anslut 024727 LED Strip Light Instruction Manual

LED STRIP
OPERATING INSTRUCTIONS Original instructions024727

024727 LED Strip Light

EU DECLARATION OF CONFORMITY
Jula Item number
024727
Model no.: LS9A139-5M
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

This declaration of conformity is issued under the sole responsibility of the manufacturer.

RGB+CCT LED STRIP
SMART, 5M
Conforms to the following directives, regulations and standards:

V.2.2.3, ETSI EN
301489-17 V3.2.4, TSI EN 300328 V2.2.2, EN 62479:2010
Eco design Directive 2009/125/EC|
Lightsource Regulation (EU) 2019/2020, (EU) 2021/341, (EU) 2019/2015, (EU) 2021/340|
RoHS 2011/65/EU + 2015/863| EN 50581:2012

This product was CE marked in year:
Signed for and on behalf of  Skara 2022-11-09

FREDRIK BOHMAN
BUSINESS AREA MANAGER

https://smartapp.tuya.com/smartlife![anslut 024727 LED Strip Light

• Parts 5](https://manuals.plus/wp-content/uploads/2023/08/anslut-024727-LED- Strip-Light-Parts-5.png)

SAFETY INSTRUCTIONS

SYMBOLS

| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Double insulation (safety class II), does not need to be earthed.
| Actuator replaceable by qualified personnel.
| Non-replaceable light source.
| Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

DESCRIPTION

This is a SMART product that can be connected to existing WiFi and controlled via the app Smart Life, or with a voice assistant. Does not require a separate hub/router. You can control all SMART products in the app and use functions such as timer control,  scheduling and automatised events.
The LED strip is powered by the supplied power adapter that is plugged into a wall outlet. The LED strip is five metres long. The remote control runs on 1 x CR2025 battery. Cannot be shortened or modified.

PARTS

1. LED control unit
2. Infrared receiver
3. Connector
4. Mains adapter
5. LED strip with self-adhesive tape
6. Connection cable
7. Screws, 32x
8. Clips for LED strip, 15x
9. Clips for WiFi control unit, 2x
10. Battery CR2025
11. Remote control
12. 2×5 m self-adhesive tape for WiFi control unit (not shown in figure 1)

FIG. 1

SYSTEM REQUIREMENTS

Check that the smartphone is connected to the 2.4 GHz WiFi network and switch on the light. WiFi router. iPhone, iPad (IOS 11.0 or higher) or Android (5.0 or higher). Compatible with Google Assistant, Amazon Alexa etc.

ASSEMBLY

Assemble all the parts together as shown in figure 2.
FIG. 2

• When mounting on a wall or similar, the material that you screw into should be at least 12 mm thick.
• When mounting around corners, the LEDs should not be bent in the corners.
• Use the right clips for the different parts.

FIG. 3

REMOTE CONTROL

Functions

1. ON/OFF

2. White/colour changing RGB

3. Adjust brightness in static mode (10 steps higher, 10 steps lower).
   Adjust color-changing speed in dynamic mode (10 steps higher, 10 steps lower).

4. Colour changing RGB

5. Cold white light

6. Warm white light

7. Adjustment of brightness (CCT)

8. Modes:
   – Slow changing 3 colours
   – Random changing 3 colours
   – Slow changing 7 colours
   – Random changing 7 colours
   – Quick changing 3 colours
   – Pulsating brightness 3 colours
   – Slow changing warm white/cold white, random changing warm white/cold white.

9. Battery cover

10. Catch for battery holder.

FIG. 4

USE

INSTALL APP

1. Scan the QR code to download the Smart Life app. Or search at App Store or Google Play.
   FIG. 5

2. Register account with mobile phone number or email address. A verification code is sent with SMS or email. Enter the code in the app and choose a password. If you already have an account, log in using your mobile phone number or email address and  password.

3. Check that the smartphone is connected to the WiFi network and that the product is switched on.

4. The light source should flash rapidly in order to be connected to the Wi-Fi network. If the light does not flash rapidly when switched on with the power switch, press on/off three times in quick succession to reset the light source to pairing mode.

5. Click on + in the top right-hand corner of the home screen, then click on “Add Device”.
   FIG. 6

6. Select the product category (Lighting – Strip Lights WiFi) and then follow the instructions on the screen.
   FIG. 7

7. Enter the WiFi password and click on “Next” – “Confirm the indicator is blinking or breathing rapidly” – “Blink Quickly”.
   FIG. 8
   FIG. 9
   FIG. 10

8. Click on “Done” when the connection is completed. If the connection is successful, the light source will be shown in the app.
   FIG. 11

NOTE:
Do not disconnect the power supply to the strip when it is connected to WiFi.

DISMANTLING

Dismantle the LED strip’s components as shown in the figures 12-14.
FIG. 12
FIG. 13
FIG. 14
Cut with scissors in the middle of the solder joint.
FIG. 15
The light source can be tested with a 12 V battery.
FIG. 16

WWW.JULA.COM
© JULA AB 2023-05-08
JULA AB
BOX 363, 532 24 SKARA, SWEDEN

Documents / Resources

| anslut 024727 LED Strip Light [pdf] Instruction Manual
LS9A139-5M, 024727 LED Strip Light, LED Strip Light, Strip Light, Light
---|---

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>