EVOLUTION POWERSPORTS 300DU0170 Spark Arrestor Instruction Manual
- June 4, 2024
- EVOLUTION POWERSPORTS
Table of Contents
300DU0170 Spark
Arrestor
Instruction Manual
SKU(s): (2.5”) 300DU0169, (3.0”) 300DU0170
INCLUDED PARTS
(1) EVP Spark Arrestor
REQUIRED TOOLS
5mm Allen Wrench
Step 1: Make sure the vehicle is cold and in the park.
Step 2: You will find the spark arrester on the exhaust exit, remove the
5mm Allen.
Step 3: Place the new spark arrestor into the exhaust and tighten the 5mm
Allen.
For Defender Spark Arrestor
Step 1: Make sure the vehicle is cold and in the park.
Step 2: Open the utility box.
Step 3: Remove the (3) bolts holding the exhaust tip on. Remove the
exhaust tip and gasket.
Step 4: Inside the exhaust tip, you will find the spark arrestor. Replace
the spark arrestor.
Step 5: Install the gasket and (3) bolts mounting the tip to the muffler.
Step 6: Close the utility box.
NOTE: After installing your new muffler, run the vehicle for at least 10
minutes without the spark arrestor screen installed. This is to make sure that
any loose fibers that are left inside the muffler during the manufacturing
process are cleared out of the system. Please re-install after this clean-out
period.
Reminder: It may not be legal to drive your side by side in certain areas
without a spark arrestor. It is the customer’s responsibility to see what
their local laws and regulations are.
WE’D LOVE TO HEAR FROM YOU –
LEAVE A REVIEW 8 STAY CONNECTED!
Documents / Resources
|
EVOLUTION POWERSPORTS 300DU0170 Spark
Arrestor
[pdf] Instruction Manual
300DU0170, Spark Arrestor, 300DU0170 Spark Arrestor, Arrestor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>