LAMBARIO LT45-09122 Reflectro Highby Instruction Manual
- June 12, 2024
- LAMBARIO
Table of Contents
USER MANUAL
9000Im
*LED LIGHT SOURCE 8300
110º Im
Mounting Instructions**
LT45-09122 Reflectro Highby
| MODEL NO | ON POWER | VOLTAGE | WATT | IP | LUMEN | CCT | ENERGY CLASS | BARCODE |
|---|---|---|---|---|---|---|---|---|
| LT45-09122 | 94 | 220-240 V | 100W | IP65 | 9000 | 5000K | F | 8605036695361 |
This product contains a light source of energy efficiency class
Suitable for a maximum use of 10-12 hours daily usage of the product, for
24hours per day would void the warranty
|
---|---
Non-replaceable light source| Non-replaceable control gear
1. WARNING
For high bay lamp of UFO Series / 200~240 VAC 50/60Hz
-
Turn power off before inspection, installation or removal. Supply connection and other external wiring conductor shall be at least 1.0 mm 2 and confirm to 60227IEC52..
The high bay lamp made of aluminium alloy & glass.
IP6S. Suitable for wet locations.
Can be applied to high ceiling, workshop, warehouse etc.
Suspension parts need purchased from other way! -
Installed suspension parts (derrick or chain hoist) , and determine installation height. Suspension parts need to have enough strength enough to hang the weight of lamps.
-
Installed the hook to the body of high bay lamp.
-
Hanging the high bay lamp to the suspension parts and tighten the screws
-
Connect the power lines.
-
Tidy the lines. Turn on power and test the high bay lamp is right.
WARNINGS
- Please read the user guide carefully before you install or use the product.
- Before installation, please read and follow the technical specification and symbols shown in the product box.
- Before installing, make sure that the electrical power is disconnected
- The product is not suitable for regulating circuit breaker
- The product is not suitable for covering with thermo-insulating material
- Do not throw the product away from household waste. Please ask your municipality about how to use it.
- The product must be installed and maintained by qualified persons.
WARRENTY CONDITIONS
- If a defect occurs during the warranty period, the company is responsible for repairing it. If repair is not possible then the company must replace the product.
- The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on the box or the usage guide.
- The Company shall not be liable for any injury or damage from improper use of the product.
Documents / Resources
|
LAMBARIO LT45-09122 Reflectro
Highby
[pdf] Instruction Manual
LT45-09122, LT45-09122 Reflectro Highbay Light, Reflectro Highbay Light,
Highbay Light, Light
---|---