Dongguan Huoleme Technology A1 Flame Atmosphere Speaker User Manual
- June 6, 2024
- Dongguan Huoleme Technology
Table of Contents
Dongguan Huoleme Technology A1 Flame Atmosphere Speaker
Attention
In order to use the speaker correctly and ensure the good performance of the speaker, please read carefully and observe below instructions.
- Please do not impact the mainframe seriously
- Please do not contact benzene, diluent and other chemicals
- Please do not use close to a magnetic and electric ijeld
- Please avoid using in direct lighting and heating appliances
- Please do not repair or disassemble.
Technical Parameters
Applicable For Since buying date, the user enjoys one year fr<a?e repair services under normal use. After one year, will be charged according to each component part coste
- In case c;change component part,will be charged according to our company’s component part cost list.
- Th(! following situations without free repair services in warranty p.eriod
- Damage caused by natural e3rthciuake, rare disaster and no,mal use.
- Damage caused by transportation. fall, and unproper StOr’1gC.
- Consumable component su<.:h as spare parts, batteries. light bulbs, etc.
- Warranty lnformatiOr\ record is,,ot complete, no purchase date. no buying shop seal, etc.
- Featured using environment, such as humidity, sulfuric area, high salty and on board, easy colon ana. etc.
- 6. Using not according to the instructions.
- Sped. Offer
- When returning to factory for rep.:iirs, the user should make sure the product Is packed properly to avoid any damage during transportation.
- Factory is not responsible for the damages caused by the unproper disassemble,
Operation Method
Single Bluetoolh Speaker Operation: When the Bluelooth speaker is turned on.
you will hear •01• sound. and the Led light flashes, Search the device name “A
1 • in your Bluetooth devi<.:e. Once connected successfully, you will hear the
sound “DI’: and the white led lights steadily.
Double 81uetoolh Speaker Operation:lf using 2 Bluetooth speakers. tum on lhe
two Bluetooth speakers, the white led light flashes. Short press <.!) ON/OFF
button on one of the Bluetooth speakers. When the two Bluetooth speakers are
con,,ected, the two speakers will promt a ·01or•warning tone. One of the
speakers lamp will be lit after a successful connection, the Led lights
steadily {right channel), the main lamp on the other speakers Le-d light
flashes (leh channel). Search the device name “A 1” with device Bluetooth
speaker. Once connected successfully, you will hear the sound “DI: and the
white led lights steadily. Press any button on the two Bluatooth sp<a?akers.
The functions are the same, like volume +/-, prev song, next song and play
button. {Notlce:lf turned on and one bluetooth speaker Is COl’lnected to the
device successfully, if you want to turn on the other one, short press <.!)
ON/OFF buuon on the first one. lhe two speakers will promt a warning tone
DIDI” at the same time. The two speakers will not work at the same lime by
doing only a short press because it is not connected.
Bluetooth Speaker Mode
- ON/OFF Button: Long press this button for 2 seconds to turn ON/OFF the Slue tooth speaker; short press button to connect with the other Bluetooth speaker; Led llghl flashes means Bluetooth is turned on, steady light means
- Bluetooth connection successful.
- Next songN+ key: in Blue-tooth mode, quick pressing this key to skip to the next song, long press to increase the volume (when reaching the maximum volume, the speaker will say “di di”), {press+ – together to cancel pairing)
- Last song/V• Key: In Bluetooth mode pressing quickly will skip to the last song, long press to decrease the volume {when reaching the maximum volume, the speaker will say •di di”), (press+ – together to cancel pairing) Ml
- Play/Pau5e Key: Quick press to play/pause, long press is invalid
- lame Atmosphere Lamp ON/OFF key: quick press to turn ON/OFF the lamp; long press invalid
Charging Instructions
Attention
- Please do not charge the lamp under the temperature of 32•F-104’F.
- Avoid charging while using the device.
- Please pull•out the usb cable when fully charrged
- Oo not charge the lamp in high humidity situation.
Power Input Connect the USB cable into the lamp, when charging the indicator is red, if fully charged the indicator turns off.
Federal Communications Commission
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This radio is designed for and classified as “General population/uncontrolled Use”, the guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The exposure standard for wireless radio employs a unit of measurement known as the Specific Absorption Rate, or SAR, the SAR limit set 4W/kg. This device was tested for typical handheld operations with the back of the Mobile POS kept 0mm for limb. To maintain compliance with RF exposure requirements. The highest reported SAR value for use at the worn on the limb is 2.84W/kg.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>