OUMU IKF-T3 Wireless Headphones User Manual

OUMU IKF-T3 Wireless Headphones

Product Information

Specifications:

• Model: XYZ-2000
• Power: 1200W
• Capacity: 5 liters
• Dimensions: 10 x 12 x 8 inches
• Weight: 5 lbs

Product Usage Instructions

1. Initial Setup:
   Before using the product for the first time, ensure all parts are clean and dry. Place the product on a flat, stable surface near a power outlet.

2. Filling the Tank:
   Open the tank lid and fill it with water up to the maximum fill line indicated. Do not overfill the tank.

3. Powering On:
   Plug in the power cord and switch on the product using the power button. Allow the product to heat up for a few minutes.

4.  Using the Product:
   Once heated, you can start using the product for its intended purpose. Follow the specific instructions related to the product function you are using.

5.  Cleaning and Maintenance:
   After each use, make sure to unplug the product and allow it to cool down before cleaning. Use a damp cloth to wipe the exterior and follow specific cleaning instructions for internal components if necessary.

Frequently Asked Questions (FAQ)

• Q: How often should I clean the product?
  A: It is recommended to clean the product after each use to maintain optimal performance and hygiene.

• Q: Can I use any type of liquid in the tank?
  A: Only use water or recommended cleaning solutions specified in the user manual to avoid damaging the product.

Welcome
Thank you for using the iKF- T3. We hope you will enjoy it!

• Official package including
• Headphone*1
• Charging/Audio cable(TYPE- C USB)
• User manual*1

Before use

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Only use attachments/accessories specified by the manufacturer.
8.  Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

• Do NOT use the headphones at a high volume for any extended period.
• To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
• Turn the volume down on your device before placing the headphones on your ears, then turn the volume up gradually until you reach a comfortable listening level
• Do NOT use your headphones while driving for phone calls or any other purpose.
• Do NOT use the headphones with noise canceling on  any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc., and follow applicable laws regarding headphone use.
• Remove the headphones, or use the headphones with noise cancelling off and adjust your volume, to ensure you can hear surrounding sounds, including alarms and warning signals.
• Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.
• Do NOT use the headphones if they emit any loud unusual noise. If this happens, tum the headphones off and contact iKF customer service.
• Remove headphones immediately if you experience a warming sensation or loss of audio.
• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
• Do NOT use the headphones as aviation communication headsets.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
• Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product.
• Do NOT make unauthorized alterations to this product.
• Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
• If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice.
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
• Do NOT wear the headphones while charging.
• The headphones do not play audio while charging

Getting assistance.

• For assistance with this product, please contact our customer service at the website where you purchased the product, leave a message or email us, we will answer as soon as possible.
• Company: Dongguan Oumu Technology Co., Ltd. Address: Room 318, Building 4, Nanxin Industry International, Nancheng District, Dongguan City, Guangdong Province, China
• Website: http://ikf.net.cn/
• Email : supportikf@163.com

Warnings
When charging the headset, to avoid damage to the battery, it is recommended to use a 5V/2A charging head to charge. The power of the charging head should not exceed 24W. Avoid using car charger/fast charging power bank or charging head with unknown power for charging, there may be situations where charging cannot be performed or the power consumption is too fast and the signal is poor.

INSTRUCTION

SPECIFICATIONS

• Model: iKF-T3
• Bluetooth version: V5.3
• Power input: DC 5V
• Input parameters: 500mA
• Charging interface: TYPE- C USB
• Battery capacity: 1000mAh
• Charging time: about 2 hours
• Supporting agreement: HSP/HFP/A2DP/AVRCP

CHARGING

• For the first time use, please fully charge the product.
• Charging: The power indicator light is solid red
• Full power: The red light of the power indicator is off
• Charging time: 2 hours
• Low battery alarm: Voice prompt once when the battery is low.

LED indicator

• Power on: Signal light flashing white and green
• Power off: The signal light is white for 2 seconds
• Connection succeeded: light is not on
• Incoming call status: Green light is on every 10 seconds (When a call comes in, it will prompt the ringtone of the mobile phone synchronously, if the mobile phone does not support synchronization ringtone, prompt tone

POWER ON/OFF

• Power on: Long press the power button 2 seconds and hear the prompt that it is turned on;
• Power off: Long press the power button 3 seconds and hear the prompt that it is timed off;

HOW TO CONNECT

1. Long press the power button 2S and hear the prompt that it is turned on;
2. Open the Bluetooth interface of the mobile phone, search for “iKF- T3”, click to connect;
3. After the first pairing and connection is successful, the headset will automatically connect to the last mobile phone with a connection record every time it is turned on, and there is no need to repeat pairing.

iKF APP CONNECTION

Android phone connection

1. The headphone is turned on and the Bluetooth of the mobile phone is turned on, and the APP is running on the page
2. APP page pop- up window pops up the model, just connect
3. On the home page of the APP, click ” =3″ in the upper right corner to add a device
4. After automatically searching for the device, click “Connect”.

iKF APP CONNECTION

Android phone connection

1. The headphone is turned on and the Bluetooth of the mobile phone is turned on, and the APP is running on the page
2. APP page pop- up window pops up the model, just connect On the home page of the APP, click ” =3″ in the upper right corner to add a device
3. After automatically searching for the device, click “Connect”.

