Avantree BTSP-870 Boombyte Portable Radio Speaker User Manual

June 12, 2024
Avantree

Avantree BTSP-870 Boombyte Portable Radio Speaker User Manual

Contact Us

Support Tickets avantree.com/submit-a-ticket
Support Email support@avantree.com
USA / CA +1800 232 2078 (9am-6pm PST, Mon-Fri )
UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
Live Chat avantree.com (18/h weekday)
Video Guide avantree.com/boombyte/video
FAQ avantree.com/support/boombyte
Product Registration avantree.com/product-registration

Product Overview

Avantree BTSP-870 Boombyte Portable Radio Speaker User Manual - Product
Overview

Button Functions

Avantree BTSP-870 Boombyte Portable Radio Speaker User Manual - Button
Functions

Use as an FM Radio

Step1: Turn on the Boom byte
Rotate the volume control clockwise to ON; the LCD screen will light up. For 1st time use, it will start auto-scanning for channels. If not, press and hold the FM button to start auto-scanning. Please wait until the auto-scanning complete.
Step 2: Tune into channels
Press the <SEEK / SEEK> buttons to choose your desired channel. Or you can directly input the channel frequency using the number pad, e.g., for FM102.5, press the number sequence 1-0-2-5. Or press and hold the <SEEK / SEEK> button, it will scan up / down for the next clear channel.
Step 3: Save and play your favorite channels
Save channels to the number pad for quick access – Find local FM channels as described above, then save any channel for quick access by pressing and holding the number pad until the screen displays “Channel Saved”. You can save up to 9 channels. Play the saved channels – Click the corresponding number pad button once.

Use as a Bluetooth Speaker

Pair and connect – Turn the speaker on, press the MODE button once to enter Bluetooth speaker mode, and then activate Bluetooth on your device (i.e., phone, tablet, laptop etc.) and search for “Avantree Boombyte” to pair and connect. To reconnect – Each time you turn it on and enter Bluetooth mode, the speaker should automatically reconnect to the last connected device. If not, select “Avantree Boombyte” on your device.

Use as a MicroSD Card Player

When you insert a microSD card (not included) while the radio is on, it will automatically switch to microSD mode. If you insert the card when the radio is off, you’ll need to press the MODE button to switch to microSD mode. The Boombyte supports MP3 / WMA / WAV file formats, and the max storage capacity of the SD card is 32GB. Repeat / shoe settings – Press the ⚙ button to enter the settings menu and press the ⚙ again to enter “Repeat / Shute”. Press the to select your desired option and press ⚙ once to conormal.

Use as a U Disk Player

Instructions are the same as the MicroSD card player above, except swap MicroSD card for U Disk.

Charging

A ? icon will flash on the Boombyte’s screen to indicate low battery. You can charge the radio using any USB adapter with a 5V/0.5-1A output (i.e., your phone charger or similar) via the included USB C charging cable. The icon on the LCD screen will flash while charging and stop once charging is complete. It takes about 3 hours to fully charge the radio.

Configuring the System Settings

Turn on the device and press & hold the OK button to enter the system settings. Press the <SEEK / SEEK> to select the desired option (Backlight, language, contrast, factory reset…) and press OK once to confirm.

FAQ

Below are some of the most common questions people have during setup.
Why is my FM reception so bad? Why is my microSD card not working?
For answers to questions like these and for a full FAQ list, you can visit avantree.com/support/boombyte, or you can contact us directly for additional assistance.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals