Lambario LT45-09422 LED Light User Manual
- June 12, 2024
- LAMBARIO
Table of Contents
Lambario LT45-09422 LED Light
Product Information
- Model Number: LT45-09422
- Power: 150W
- Light Output: 13500 lumens
- LED Light Source: 12400 lumens
- Barcode: 8605036695378
- Energy Efficiency Class: Non-replaceable light source
- Control Gear: Non-replaceable
- Dimensions: 82.5mm x 142.5mm x 350mm
- Manufacturer Website: www.lambario.com
Product Usage Instructions
This product is suitable for a maximum daily usage of 10-12 hours. Using the product continuously for 24 hours per day would void the warranty.
To use the product, follow these steps:
- Ensure the product is connected to a power source.
- Turn on the power using the designated switch or button.
- The product will emit a light output of 13500 lumens.
Note : The light source and control gear of this product are non- replaceable. Please refer to the manufacturer’s website for any additional information or support.
This product contains a light source of energy efficiency class
FEATURES
Non-replaceable light source
Non-replaceable control gear
WARNING
For high bay lamp of UFO Series / 200-240 VAC 50/60Hz
-
Turn power off before inspection, installation or removal. Supply connection and other external wiring conductor shall The high bay lamp made of aluminium alloy & glass. 1P65. Suitable for wet locations.
Can be applied to high ceiling, workshop, warehouse etc. -
Installed suspension parts (derrick or chain hoist), and determine installation height. Suspension parts need to have enough strength enough to hang the weight of lamps.
-
Installed the hook to the body of high bay lamp.
-
Hanging the high bay lamp to the suspension parts. and tighten the screws
-
Tidy the lines. Turn on power and test the high bay lamp is right.
DIMENSION
WARNINGS
- Please read the usc:r guide carefully before you install or use lhe product.
- Before installation, please read and follow the technical specification and symbols shown in the product box.
- Before installing, make sure that the electrical power is disconnected
- The product is not suitable for regulating circuit breaker
- The product is not suitable for covering with thermo-insulating material
- Do not throw the product away from household waste. Please ask your municipality about how ta use it
- The product must be installed and maintained by qualified persons.
WARRANTY CONDITIONS
- If a defect occurs during the warranty period, U1e company is responsible for repairing it. If repair is not possible then the company must replace the product
- The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on lhe box or the usage guide.
- The Company shall not be liable for any injury or damage from improper use of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>