LAMBARIO LS02-00500 LED Strip Light User Manual
- June 12, 2024
- LAMBARIO
Table of Contents
LAMBARIO LS02-00500 LED Strip Light
Direction of install led strip light
- Turn off the power.
- Work with special power cord input 220V, no need any LED driver.
- Soft body, can be shaped, and suitable for any surface.
- Can work much longer, cut in meter at the mark, normally 50M with one power cord for 5050.
- Easy installation, low cost and full set of fixtures.
- Waterproof, can be used outdoor, IP65.
Safety Directions
- Before starting the installation, please ensure the power off.
- Please do not look at the light bulb directly.
- If you need any more information contact the seller.
- This product is made of copper, PVC.
WARNINGS
- Please read the user manual carefully before installing or using the product.
- Before installation please read and follow technical specification and symbols indicated on the product box.
- Before installation ensure that electricity is turned off.
- Product is not suitable for dimmer switches.
- Product is not suitable for covering thermally insulating material.
- Do not dispose with household waste. please ask your local municipality for the way of utilization.
- Product must be installed and maintenanced by qualified person.
WARRANTY TERMS
- lf any defect due to faulty product occurs within the warranty period, company is responsible for repair. If repair is not possible company may replace the product.
- Warranty is valid only provided that the product has been handled properly in accordance with the warnings, symbols, and/or technical specifications indicated on the box or user manual.
- Company is not responsible for injuries and damages resulting from improper use of the product.
www.lambario.com
Made in P.R.C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>