Bestway 43720 Rainbow Dreams 2 Person Inflatable Pool Island 1.75 m x 1.63 m Owner’s Manual
- June 16, 2024
- Bestway
Table of Contents
Bestway 43720 Rainbow Dreams 2 Person Inflatable Pool Island 1.75 m x
1.63 m
Product Information
Specifications
- Dimensions: 2.51m x 1.32m / 99 x 52 (Item No: 43279)
- Dimensions: 2.22m x 1.75m / 87 x 69 (Item No: 43119)
- Dimensions: 2.21m x 1.74m / 87 x 68.5 (Item No: 43297)
- Dimensions: 2.51m x 1.32m / 99 x 52 (Item No: 43113)
- Dimensions: 1.96m x 1.93m / 77 x 76 (Item No: 43534)
Product Usage Instructions
Inflation
- Before using the product, carefully check if there are any leaks or broken parts.
- Open the valve and inflate with an air pump (not included) to the design working pressure of 0.03 bar.
- Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard.
Deflation
To deflate the product, open the valve and allow the air to escape.
Maintenance and Storage
- After deflation, use a damp cloth to gently clean all surfaces. Do not use solvents or other chemicals that may damage the product.
- Store the product in a cool, dry place and out of children’s reach.
- Check the product for damage at the beginning of each season and at regular intervals when in use.
Repair
If a chamber is damaged, follow these steps to repair:
- Clean the area to be repaired.
- Carefully peel the provided repair patch.
- Press the patch over the area to be repaired.
- Wait 30 minutes before inflating the product again.
FAQ
-
Q: Can children use this product?
A: This product is not suitable for children under a certain age. Please refer to the instructions for the specific age recommendation. -
Q: What is the maximum load capacity of this product?
A: The maximum load capacity of this product is specified in kilograms. Please refer to the instructions for the exact value. -
Q: How far should this product be from the shore during use?
A: It is recommended to maintain a safe distance of 10 meters from the shore when using this product. -
Q: Can this product be used in offshore wind or currents?
A: This product is not designed for use in offshore wind or currents. Please avoid using it in such conditions.
Package of content
Instruction
A WARNING
B PROHIBITION
C MANDATORY
-
NO PROTECTION AGAINST DROWNING
-
DESIGN WORKING PREESURE: 0.03 BAR
-
DO NOT USE IN OFFSHORE WIND
-
DO NOT USE IN OFFSHORE CURRENT
-
NOT FOR CHILDREN … YEARS OF AGE AND BELOW, APPLY ONLY TO CHILDREN ABOVE …
YEARS OF AGE -
READ INSTRUCTIONS FIRST
-
NUMBER OF USERS, … ADULT
-
SWIMMERS ONLY
-
MAXIMUM LOAD CAPACITY … KG
-
SAFE DISTANCE TO SHORE 10M
-
ALWAYS SUPERVISE CHILDREN IN WATER
-
POOL USE ONLY
-
FULLY INFLATE ALL AIR CHAMBERS
-
DEVICE PROVIDES FLOATING STABILITY
-
DEVICE REQUIRES BALANCING
For detailed information please refer to the following table:
WARNING
Non-compliance with these operating instructions may expose you to serious
danger.
- ATTENTION! NO PROTECTION AGAINST DROWNING!
- SWIMMERS ONLY!
- Evenly distribute loads when use the product. Tipping and drowning may occur with uneven distribution of loads.
TECHNICAL SAFETY INSTRUCTIONS
Read the manual and follow the instructions relating to safety tips, correct
and complete product assembly, setting into service, use and maintenance.
For your own safety, always heed the advice and warnings in these
instructions.
Only use the product in the places and conditions for which it is intended.
- Full inflate all air chambers.
- Passenger numbers and load weight shall by no means exceed passenger number and maximum weight capacity in specifications.
- This product should not be used as life saving device.
- Life-saving device (life jacket and life buoy) must be prepared together and inspected.
- Keep away from flames and fires.
- Before every use, carefully inspect all product components, to ensure everything is in good condition and tightly secured. Please stop to repair if you find any damage.
- Be careful when landing on the ground. Sharp and rough objects such as rocks, cement, shells, glass, etc. may punctured the product.
- Don’t leave the product exposed to sun for long periods of time, as high temperatures shall give rise to air expansion, which can cause irreparable damage.
- Never leave in or near the water when not in use.
INFLATION
-
Before using the product, carefully check if there are any leaks or broken parts.
Open valve and inflate with the air pump (not include) to design working pressure on the product. -
Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. If you use other pressure gauge, the pressure should not be more than the specified pressure on the product or on the instruction. Do not over-inflate the product. Do not use an air compressor.
NOTE : Under and over-inflation of the product will result in safety hazards. It is better to check the pressure of the product each time before using. -
Be sure to close the valves after inflation, press in the safety valves after inflation.
NOTE : Never stand on or rest objects on the product during inflation. Always check product for leaks before use. -
Thread the rope through the grommets around the outside of the island one by one. (Only for product with rope)
NOTE : Tighten rope for a tight fit around product or loosely tie for loose fit for flexible grip. -
Place the cooler bag inside its holder in the island (only for product with cooler bag).
MAINTENANCE AND STORAGE
-
After deflation, use a damp cloth to gently clean all surfaces.
NOTE : Never use solvents or other chemicals that may damage the product. -
Store in a cool, dry place and out of children’s reach.
-
Check the product for damage at the beginning of each season and at regular intervals when in use.
REPAIR
If a chamber is damaged use the provided repair patch.
- Clean area to be repaired.
- Carefully peel patch.
- Press patch over area to be repaired.
- Wait 30 minutes before inflation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>