN
652104 PoE support)
This is a Class A product. In home environment, this product may cause radio
interference. In this case, the user may be required to take appropriate
measures.
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid, Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>