UYGALAXY UYG-50 Linear Actuator Professional for Home and Industrial Instructions

UYGALAXY UYG-50 Linear Actuator Professional for Home and Industrial

SPECIFICATIONS

ALL SIZE CHART

DIMENSION OF ACCESSORIES

WARNING

1. The load added onto the actuator must be less than or equal to the rated load of actuator.
2. Install actuator so the force of the load acts in the center of the extension tube and the rear mounting adapter.

INSTALLATION

1. Mount the actuator by securing the top and bottom mounting holes to two fixed positions. The stroke length of the actuator (e.g. 12 inches) and the limitations of the particular application will determine the location of the fixed mounting positions
   IMPORTANT: Confirm that the 2-way movement of the linear actuator is smooth and within the actuator’s stroke length after it has been installed. Additionally, confirm that no obstacles exist along the travel path of the actuator.

2. Secure the top and bottom mounting holes of the linear actuator onto the two mounting fixtures using 5/16″ diameter bolts

3. Connect the red wire to the positive post and the block wire to negative post of the DC power supply

4. The operation of the linear actuator should be tested manually after the installation is completed.

Users should use caution to ensure that

• The travel distance of the actuator satisfies the requirement of the structural design
• The extended and retracted limit switches operate normally (The limit switches should stop the motor when the extension tube if fully retracted or fully extended)
• If the motor runs too slow or does not give full force, (1) the power supply is insufficient and needs to be increased or (2) the load being applied to the actuator is too great and needs to be
• duced to less than or equal to 225 lbs.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>