LAMBARIO LT46-09432 LED Highbay Light User Manual

USER MANUAL

LT46-09432 LED Highbay Light

21000 lm
**LED LIGHT *
SOURCE
22200 360° lm**

MODEL NO| ON POWER| VOLTAGE| WATT| IP| LUMEN| CCT| ENERGY CLASS| QR CODE| BARCODE
---|---|---|---|---|---|---|---|---|---
LT46-09432| 147| 220-240V| 150W| IP65| 21000| 6000K| D| | 8605036696955

https://eprel.ec.europa.eu/qr/1028316
This product contains a light source of energy efficiency class

Mounting intructions

Suitable for a maximum use of 10-12 hours daily usage of the product, for 24hours per day would void the warranty

|
---|---
Replaceable (LED only) light source by a professional| Replaceable control gear by a professional

Lifetime: Up to 50,000 hours
IP Rating: IP65
Tools Required:
Flat-blade screwdriver
May need some of the power cable

Specifications

Notice
Read thoroughly before installing. the luminaire shall be installed by a qualified electrician,and hand over these introductions to user for maintenance afterwards.
WARNING
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Turn off the main power before maintenance.
If not, may cause the risk of electric shock and fire.
Check the strength of installation material.
If installed incorrectly.may cause the luminaire to drop down.
Having issued this warning the company accepts NO responsibility for issues arising from any failure to comply with this clear instruction. The Corp Will not accept responsibility for any other issues arising from improper use or fitting of this product as these matters are beyond our control.
Warranty:
This product is warranted from manufacturing defect only. This warranty is Cvalid for 5 year from the date of purchase. This warranty does not aCpply to damage caused by user wrong installation or abnormal wear and tear. The Corp gives no warranty against damage to any surface due to incorrect removing or applying this product.!WARNING
For high bay lamp of UFO Series / 200~240 VAC 50/60Hz

1. Turn power off before inspection, installation or removal.
   Supply connection and other external wiring conductor shall be at least 1.0 mm 2 and confirm to 60227/EC52..
   The high bay lamp made of aluminium alloy & glass.
   IP65. Suitable for wet locations.
   Can be applied to high ceiling, workshop, warehouse etc.
   Suspension parts need purchased from other way!

2. Installed suspension parts (derrick or chain hoist) , and determine installation height. Suspension parts need to have enough strength enough to hang the weight of lamps.

3. Installed the hook to the body of high bay lamp.

4. Hanging the high bay lamp to the suspension parts and tighten the screws.

5. Connect the power lines.

6. Tidy the lines. Tum on power and test the high bay lamp is right.

WARNINGS

1. – Please read the user guide carefully before you install or use the product.
2. – Before installation, please read and follow the technical specification and symbols shown in the product box.
3. – Before installing, make sure that the electrical power is disconnected
4. – The product is not suitable for regulating circuit breaker
5. – The product is not suitable for covering with thermo-insulating material
6. – Do not throw the product away from household waste. Please ask your municipality about how to use it.
7. – The product must be installed and maintained by qualified persons.

WARRENTY CONDITIONS

1. If a defect occurs during the warranty period, the company is responsible for repairing it. If repair is not possible then the company must replace the product.
2. The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on the box or the usage guide.
3. The Company shall not be liable for any injury or damage from improper use of the product.

www.lambario.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>