The iKF app requires a minimum operating system version of Android 6.1 for Android devices and iOS 12 for iPhones and iPads. To use the app, ensure that your Android device has Android 6.1 or a higher version, and your iOS device has iOS 12 or a higher version installed. This will ensure the compatibility and proper functioning of the ikF app on your mobile device.

BUTTON CONTROLS

• Listen to music with headset Play/Pause: [ Single tap l the power button;
• Volume up: | Single tap I the “+” button;
• Volume down: | Single tap I the “-” button;
• Next Track: Long press | 2S the “+” button;
• Previous Track: | Long press 1 2S the “-” button;
• Voice assistant: [ Triple-tap ) the ANC button;
  When the volume is adjusted to the maximum and minimum, a beep will appear.

Call with headset

• Answer incoming call: | Double-tap l the power button;
• Reject call: (Long press ) 2S the power button;
• End call: | Quadruple tap) the power button;

Noise reduction mode
Tap the “ANC” button cycle through “Al Anti-wind Noise Mode/ ANC (Active Noise Cancellation) Mode/Transparent Mode”

HiFi / Pop / Rock mode

• In order to bring a more diverse sound experience, iKF-T3 customizes three exclusive sound effects of “HiFi/Pop /Rock” for users to use.
• Switching modes: [Long press] “ANC” button to switch modes in sequence and hear prompts, it is switched successfully.
• The headphones turn on HiFi mode by default.

Game mode

• Turn on :Double-tap the “ANC” button, and you will successfully enter the game mode when you hear the prompt sound ;
• Turn off :Double-tap the “ANC” button, and you will successfully exit the game mode when you hear the prompt sound;

Movie mode

• Turn on or off movie mode through iKF APP.
• Movie mode and game mode cannot be turned on at the same time.

Reconnect/Reset

• In the power- off state, press and hold the power button for 5 seconds to enter the re- pairing state.
• The indicator light flashes alternately in white and green.

WIRED CONNECTION

The audio cable Type- C port is inserted into the headphone, the USB port is connected to the device you want to connect, the Bluetooth function is automatically turned off. *The USB AUDIO cable supports two functions of headphone charging and computer audio transmission.

EXTERNAL MICROPHONE

Insert the configured microphone into the microphone jack, Calls/voices are clearer. *In wired mode

TIPS

1. Make sure the headset and the connected device are within a valid connection range and there are not too many obstacles that interfere with the signal;
2. It is normal for the headset to be disconnected occasionally. Just like WiFi, occasionally the connection is unstable. It may be due to interference in signal transmission. Please wait a moment or change the location to resolve;
3. When the headset cannot be connected to the device, please check whether the headset has power or is connected to other devices;
4. Please fully charge the Headphone once a month. If the Headphone is not used for a long time, the battery of the Headphones may be damaged.
5. The sound insulation and sound leakage of headphones are related to the way of wearing the headphones and the volume of the headphones. You can adjust the wearing angle and degree of ear wrapping of the headphones in time according to the actual comfort of use. Please close the ear/head foam part of the headphone as much as possible.
6. Please use a standard- compliant charging head to charge the headset.
7. Do not wear the product for bathing, or use it in the rain, and do not soak the product in water. After each normal use, it is recommended to dry the sweat or stains on the headphone with a dry cloth, paper towel, etc., and then store it.

LIMITED WARRANTY

• Warranty period: 1 year from the date of product receipt During the warranty period of the product, due to the quality of the product itself, please contact us with the warranty card and shopping records to receive a return authorization / free maintenance and shipping instructions.

Fault Table

The following conditions will not provide free repair

1. Unauthorized maintenance, misuse, collision, neglect, abuse, accident, alteration, or damage or alteration of the appearance of the product;
2. The product exceeds the warranty period specified by the company;
3. Damage caused by self- disassembly;
4. Failures caused by accidents such as water ingress or falling, squeezing, etc;
5. Normal wear and dirt caused by use, such as scratches, damage caused by contact with chemical reagents, contact with sharp objects, etc;
6. Outer packaging and accessories, gifts, services other than the products promised by the sales staff, and additional configurations and gifts;
7. Improper storage: If the product is exposed to abnormal humidity and temperature for a long time, the performance is damaged;
8. Failure or damage caused by force majeure;

FCC Caution: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures”
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Focus on interesting musical products

• We apologize for any inconvenience caused by any typographical or translation errors. If the content is corrected later, please forgive us without notice.
• Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>