FUSION Juicer User Guide
- June 6, 2024
- FUSION
Table of Contents
**Quick Start Guide***
*See owner’s manual for complete instructions and important safety information before using this product.
Step 1
Remove Paper Protector
Lower Locking Bar and remove Lid. Discard paper protector from inside the
juicer. Wash all parts and reassemble. Replace Lid and secure Locking Bar.
Step 2
Line up Juice Spout Into Pitcher
Juicer Spout must be in a downward position when juicing to avoid leaking from
the sides of the machine. (Remember to line up the pitcher beneath the Spout.)
Step 3
Plug-In
Plug Power Cord into a 120-volt wall outlet. (This plug will fit only one way
in a polarized outlet.)
Step 4
Turn Power Switch “ON”
The switch will be illuminated when in the “ON” position. (Machine must be
turned on and running for approximately 5–10 seconds before the product is
inserted into the Chute.)
Step 5
Add Fresh Fruits and Vegetables
Remove Pusher and insert fresh fruits and vegetables. Push fruits and
vegetables gently through the Chute using the Pusher. (Pushing too hard or
overloading the chute may jam the motor.)
Step 6
Cleaning
For the easiest cleanup, wash juicer parts immediately after juicing. Place
dishwasher-safe parts on the top rack only.
NOTE: Sometimes you may need to clear up food excess when making large
quantities of juice. To do this: unplug unit, remove the lid, clean the blade
assembly, and pulp the Chute.
Wash All Components Before First Use.
FJ_JACK 100 _QUICKS__ENG_V2_171011
PARTS DIAGRAM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>