LAMBARIO LT46-09132 LED Lamp User Manual

: June 12, 2024
: LAMBARIO

Table of Contents

LT46-09132 LED Lamp
Specifications
WARNINGS
WARRANTY CONDITIONS
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

*USER MANUAL 14000 lm
LED LIGHT SOURCE 14800 360°lm
Mounting Instructions**

LT46-09132 LED Lamp

MODEL NO| ON POWER| VOLTAGE| WATT| IP| LUMEN| CCT| ENERGY CLASS| QR CODE| BARCODE
---|---|---|---|---|---|---|---|---|---
LT46-09132| 98.5| 220-240V| 100W| IP65| 14000| 6000K| D| | 8.60504E+12

https://eprel.ec.europa.eu/qr/1028231
This product contains a light source of energy efficiency class

|
---|---
Replaceable (LED only) light source by a professional| Replaceable control gear by a professional

Lifetime:Up to 50,000 hours
IP Rating:IP65
Tools Required:
Flat-blade screwdriver
May need some of the power cable

Specifications

Model No.	LT46-09132	I LT46-09432	I LT46-09632
Rated Power	100W	150W	200W
Input voltage	AC100-240V 50/60Hz
Input current	0.75A	1.12A	1.5A
Power factor	>0.9	>0.9	>0.9

Notice
Read thoroughly before installing. the luminaire shall be installed by a qualified electrician,and hand over these introductions to user for maintenance afterwards.
WARNING
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Turn off the main power before maintenance.
If not, may cause the risk of electric shock and fire.
Check the strength of installation material.
If installed incorrectly.may cause the luminaire to drop down.
Having issued this warning the company accepts NO responsibility for issues arising from any failure to comply with this clear instruction. The Corp Will not accept responsibility for any other issues arising from improper use or fitting of this product as these matters are beyond our control.
Warranty:
This product is warranted from manufacturing defect only. This warranty is Cvalid for 5 year from the date of purchase. This warranty does not aCpply to damage caused by user wrong installation or abnormal wear and tear. The Corp gives no warranty against damage to any surface due to incorrect removing or applying this product.

1.!WARNING
For high bay lamp of UFO Series / 200~240 VAC 50/60Hz

Turn power off before inspection, installation or removal. Supply connection and other external wiring conductor shall be at feast 1.0 mm 2 and confirm to 60227/EC52..
The high bay lamp made of aluminium alloy & glass. IP65. Suitable for wet locations.
Can be applied to high ceiling, workshop, warehouse etc.
Installed suspension parts (derrick or chain hoist), and determine installation height. Suspension parts need to have enough strength enough to hang the weight of lamps.
Installed the hook to the body of high bay lamp.
Hanging the high bay lamp to the suspension parts. and tighten the screws
Connect the power lines.
Tidy the lines. Turn on power and test the high bay lamp is right.

WARNINGS

Please read the user guide carefully before you install or use the product.
Before installation, please read and follow the technical specification and symbols shown in the product box.
Before installing, make sure that the electrical power is disconnected
The product is not suitable for regulating circuit breaker
The product is not suitable for covering with thermo-insulating material
Do not throw the product away from household waste. Please ask your municipality about how to use it.
The product must be installed and maintained by qualified persons.

WARRANTY CONDITIONS

If a defect occurs during the warranty period, the company is responsible for repairing it. If repair is not possible then the company must replace the product.
The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on the box or the usage guide.
The Company shall not be liable for any injury or damage from improper use of the product.

www.lambario.com